[PATCH 4/4 ] SCSI: Remove the AER section in kconfig file

[PATCH 4/4 ] SCSI: Remove the AER section in kconfig file

[Nick Cheng]

[-- Attachment #1: Type: text/plain, Size: 130 bytes --]

1. Remove the AER section of Areca driver in kconfig file of scsi folder
Signed-off-by: Nick Cheng< nick.cheng@areca.com.tw >
---

[-- Attachment #2: patch4-4 --]
[-- Type: application/octet-stream, Size: 1743 bytes --]

--- linux-2.6/drivers/scsi/Kconfig	2010-02-25 02:52:17.000000000 +0800
+++ linux-2.6/drivers/scsi/Kconfig.new	2010-05-05 10:55:26.000000000 +0800
@@ -579,32 +579,18 @@ config SCSI_IN2000
 	  module will be called in2000.
 
 config SCSI_ARCMSR
-	tristate "ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter"
+	tristate "ARECA (ARC11xx/12xx/13xx/16xx/18XX) SATA/SAS RAID Host Adapter"
 	depends on PCI && SCSI
 	help
 	  This driver supports all of ARECA's SATA/SAS RAID controller cards.
-	  This is an ARECA-maintained driver by Erich Chen.
-	  If you have any problems, please mail to: <erich@areca.com.tw>.
+	  This is an ARECA-maintained driver by Nick Cheng.
+	  If you have any problems, please mail to: <nick.cheng@areca.com.tw>.
 	  Areca supports Linux RAID config tools.
 	  Please link <http://www.areca.com.tw>
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called arcmsr (modprobe arcmsr).
 
-config SCSI_ARCMSR_AER
-	bool "Enable PCI Error Recovery Capability in Areca Driver(ARCMSR)"
-	depends on SCSI_ARCMSR && PCIEAER
-	default n
-	help
-	  The advanced error reporting(AER) capability is "NOT" provided by
-	  ARC1200/1201/1202 SATA RAID controllers cards.
-	  If your card is one of ARC1200/1201/1202, please use the default setting, n.
-	  If your card is other models, you could pick it
-	  on condition that the kernel version is greater than 2.6.19.
-	  This function is maintained driver by Nick Cheng. If you have any
-	  problems or suggestion, you are welcome to contact with <nick.cheng@areca.com.tw>.
-	  To enable this function, choose Y here.
-
 source "drivers/scsi/megaraid/Kconfig.megaraid"
 source "drivers/scsi/mpt2sas/Kconfig"
 

[PATCH 4/4 ] SCSI: Remove the AER section in kconfig file

[Nick Cheng]

[-- Attachment #1: Type: text/plain, Size: 130 bytes --]

1. Remove the AER section of Areca driver in kconfig file of scsi folder
Signed-off-by: Nick Cheng< nick.cheng@areca.com.tw >
---

[-- Attachment #2: patch_kconfig --]
[-- Type: application/octet-stream, Size: 1743 bytes --]

--- linux-2.6/drivers/scsi/Kconfig	2010-02-25 02:52:17.000000000 +0800
+++ linux-2.6/drivers/scsi/Kconfig.new	2010-05-05 10:55:26.000000000 +0800
@@ -579,32 +579,18 @@ config SCSI_IN2000
 	  module will be called in2000.
 
 config SCSI_ARCMSR
-	tristate "ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter"
+	tristate "ARECA (ARC11xx/12xx/13xx/16xx/18XX) SATA/SAS RAID Host Adapter"
 	depends on PCI && SCSI
 	help
 	  This driver supports all of ARECA's SATA/SAS RAID controller cards.
-	  This is an ARECA-maintained driver by Erich Chen.
-	  If you have any problems, please mail to: <erich@areca.com.tw>.
+	  This is an ARECA-maintained driver by Nick Cheng.
+	  If you have any problems, please mail to: <nick.cheng@areca.com.tw>.
 	  Areca supports Linux RAID config tools.
 	  Please link <http://www.areca.com.tw>
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called arcmsr (modprobe arcmsr).
 
-config SCSI_ARCMSR_AER
-	bool "Enable PCI Error Recovery Capability in Areca Driver(ARCMSR)"
-	depends on SCSI_ARCMSR && PCIEAER
-	default n
-	help
-	  The advanced error reporting(AER) capability is "NOT" provided by
-	  ARC1200/1201/1202 SATA RAID controllers cards.
-	  If your card is one of ARC1200/1201/1202, please use the default setting, n.
-	  If your card is other models, you could pick it
-	  on condition that the kernel version is greater than 2.6.19.
-	  This function is maintained driver by Nick Cheng. If you have any
-	  problems or suggestion, you are welcome to contact with <nick.cheng@areca.com.tw>.
-	  To enable this function, choose Y here.
-
 source "drivers/scsi/megaraid/Kconfig.megaraid"
 source "drivers/scsi/mpt2sas/Kconfig"