Re: [PATCH v4 2/7] arm64: dts: imx8ulp-evk: added nxp secure enclave firmware

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 12/07/2023 14:12, Pankaj Gupta wrote:
> Added support for NXP secure enclave called EdgeLock Enclave
> firmware (se-fw) for imx8ulp-evk.
> 
> Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> index 3ddc0f3125b3..10ed31974a6f 100644
> --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> @@ -114,7 +114,7 @@ sosc: clock-sosc {
>  		#clock-cells = <0>;
>  	};
>  
> -	sram@2201f000 {
> +	sram0: sram@2201f000 {
>  		compatible = "mmio-sram";
>  		reg = <0x0 0x2201f000 0x0 0x1000>;
>  
> @@ -161,6 +161,16 @@ s4muap: mailbox@27020000 {
>  			#mbox-cells = <2>;
>  		};
>  
> +		ele_fw: se-fw {
> +			compatible = "fsl,imx-ele";
> +			mboxes = <&s4muap 0 0 &s4muap 1 0>;
> +			mbox-names = "tx", "rx";
> +			fsl,mu-did = <7>;
> +			fsl,mu-id = <2>;
> +			sram-pool = <&sram0>;

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).

> +			status = "okay";

It's by default.

Best regards,
Krzysztof