* [PATCH] serial: set correct baud_base for Oxford Semiconductor Ltd EXSYS EX-41092 Dual 16950 Serial adapter
@ 2008-09-18 12:31 Niels de Vos
0 siblings, 0 replies; only message in thread
From: Niels de Vos @ 2008-09-18 12:31 UTC (permalink / raw)
To: linux-serial; +Cc: linux-kernel
This card is only useable with other devices (not the same card) after doing
a setserial /dev/ttyS<n> baud_base 115200. This baud_base should
be default for this card.
This card was the last/only user of pbn_b0_2_1130000, therefore removed.
Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com>
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index c2f2393..f092cf9 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -1089,8 +1089,6 @@ enum pci_board_num_t {
pbn_b0_2_921600,
pbn_b0_4_921600,
- pbn_b0_2_1130000,
-
pbn_b0_4_1152000,
pbn_b0_2_1843200,
@@ -1245,13 +1243,6 @@ static struct pciserial_board pci_boards[]
__devinitdata = {
.uart_offset = 8,
},
- [pbn_b0_2_1130000] = {
- .flags = FL_BASE0,
- .num_ports = 2,
- .base_baud = 1130000,
- .uart_offset = 8,
- },
-
[pbn_b0_4_1152000] = {
.flags = FL_BASE0,
.num_ports = 4,
@@ -2292,7 +2283,7 @@ static struct pci_device_id serial_pci_tbl[] = {
*/
{ PCI_VENDOR_ID_OXSEMI, 0x950a,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_b0_2_1130000 },
+ pbn_b0_2_115200 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_115200 },
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2008-09-18 12:31 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-09-18 12:31 [PATCH] serial: set correct baud_base for Oxford Semiconductor Ltd EXSYS EX-41092 Dual 16950 Serial adapter Niels de Vos
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®