From: Eric Ren <zren@suse.com>
To: Geliang Tang <geliangtang@gmail.com>,
"Theodore Ts'o" <tytso@mit.edu>, Jan Kara <jack@suse.com>
Cc: linux-ext4@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] jbd2: add jbd2_journal_init() helper
Date: Sat, 3 Sep 2016 17:33:39 +0800 [thread overview]
Message-ID: <1b8c6456-dcf2-648d-2a29-6671fc519187@suse.com> (raw)
In-Reply-To: <4f138dd04ef1dd370642c24f4a801370cc12ca54.1472644753.git.geliangtang@gmail.com>
Hi Geliang,
On 08/31/2016 08:23 PM, Geliang Tang wrote:
> There are some repetitive code in jbd2_journal_init_dev() and
> jbd2_journal_init_inode(). So this patch extracts the common code into
> jbd2_journal_init() helper to simplify the code. And fix the coding
> style warnings reported by checkpatch.pl by the way.
journal_init_common() is already there for the same purpose, right?
Do we really need another helper?
Thanks,
Eric
>
> Signed-off-by: Geliang Tang <geliangtang@gmail.com>
> ---
> fs/jbd2/journal.c | 130 +++++++++++++++++++++++++++---------------------------
> 1 file changed, 66 insertions(+), 64 deletions(-)
>
> diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
> index 46261a6..c10f657 100644
> --- a/fs/jbd2/journal.c
> +++ b/fs/jbd2/journal.c
> @@ -1143,30 +1143,13 @@ static journal_t * journal_init_common (void)
> *
> */
>
> -/**
> - * journal_t * jbd2_journal_init_dev() - creates and initialises a journal structure
> - * @bdev: Block device on which to create the journal
> - * @fs_dev: Device which hold journalled filesystem for this journal.
> - * @start: Block nr Start of journal.
> - * @len: Length of the journal in blocks.
> - * @blocksize: blocksize of journalling device
> - *
> - * Returns: a newly created journal_t *
> - *
> - * jbd2_journal_init_dev creates a journal which maps a fixed contiguous
> - * range of blocks on an arbitrary block device.
> - *
> - */
> -journal_t * jbd2_journal_init_dev(struct block_device *bdev,
> - struct block_device *fs_dev,
> - unsigned long long start, int len, int blocksize)
> +static int jbd2_journal_init(journal_t *journal, struct block_device *bdev,
> + struct block_device *fs_dev, unsigned long long start,
> + int len, int blocksize, gfp_t gfp)
> {
> - journal_t *journal = journal_init_common();
> struct buffer_head *bh;
> int n;
> -
> - if (!journal)
> - return NULL;
> + int err = 0;
>
> /* journal descriptor can store up to n blocks -bzzz */
> journal->j_blocksize = blocksize;
> @@ -1183,94 +1166,113 @@ journal_t * jbd2_journal_init_dev(struct block_device *bdev,
> if (!journal->j_wbuf) {
> printk(KERN_ERR "%s: Can't allocate bhs for commit thread\n",
> __func__);
> + err = -ENOMEM;
> goto out_err;
> }
>
> - bh = __getblk(journal->j_dev, start, journal->j_blocksize);
> + bh = __getblk_gfp(journal->j_dev, start, journal->j_blocksize, gfp);
> if (!bh) {
> printk(KERN_ERR
> "%s: Cannot get buffer for journal superblock\n",
> __func__);
> + err = -EIO;
> goto out_err;
> }
> journal->j_sb_buffer = bh;
> journal->j_superblock = (journal_superblock_t *)bh->b_data;
>
> - return journal;
> + return 0;
> out_err:
> kfree(journal->j_wbuf);
> jbd2_stats_proc_exit(journal);
> + return err;
> +}
> +
> +/**
> + * journal_t *jbd2_journal_init_dev() - creates and initialises a journal
> + * structure.
> + * @bdev: Block device on which to create the journal
> + * @fs_dev: Device which hold journalled filesystem for this journal.
> + * @start: Block nr Start of journal.
> + * @len: Length of the journal in blocks.
> + * @blocksize: blocksize of journalling device
> + *
> + * Returns: a newly created journal_t *
> + *
> + * jbd2_journal_init_dev creates a journal which maps a fixed contiguous
> + * range of blocks on an arbitrary block device.
> + */
> +journal_t *jbd2_journal_init_dev(struct block_device *bdev,
> + struct block_device *fs_dev,
> + unsigned long long start, int len, int blocksize)
> +{
> + journal_t *journal = journal_init_common();
> + int err;
> +
> + if (!journal)
> + return NULL;
> +
> + err = jbd2_journal_init(journal, bdev, fs_dev, start, len,
> + blocksize, __GFP_MOVABLE);
> + if (err) {
> + pr_err("%s: journal init error\n",
> + __func__);
> + goto out_err;
> + }
> +
> + return journal;
> +
> +out_err:
> kfree(journal);
> return NULL;
> }
>
> /**
> - * journal_t * jbd2_journal_init_inode () - creates a journal which maps to a inode.
> - * @inode: An inode to create the journal in
> + * journal_t *jbd2_journal_init_inode() - creates a journal which maps to a
> + * inode.
> + * @inode: An inode to create the journal in
> + *
> + * Returns: a newly created journal_t *
> *
> * jbd2_journal_init_inode creates a journal which maps an on-disk inode as
> - * the journal. The inode must exist already, must support bmap() and
> - * must have all data blocks preallocated.
> + * the journal. The inode must exist already, must support bmap() and must
> + * have all data blocks preallocated.
> */
> -journal_t * jbd2_journal_init_inode (struct inode *inode)
> +journal_t *jbd2_journal_init_inode(struct inode *inode)
> {
> - struct buffer_head *bh;
> journal_t *journal = journal_init_common();
> - char *p;
> - int err;
> - int n;
> unsigned long long blocknr;
> + int err;
>
> if (!journal)
> return NULL;
>
> - journal->j_dev = journal->j_fs_dev = inode->i_sb->s_bdev;
> journal->j_inode = inode;
> - bdevname(journal->j_dev, journal->j_devname);
> - p = strreplace(journal->j_devname, '/', '!');
> - sprintf(p, "-%lu", journal->j_inode->i_ino);
> - jbd_debug(1,
> - "journal %p: inode %s/%ld, size %Ld, bits %d, blksize %ld\n",
> - journal, inode->i_sb->s_id, inode->i_ino,
> - (long long) inode->i_size,
> - inode->i_sb->s_blocksize_bits, inode->i_sb->s_blocksize);
> -
> - journal->j_maxlen = inode->i_size >> inode->i_sb->s_blocksize_bits;
> - journal->j_blocksize = inode->i_sb->s_blocksize;
> - jbd2_stats_proc_init(journal);
> -
> - /* journal descriptor can store up to n blocks -bzzz */
> - n = journal->j_blocksize / sizeof(journal_block_tag_t);
> - journal->j_wbufsize = n;
> - journal->j_wbuf = kmalloc(n * sizeof(struct buffer_head*), GFP_KERNEL);
> - if (!journal->j_wbuf) {
> - printk(KERN_ERR "%s: Can't allocate bhs for commit thread\n",
> - __func__);
> - goto out_err;
> - }
>
> err = jbd2_journal_bmap(journal, 0, &blocknr);
> /* If that failed, give up */
> if (err) {
> - printk(KERN_ERR "%s: Cannot locate journal superblock\n",
> + pr_err("%s: Cannot locate journal superblock\n",
> __func__);
> goto out_err;
> }
>
> - bh = getblk_unmovable(journal->j_dev, blocknr, journal->j_blocksize);
> - if (!bh) {
> - printk(KERN_ERR
> - "%s: Cannot get buffer for journal superblock\n",
> + err = jbd2_journal_init(journal, inode->i_sb->s_bdev,
> + inode->i_sb->s_bdev, blocknr,
> + inode->i_size >> inode->i_sb->s_blocksize_bits,
> + inode->i_sb->s_blocksize, 0);
> + if (err) {
> + pr_err("%s: journal init error\n",
> __func__);
> goto out_err;
> }
> - journal->j_sb_buffer = bh;
> - journal->j_superblock = (journal_superblock_t *)bh->b_data;
> +
> + sprintf(journal->j_devname, "%s-%lu",
> + journal->j_devname, journal->j_inode->i_ino);
>
> return journal;
> +
> out_err:
> - kfree(journal->j_wbuf);
> - jbd2_stats_proc_exit(journal);
> kfree(journal);
> return NULL;
> }
next prev parent reply other threads:[~2016-09-03 9:34 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-31 12:23 Geliang Tang
2016-09-03 9:33 ` Eric Ren [this message]
2016-09-06 15:15 ` Jan Kara
2016-09-07 12:41 ` [PATCH] " Geliang Tang
2016-09-07 12:41 ` [PATCH] jbd2: move more common code into journal_init_common() Geliang Tang
2016-09-07 13:16 ` Jan Kara
2016-09-15 16:03 ` Theodore Ts'o
2016-09-15 19:58 ` Theodore Ts'o
2016-09-18 2:39 ` Geliang Tang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1b8c6456-dcf2-648d-2a29-6671fc519187@suse.com \
--to=zren@suse.com \
--cc=geliangtang@gmail.com \
--cc=jack@suse.com \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®