Re: [PATCH net-next 2/4] dt-bindings: net: pse-pd: realtek,pse-mcu: add VMAIN supply

[Kory Maincent <kory.maincent@bootlin.com>]

On 11/3/26 23:03, Jonas Jelonek wrote:
> Describe the VMAIN supply at the MCU controller level. The rail feeds the
> PoE subsystem as a whole rather than an individual PI. Its regulator power
> budget defines the aggregate limit programmed into the MCU.
> 
> Require a finite regulator power budget dedicated to this MCU, representing
> the PoE power allocation of the system.

binding change should be send at the beginning of your series.

Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>

Thank you!

> Signed-off-by: Jonas Jelonek <jonas@jonasjelonek.de>
> ---
>   .../bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml          | 7 +++++++
>   1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml b/Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml
> index 526f8525bb4d..82288bb57b33 100644
> --- a/Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml
> +++ b/Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml
> @@ -92,6 +92,13 @@ properties:
>         asserted.
>       maxItems: 1
>   
> +  vmain-supply:
> +    description:
> +      Regulator representing the PoE power allocation of the 44-57V VMAIN
> +      supply. This MCU must be its only power-budget consumer. Its unclaimed
> +      power budget is used to configure the MCU global PoE power budget. The
> +      regulator must define a finite regulator-power-budget-milliwatt value.
> +
>   required:
>     - compatible
>   

-- 
Köry Maincent, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com