* [PATCH v10] media: qcom: Pass proper PAS ID to set_remote_state API
@ 2026-10-27 12:02 Sumit Garg
2026-10-27 12:04 ` Gourav Kumar
0 siblings, 1 reply; 2+ messages in thread
From: Sumit Garg @ 2026-10-27 12:02 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, bod
Cc: linux-arm-msm, devicetree, dri-devel, freedreno, linux-media,
netdev, linux-wireless, ath12k, linux-remoteproc, robh, krzk+dt,
conor+dt, robin.clark, sean, akhilpo, lumag, abhinav.kumar,
jesszhan0024, marijn.suijten, airlied, simona, vikash.garodia,
mchehab, elder, andrew+netdev, davem, kuba, pabeni, jjohnson,
mathieu.poirier, trilokkumar.soni, mukesh.ojha, pavan.kondeti,
jorge.ramirez, tonyh, vignesh.viswanathan, srinivas.kandagatla,
amirreza.zarrabi, jenswi, op-tee, apurupa, skare, linux-kernel,
gourav.kumar, Eric Dumazet, Sumit Garg, Konrad Dybcio
From: Sumit Garg <sumit.garg@oss.qualcomm.com>
As per testing the SCM backend just ignores it while OP-TEE makes
use of it to for proper book keeping purpose.
Reviewed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Tested-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> # Lemans
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
---
Changes in v10:
- Resent standalone, as all the earlier patches of the series are merged.
- Link to v9: https://lore.kernel.org/all/20260702115835.167602-11-sumit.garg@kernel.org/
---
drivers/media/platform/qcom/iris/iris_firmware.c | 2 +-
drivers/media/platform/qcom/venus/firmware.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/qcom/iris/iris_firmware.c b/drivers/media/platform/qcom/iris/iris_firmware.c
index 21f57d37da18..ed2bd0e83797 100644
--- a/drivers/media/platform/qcom/iris/iris_firmware.c
+++ b/drivers/media/platform/qcom/iris/iris_firmware.c
@@ -262,5 +262,5 @@ int iris_fw_unload(struct iris_core *core)
int iris_set_hw_state(struct iris_core *core, bool resume)
{
- return qcom_pas_set_remote_state(resume, 0);
+ return qcom_pas_set_remote_state(resume, IRIS_PAS_ID);
}
diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c
index 3a38ff985822..3c0727ea137d 100644
--- a/drivers/media/platform/qcom/venus/firmware.c
+++ b/drivers/media/platform/qcom/venus/firmware.c
@@ -59,7 +59,7 @@ int venus_set_hw_state(struct venus_core *core, bool resume)
int ret;
if (core->use_tz) {
- ret = qcom_pas_set_remote_state(resume, 0);
+ ret = qcom_pas_set_remote_state(resume, VENUS_PAS_ID);
if (resume && ret == -EINVAL)
ret = 0;
return ret;
---
base-commit: d135ab453a7400a34930bdda1ef4bdc8acfac80e
change-id: 20261027-pas-id-media-7cc70fc5716f
Best regards,
--
Sumit Garg <sumit.garg@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH v10] media: qcom: Pass proper PAS ID to set_remote_state API
2026-10-27 12:02 [PATCH v10] media: qcom: Pass proper PAS ID to set_remote_state API Sumit Garg
@ 2026-10-27 12:04 ` Gourav Kumar
0 siblings, 0 replies; 2+ messages in thread
From: Gourav Kumar @ 2026-10-27 12:04 UTC (permalink / raw)
To: Sumit Garg, Bjorn Andersson, Konrad Dybcio, bod
Cc: linux-arm-msm, devicetree, dri-devel, freedreno, linux-media,
netdev, linux-wireless, ath12k, linux-remoteproc, robh, krzk+dt,
conor+dt, robin.clark, sean, akhilpo, lumag, abhinav.kumar,
jesszhan0024, marijn.suijten, airlied, simona, vikash.garodia,
mchehab, elder, andrew+netdev, davem, kuba, pabeni, jjohnson,
mathieu.poirier, trilokkumar.soni, mukesh.ojha, pavan.kondeti,
jorge.ramirez, tonyh, vignesh.viswanathan, srinivas.kandagatla,
amirreza.zarrabi, jenswi, op-tee, apurupa, skare, linux-kernel,
Eric Dumazet, Sumit Garg, Konrad Dybcio
On 10/27/2026 5:32 PM, Sumit Garg wrote:
> From: Sumit Garg <sumit.garg@oss.qualcomm.com>
>
> As per testing the SCM backend just ignores it while OP-TEE makes
> use of it to for proper book keeping purpose.
>
> Reviewed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
> Tested-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com> # Lemans
> Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
> ---
> Changes in v10:
> - Resent standalone, as all the earlier patches of the series are merged.
> - Link to v9: https://lore.kernel.org/all/20260702115835.167602-11-sumit.garg@kernel.org/
> ---
> drivers/media/platform/qcom/iris/iris_firmware.c | 2 +-
> drivers/media/platform/qcom/venus/firmware.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/platform/qcom/iris/iris_firmware.c b/drivers/media/platform/qcom/iris/iris_firmware.c
> index 21f57d37da18..ed2bd0e83797 100644
> --- a/drivers/media/platform/qcom/iris/iris_firmware.c
> +++ b/drivers/media/platform/qcom/iris/iris_firmware.c
> @@ -262,5 +262,5 @@ int iris_fw_unload(struct iris_core *core)
>
> int iris_set_hw_state(struct iris_core *core, bool resume)
> {
> - return qcom_pas_set_remote_state(resume, 0);
> + return qcom_pas_set_remote_state(resume, IRIS_PAS_ID);
> }
> diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c
> index 3a38ff985822..3c0727ea137d 100644
> --- a/drivers/media/platform/qcom/venus/firmware.c
> +++ b/drivers/media/platform/qcom/venus/firmware.c
> @@ -59,7 +59,7 @@ int venus_set_hw_state(struct venus_core *core, bool resume)
> int ret;
>
> if (core->use_tz) {
> - ret = qcom_pas_set_remote_state(resume, 0);
> + ret = qcom_pas_set_remote_state(resume, VENUS_PAS_ID);
> if (resume && ret == -EINVAL)
> ret = 0;
> return ret;
>
> ---
> base-commit: d135ab453a7400a34930bdda1ef4bdc8acfac80e
> change-id: 20261027-pas-id-media-7cc70fc5716f
>
> Best regards,
Reviewed-by: Gourav Kumar <gourav.kumar@oss.qualcomm.com>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-10-27 12:05 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-10-27 12:02 [PATCH v10] media: qcom: Pass proper PAS ID to set_remote_state API Sumit Garg
2026-10-27 12:04 ` Gourav Kumar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®