From: duoming@zju.edu.cn
To: "Krzysztof Kozlowski" <krzysztof.kozlowski@linaro.org>
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
broonie@kernel.org, akpm@linux-foundation.org,
alexander.deucher@amd.com, gregkh@linuxfoundation.org,
davem@davemloft.net, linma@zju.edu.cn
Subject: Re: Re: [PATCH] drivers: nfc: nfcmrvl: reorder destructive operations in nfcmrvl_nci_unregister_dev to avoid bugs
Date: Mon, 25 Apr 2022 17:09:34 +0800 (GMT+08:00) [thread overview]
Message-ID: <1ce1ec63.1b911.1805ffbb915.Coremail.duoming@zju.edu.cn> (raw)
In-Reply-To: <d7aefec5-a51d-00ba-10d6-79c90fbc8eb4@linaro.org>
Hello,
On Mon, 25 Apr 2022 09:59:32 +0200 Krzysztof wrote:
> > There are destructive operations such as nfcmrvl_fw_dnld_abort and
> > gpio_free in nfcmrvl_nci_unregister_dev. The resources such as firmware,
> > gpio and so on could be destructed while the upper layer functions such as
> > nfcmrvl_fw_dnld_start and nfcmrvl_nci_recv_frame is executing, which leads
> > to double-free, use-after-free and null-ptr-deref bugs.
>
> You need to correct the subject prefix because it does not describe the
> subsystem (git log oneline --).
I will change the subject prefix to "nfc: nfcmrvl: uart: ".
> >
> > There are three situations that could lead to double-free bugs.
> >
> > The first situation is shown below:
> >
> > (Thread 1) | (Thread 2)
> > nfcmrvl_fw_dnld_start |
> > ... | nfcmrvl_nci_unregister_dev
> > release_firmware() | nfcmrvl_fw_dnld_abort
> > kfree(fw) //(1) | fw_dnld_over
> > | release_firmware
> > ... | kfree(fw) //(2)
> > | ...
> >
> > The second situation is shown below:
> >
> > (Thread 1) | (Thread 2)
> > nfcmrvl_fw_dnld_start |
> > ... |
> > mod_timer |
> > (wait a time) |
> > fw_dnld_timeout | nfcmrvl_nci_unregister_dev
> > fw_dnld_over | nfcmrvl_fw_dnld_abort
> > release_firmware | fw_dnld_over
> > kfree(fw) //(1) | release_firmware
> > ... | kfree(fw) //(2)
> >
> > The third situation is shown below:
> >
> > (Thread 1) | (Thread 2)
> > nfcmrvl_nci_recv_frame |
> > if(..->fw_download_in_progress)|
> > nfcmrvl_fw_dnld_recv_frame |
> > queue_work |
> > |
> > fw_dnld_rx_work | nfcmrvl_nci_unregister_dev
> > fw_dnld_over | nfcmrvl_fw_dnld_abort
> > release_firmware | fw_dnld_over
> > kfree(fw) //(1) | release_firmware
> > | kfree(fw) //(2)
> >
> > The firmware struct is deallocated in position (1) and deallocated
> > in position (2) again.
> >
> > The crash trace triggered by POC is like below:
> >
> > [ 122.640457] BUG: KASAN: double-free or invalid-free in fw_dnld_over+0x28/0xf0
> > [ 122.640457] Call Trace:
> > [ 122.640457] <TASK>
> > [ 122.640457] kfree+0xb0/0x330
> > [ 122.640457] fw_dnld_over+0x28/0xf0
> > [ 122.640457] nfcmrvl_nci_unregister_dev+0x61/0x70
> > [ 122.640457] nci_uart_tty_close+0x87/0xd0
> > [ 122.640457] tty_ldisc_kill+0x3e/0x80
> > [ 122.640457] tty_ldisc_hangup+0x1b2/0x2c0
> > [ 122.640457] __tty_hangup.part.0+0x316/0x520
> > [ 122.640457] tty_release+0x200/0x670
> > [ 122.640457] __fput+0x110/0x410
> > [ 122.640457] task_work_run+0x86/0xd0
> > [ 122.640457] exit_to_user_mode_prepare+0x1aa/0x1b0
> > [ 122.640457] syscall_exit_to_user_mode+0x19/0x50
> > [ 122.640457] do_syscall_64+0x48/0x90
> > [ 122.640457] entry_SYSCALL_64_after_hwframe+0x44/0xae
> > [ 122.640457] RIP: 0033:0x7f68433f6beb
> >
> > What's more, there are also use-after-free and null-ptr-deref bugs
> > in nfcmrvl_fw_dnld_start. If we deallocate firmware struct, gpio or
> > set null to the members of priv->fw_dnld in nfcmrvl_nci_unregister_dev,
> > then, we dereference firmware, gpio or the members of priv->fw_dnld in
> > nfcmrvl_fw_dnld_start, the UAF or NPD bugs will happen.
> >
> > This patch reorders destructive operations after nci_unregister_device
> > to avoid the double-free, UAF and NPD bugs, as nci_unregister_device
> > is well synchronized and won't return if there is a running routine.
> > This was mentioned in commit 3e3b5dfcd16a ("NFC: reorder the logic in
> > nfc_{un,}register_device").
> >
> > Fixes: 3194c6870158 ("NFC: nfcmrvl: add firmware download support")
> > Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
> > Reviewed-by: Lin Ma <linma@zju.edu.cn>
>
> It's the first submission, how this review appeared?
I will remove the review tag.
> On the other hand, you already sent something similar, so is it a v2? I
> am sorry but this is very confusing. Looks like
> https://lore.kernel.org/all/20220425005718.33639-1-duoming@zju.edu.cn/
> but there is no changelog and commit description is different.
I am sorry the above link is just a test, I forget to remove "Cc: stable@vger.kernel.org".
> Please read:
> https://elixir.bootlin.com/linux/v5.18-rc4/source/Documentation/process/submitting-patches.rst
>
I will send "[PATCH net V2] nfc: nfcmrvl: uart: reorder destructive operations in nfcmrvl_nci_unregister_dev to avoid bugs".
Best regards,
Duoming Zhou
prev parent reply other threads:[~2022-04-25 9:17 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-25 3:10 Duoming Zhou
2022-04-25 7:59 ` Krzysztof Kozlowski
2022-04-25 9:09 ` duoming [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1ce1ec63.1b911.1805ffbb915.Coremail.duoming@zju.edu.cn \
--to=duoming@zju.edu.cn \
--cc=akpm@linux-foundation.org \
--cc=alexander.deucher@amd.com \
--cc=broonie@kernel.org \
--cc=davem@davemloft.net \
--cc=gregkh@linuxfoundation.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linma@zju.edu.cn \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®