mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jose Abreu <Jose.Abreu@synopsys.com>
To: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Jose Abreu <Jose.Abreu@synopsys.com>,
	Carlos Palminha <CARLOS.PALMINHA@synopsys.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Hans Verkuil <hans.verkuil@cisco.com>,
	Sylwester Nawrocki <snawrocki@kernel.org>,
	devicetree@vger.kernel.org
Subject: [PATCH v7 3/6] dt-bindings: media: Document Synopsys Designware HDMI RX
Date: Fri,  7 Jul 2017 12:08:06 +0100	[thread overview]
Message-ID: <1d0479599d90d9e7eb1360237d3097373959cee0.1499425271.git.joabreu@synopsys.com> (raw)
In-Reply-To: <cover.1499425271.git.joabreu@synopsys.com>
In-Reply-To: <cover.1499425271.git.joabreu@synopsys.com>

Document the bindings for the Synopsys Designware HDMI RX.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Sylwester Nawrocki <snawrocki@kernel.org>
Cc: devicetree@vger.kernel.org

Changes from v6:
	- Document which properties are required/optional (Sylwester)
	- Drop compatible string for SoC (Sylwester)
	- Reword edid-phandle property (Sylwester)
	- Typo fixes (Sylwester)
Changes from v4:
	- Use "cfg" instead of "cfg-clk" (Rob)
	- Change node names (Rob)
Changes from v3:
	- Document the new DT bindings suggested by Sylwester
Changes from v2:
	- Document edid-phandle property
---
 .../devicetree/bindings/media/snps,dw-hdmi-rx.txt  | 74 ++++++++++++++++++++++
 1 file changed, 74 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt

diff --git a/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt
new file mode 100644
index 0000000..6c49aae
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt
@@ -0,0 +1,74 @@
+Synopsys DesignWare HDMI RX Decoder
+===================================
+
+This document defines device tree properties for the Synopsys DesignWare HDMI
+RX Decoder (DWC HDMI RX). It doesn't constitute a device tree binding
+specification by itself but is meant to be referenced by platform-specific
+device tree bindings.
+
+The properties bellow belong to the Synopsys DesignWare HDMI RX Decoder node.
+
+- compatible: Required property. Shall be "snps,dw-hdmi-rx".
+
+- reg: Required property. Memory mapped base address and length of the DWC
+HDMI RX registers.
+
+- interrupts: Required property. Reference to the DWC HDMI RX interrupt and
+HDMI 5V sense interrupt.
+
+- clocks: Required property. Phandle to the config clock block.
+
+- clock-names: Required property. Shall be "cfg".
+
+- edid-phandle: Optional proerty. phandle to the EDID handler block; if this
+property is not specified it is assumed that EDID is handled by device
+described by parent node of the HDMI RX node. You should not specify this
+property if your HDMI RX controller does not have CEC.
+
+- #address-cells: Required property. Shall be 1.
+
+- #size-cells: Required property. Shall be 0.
+
+You also have to create a subnode for the PHY device. PHY node properties are
+as follows.
+
+- compatible: Required property. Shall be "snps,dw-hdmi-phy-e405".
+
+- reg: Required property. Shall be JTAG address of the PHY.
+
+- clocks: Required property. Phandle for cfg clock.
+
+- clock-names: Required property. Shall be "cfg".
+
+A sample binding is now provided. The compatible string is for a SoC which has
+has a Synopsys DesignWare HDMI RX decoder inside.
+
+Example:
+
+dw_hdmi_soc: dw-hdmi-soc@0 {
+	compatible = "...";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	hdmi-rx@0 {
+		compatible = "snps,dw-hdmi-rx";
+		reg = <0x0 0x10000>;
+		interrupts = <1 2>;
+		edid-phandle = <&dw_hdmi_soc>;
+
+		clocks = <&dw_hdmi_refclk>;
+		clock-names = "cfg";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hdmi-phy@fc {
+			compatible = "snps,dw-hdmi-phy-e405";
+			reg = <0xfc>;
+
+			clocks = <&dw_hdmi_refclk>;
+			clock-names = "cfg";
+		};
+	};
+};
-- 
1.9.1

  parent reply	other threads:[~2017-07-07 11:08 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-07 11:08 [PATCH v7 0/6] Synopsys Designware HDMI Video Capture Controller + PHY Jose Abreu
2017-07-07 11:08 ` [PATCH v7 1/6] [media] cec.h: Add stub function for cec_register_cec_notifier() Jose Abreu
2017-07-07 11:08 ` [PATCH v7 2/6] [media] cec-notifier.h: Prevent build warnings using forward declaration Jose Abreu
2017-07-07 11:16   ` Hans Verkuil
2017-07-07 11:25     ` Jose Abreu
2017-07-07 11:08 ` Jose Abreu [this message]
2017-07-07 11:08 ` [PATCH v7 4/6] MAINTAINERS: Add entry for Synopsys Designware HDMI drivers Jose Abreu
2017-07-07 11:08 ` [PATCH v7 5/6] [media] platform: Add Synopsys Designware HDMI RX PHY e405 Driver Jose Abreu
2017-07-07 11:08 ` [PATCH v7 6/6] [media] platform: Add Synopsys Designware HDMI RX Controller Driver Jose Abreu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1d0479599d90d9e7eb1360237d3097373959cee0.1499425271.git.joabreu@synopsys.com \
    --to=jose.abreu@synopsys.com \
    --cc=CARLOS.PALMINHA@synopsys.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hans.verkuil@cisco.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mchehab@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=snawrocki@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®