From: Sid Boyce <sboyce@blueyonder.co.uk>
To: Bagas Sanjaya <bagasdotme@gmail.com>,
Randy Dunlap <rdunlap@infradead.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux ALSA <alsa-devel@alsa-project.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>
Subject: Re: Ryzen 9 7950x sound module does not not build
Date: Tue, 26 Sep 2023 15:58:22 +0100 [thread overview]
Message-ID: <1d0c5a6b-e82a-4b37-8f98-eaac0b8db8e7@blueyonder.co.uk> (raw)
In-Reply-To: <ZRLWIkyngsasQbQ7@debian.me>
On 26/09/2023 14:01, Bagas Sanjaya wrote:
> [also Cc'ing alsa ML and related maintainers]
>
> On Tue, Sep 26, 2023 at 01:23:13PM +0100, Sid Boyce wrote:
>> I've since rebooted and did a modprobe. No idea why it isn't automatically
>> loaded.
>>
>> #modinfo snd-rpl-pci-acp6x
>> filename: /usr/lib/modules/6.6.0-rc3-vanilla/kernel/sound/soc/amd/rpl/snd-rpl-pci-acp6x.ko.gz
>> license: GPL v2
>> description: AMD ACP RPL PCI driver
>> srcversion: 0F909BC61165681426ECEEB
>> alias: pci:v00001022d000015E2sv*sd*bc04sc80i00*
>> depends:
>> retpoline: Y
>> intree: Y
>> name: snd_rpl_pci_acp6x
>> vermagic: 6.6.0-rc3-vanilla SMP preempt mod_unload modversions
>>
>> # modprobe snd-rpl-pci-acp6x
>>
>> #lsmod|grep snd
>> snd_rpl_pci_acp6x 16384 0
>> snd_seq_dummy 12288 0
>> snd_hrtimer 12288 1
>> snd_seq 131072 7 snd_seq_dummy
>> snd_hda_codec_realtek 192512 1
>> snd_hda_codec_hdmi 94208 1
>> snd_hda_codec_generic 110592 1 snd_hda_codec_realtek
>> snd_hda_intel 65536 2
>> snd_usb_audio 458752 2
>> snd_intel_dspcfg 40960 1 snd_hda_intel
>> snd_intel_sdw_acpi 16384 1 snd_intel_dspcfg
>> snd_hda_codec 233472 4
>> snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
>>
>> snd_usbmidi_lib 49152 1 snd_usb_audio
>> snd_hda_core 147456 5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
>>
>> snd_ump 36864 1 snd_usb_audio
>> snd_rawmidi 57344 2 snd_usbmidi_lib,snd_ump
>> snd_seq_device 16384 3 snd_seq,snd_ump,snd_rawmidi
>> mc 94208 1 snd_usb_audio
>> snd_hwdep 20480 2 snd_usb_audio,snd_hda_codec
>> snd_pcm 225280 6
>> snd_hda_codec_hdmi,snd_hda_intel,snd_usb_audio,snd_hda_codec,snd_hda_core
>> snd_timer 53248 3 snd_seq,snd_hrtimer,snd_pcm
>> ledtrig_audio 12288 2 snd_hda_codec_generic,asus_wmi
>> snd 163840 23 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_usb_audio,snd_usbmidi_lib,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_ump,snd_pcm,snd_rawmidi
>>
>> soundcore 16384 1 snd
>> usbcore 446464 6
>> xhci_hcd,snd_usb_audio,usbhid,snd_usbmidi_lib,btusb,xhci_pci
>>
> Any errors on dmesg when loading snd-rpl-pci-acp6x module?
>
No errors, no mention of the module. Booted with the USB dongle removed.
kmix only lists Playback Devices: Family 17h/19h HD Audio Controller
Digital Stereo (IEC958).
Capture Devices: Family 17h/19h HD Audio Controller Analog Stereo.
With USB dongle plugged it uses it as the default.
#fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: lancelot 2618 F.... wireplumber
/dev/snd/controlC1: lancelot 2618 F.... wireplumber
/dev/snd/controlC2: lancelot 2618 F.... wireplumber
/dev/snd/pcmC0D0p: lancelot 2617 F...m pipewire
/dev/snd/seq: lancelot 2617 F.... pipewire
#dmesg -T |grep snd
[Tue Sep 26 15:30:12 2023] snd_hda_intel 0000:01:00.1: Disabling MSI
[Tue Sep 26 15:30:12 2023] snd_hda_intel 0000:01:00.1: Handle
vga_switcheroo audio client
[Tue Sep 26 15:30:12 2023] snd_hda_intel 0000:0b:00.6: enabling device
(0000 -> 0002)
[Tue Sep 26 15:30:12 2023] snd_hda_codec_realtek hdaudioC2D0: autoconfig
for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[Tue Sep 26 15:30:12 2023] snd_hda_codec_realtek hdaudioC2D0:
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[Tue Sep 26 15:30:12 2023] snd_hda_codec_realtek hdaudioC2D0:
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[Tue Sep 26 15:30:12 2023] snd_hda_codec_realtek hdaudioC2D0: mono:
mono_out=0x0
[Tue Sep 26 15:30:12 2023] snd_hda_codec_realtek hdaudioC2D0:
dig-out=0x11/0x0
[Tue Sep 26 15:30:12 2023] snd_hda_codec_realtek hdaudioC2D0: inputs:
[Tue Sep 26 15:30:12 2023] snd_hda_codec_realtek hdaudioC2D0: Front
Mic=0x19
[Tue Sep 26 15:30:12 2023] snd_hda_codec_realtek hdaudioC2D0: Rear
Mic=0x18
[Tue Sep 26 15:30:12 2023] snd_hda_codec_realtek hdaudioC2D0:
Line=0x1a
[Tue Sep 26 15:30:12 2023] snd_hda_intel 0000:01:00.1: bound
0000:01:00.0 (ops nv50_audio_component_bind_ops [nouveau])
I had to use modprobe:
#lsmod|grep snd_rpl_pci_acp6x
snd_rpl_pci_acp6x 16384 0
dmesg does not report it.
Regards
Sid.
--
Sid Boyce ... Hamradio License G3VBV, Keen licensed Private Pilot
Retired IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist
Microsoft Windows Free Zone - Linux used for all Computing Tasks
next prev parent reply other threads:[~2023-09-26 14:58 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-26 1:20 Sid Boyce
2023-09-26 1:48 ` Randy Dunlap
2023-09-26 12:23 ` Sid Boyce
2023-09-26 13:01 ` Bagas Sanjaya
2023-09-26 14:58 ` Sid Boyce [this message]
2023-09-26 19:17 ` Sid Boyce
2023-09-26 22:13 ` Randy Dunlap
2023-09-27 11:27 ` Sid Boyce
2023-09-27 15:40 ` Randy Dunlap
2023-09-27 16:23 ` Sid Boyce
2023-09-27 19:14 ` Sid Boyce
2023-10-02 9:43 ` Sid Boyce
2023-09-27 16:26 ` Jaroslav Kysela
2023-09-27 19:59 ` Sid Boyce
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1d0c5a6b-e82a-4b37-8f98-eaac0b8db8e7@blueyonder.co.uk \
--to=sboyce@blueyonder.co.uk \
--cc=alsa-devel@alsa-project.org \
--cc=bagasdotme@gmail.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=rdunlap@infradead.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®