From: Sid Boyce <sboyce@blueyonder.co.uk>
To: Randy Dunlap <rdunlap@infradead.org>,
Bagas Sanjaya <bagasdotme@gmail.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux ALSA <alsa-devel@alsa-project.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>
Subject: Re: Ryzen 9 7950x sound module does not not build
Date: Mon, 2 Oct 2023 10:43:33 +0100 [thread overview]
Message-ID: <970e0a2a-18ed-4add-8feb-134e97743b48@blueyonder.co.uk> (raw)
In-Reply-To: <7afa193e-6bf1-4792-89e1-ca72bc4588e9@infradead.org>
On 27/09/2023 16:40, Randy Dunlap wrote:
>
> On 9/27/23 04:27, Sid Boyce wrote:
>> On 26/09/2023 23:13, Randy Dunlap wrote:
> || The snd-rpl-pci-acp6x driver only supports
> || vendor=0x1022, device=0x15e2, and PCI revision=0x62.
>
>>> lspci -vv
>>
>> 01:00.1 Audiodevice: NVIDIA Corporation Device 10fa (rev a1)
>> Subsystem: NVIDIA Corporation Device 1f82
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Interrupt: pin B routed to IRQ 80
>> IOMMU group: 11
>> Region 0: Memory at fc080000 (32-bit, non-prefetchable) [size=16K]
>> Capabilities: [60] Power Management version 3
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>> Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
>> Address: 0000000000000000 Data: 0000
>> Capabilities: [78] Express (v2) Endpoint, MSI 00
>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
>> unlimited, L1 <64us
>> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+
>> FLReset- SlotPowerLimit 75W
>> DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
>> RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
>> MaxPayload 256 bytes, MaxReadReq 512 bytes
>> DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+
>> AuxPwr- TransPend-
>> LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1,
>> Exit Latency L0s <512ns, L1 <4us
>> ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
>> LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled-
>> CommClk+
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 2.5GT/s (downgraded), Width x16
>> TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>> DevCap2: Completion Timeout: Range AB, TimeoutDis+
>> NROPrPrP- LTR+
>> 10BitTagComp- 10BitTagReq- OBFF Via message,
>> ExtFmt- EETLPPrefix-
>> EmergencyPowerReduction Not Supported,
>> EmergencyPowerReductionInit-
>> FRS- TPHComp- ExtTPHComp-
>> AtomicOpsCap: 32bit- 64bit- 128bitCAS-
>> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>> LTR- 10BitTagReq- OBFF Disabled,
>> AtomicOpsCtl: ReqEn-
>> LnkSta2: Current De-emphasis Level: -3.5dB,
>> EqualizationComplete- EqualizationPhase1-
>> EqualizationPhase2- EqualizationPhase3-
>> LinkEqualizationRequest-
>> Retimer- 2Retimers- CrosslinkRes: unsupported
>> Capabilities: [100 v2] Advanced Error Reporting
>> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
>> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
>> UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
>> UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
>> AdvNonFatalErr-
>> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
>> AdvNonFatalErr+
>> AERCap: First Error Pointer: 00, ECRCGenCap-
>> ECRCGenEn- ECRCChkCap- ECRCChkEn-
>> MultHdrRecCap- MultHdrRecEn- TLPPfxPres-
>> HdrLogCap-
>> HeaderLog: 00000000 00000000 00000000 00000000
>> Kernel driver in use: snd_hda_intel
>> Kernel modules: snd_hda_intel
>>
>> 0b:00.6 Audiodevice: Advanced Micro Devices, Inc. [AMD] Family
>> 17h/19h HD AudioController
>> DeviceName: Realtek ALC897 Audio
>> Subsystem: ASUSTeK Computer Inc. Device 87fb
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx+
>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0, Cache Line Size: 64 bytes
>> Interrupt: pin C routed to IRQ 81
>> IOMMU group: 24
>> Region 0: Memory at fc500000 (32-bit, non-prefetchable) [size=32K]
>> Capabilities: [48] Vendor Specific Information: Len=08 <?>
>> Capabilities: [50] Power Management version 3
>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
>> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>> Capabilities: [64] Express (v2) Endpoint, MSI 00
>> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
>> <4us, L1 unlimited
>> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+
>> FLReset- SlotPowerLimit 0W
>> DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
>> RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
>> MaxPayload 256 bytes, MaxReadReq 512 bytes
>> DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq-
>> AuxPwr- TransPend-
>> LnkCap: Port #0, Speed 16GT/s, Width x16, ASPM L0s L1,
>> Exit Latency L0s <64ns, L1 <1us
>> ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
>> LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
>> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> LnkSta: Speed 16GT/s, Width x16
>> TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
>> NROPrPrP- LTR-
>> 10BitTagComp+ 10BitTagReq- OBFF Not
>> Supported, ExtFmt+ EETLPPrefix+, MaxEETLPPrefixes 1
>> EmergencyPowerReduction Not Supported,
>> EmergencyPowerReductionInit-
>> FRS- TPHComp- ExtTPHComp-
>> AtomicOpsCap: 32bit- 64bit- 128bitCAS-
>> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>> LTR- 10BitTagReq- OBFF Disabled,
>> AtomicOpsCtl: ReqEn-
>> LnkSta2: Current De-emphasis Level: -3.5dB,
>> EqualizationComplete- EqualizationPhase1-
>> EqualizationPhase2- EqualizationPhase3-
>> LinkEqualizationRequest-
>> Retimer- 2Retimers- CrosslinkRes: unsupported
>> Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>> Address: 00000000fee00000 Data: 0000
>> Capabilities: [100 v1] Vendor Specific Information: ID=0001
>> Rev=1 Len=010 <?>
>> Capabilities: [2a0 v1] Access Control Services
>> ACSCap: SrcValid- TransBlk- ReqRedir- CmpltRedir-
>> UpstreamFwd- EgressCtrl- DirectTrans-
>> ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir-
>> UpstreamFwd- EgressCtrl- DirectTrans-
>> Kernel driver in use: snd_hda_intel
>> Kernel modules: snd_hda_intel
>>
> Sid, do you have some reason to believe that one of these devices
> should use the
> snd-rpl-pci-acp6x driver? I don't see that either one of them is the
> correct
> vendor/device ID pair for that driver, but I would prefer that someone
> who is
> familiar with the driver & device jump in here...
>
Discovered this morning that there was a faulty plug to one of the
external speakers.
Playback Devices in kmix now show "Family 17h/19h HD Audio Controller
Analog Stereo" and I have audio working with pipewire.
Regards
Sid.
--
Sid Boyce ... Hamradio License G3VBV, Keen licensed Private Pilot
Retired IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist
Microsoft Windows Free Zone - Linux used for all Computing Tasks
next prev parent reply other threads:[~2023-10-02 9:43 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-26 1:20 Sid Boyce
2023-09-26 1:48 ` Randy Dunlap
2023-09-26 12:23 ` Sid Boyce
2023-09-26 13:01 ` Bagas Sanjaya
2023-09-26 14:58 ` Sid Boyce
2023-09-26 19:17 ` Sid Boyce
2023-09-26 22:13 ` Randy Dunlap
2023-09-27 11:27 ` Sid Boyce
2023-09-27 15:40 ` Randy Dunlap
2023-09-27 16:23 ` Sid Boyce
2023-09-27 19:14 ` Sid Boyce
2023-10-02 9:43 ` Sid Boyce [this message]
2023-09-27 16:26 ` Jaroslav Kysela
2023-09-27 19:59 ` Sid Boyce
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=970e0a2a-18ed-4add-8feb-134e97743b48@blueyonder.co.uk \
--to=sboyce@blueyonder.co.uk \
--cc=alsa-devel@alsa-project.org \
--cc=bagasdotme@gmail.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=rdunlap@infradead.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®