* [PATCH v2 0/2] Enable tertiary USB controller in OTG mode
@ 2026-02-10 12:53 Swati Agarwal
2026-02-10 12:53 ` [PATCH v2 1/2] arm64: dts: qcom: lemans-evk: Enable GPIO expander interrupt for Lemans EVK Swati Agarwal
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Swati Agarwal @ 2026-02-10 12:53 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Swati Agarwal
Enable tertiary USB controller in OTG mode on lemans EVK platform.
Changes in v2:
Added interrupsts for all expanders.
Minor formatting changes.
Link to v1:
https://lore.kernel.org/all/20260206104642.1038381-1-swati.agarwal@oss.qualcomm.com/
This patch depends on:
https://lore.kernel.org/all/20260122092852.887624-1-swati.agarwal@oss.qualcomm.com/
Swati Agarwal (2):
arm64: dts: qcom: lemans-evk: Enable GPIO expander interrupt for
Lemans EVK
arm64: dts: qcom: lemans-evk: Enable the tertiary USB controller
arch/arm64/boot/dts/qcom/lemans-evk.dts | 96 +++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/lemans.dtsi | 7 ++
2 files changed, 103 insertions(+)
--
2.34.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2 1/2] arm64: dts: qcom: lemans-evk: Enable GPIO expander interrupt for Lemans EVK
2026-02-10 12:53 [PATCH v2 0/2] Enable tertiary USB controller in OTG mode Swati Agarwal
@ 2026-02-10 12:53 ` Swati Agarwal
2026-02-11 2:02 ` Dmitry Baryshkov
2026-02-12 12:15 ` Konrad Dybcio
2026-02-10 12:53 ` [PATCH v2 2/2] arm64: dts: qcom: lemans-evk: Enable the tertiary USB controller Swati Agarwal
2026-02-12 13:24 ` [PATCH v2 0/2] Enable tertiary USB controller in OTG mode Bjorn Andersson
2 siblings, 2 replies; 9+ messages in thread
From: Swati Agarwal @ 2026-02-10 12:53 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Swati Agarwal
Enable PCA9538 expander as interrupt controller on Lemans EVK and configure
the corresponding TLMM pins via pinctrl to operate as GPIO inputs with
internal pull-ups.
Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/lemans-evk.dts | 44 +++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
index a549f7fe53a1..265bdad10ae4 100644
--- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -628,6 +628,11 @@ expander0: gpio@38 {
reg = <0x38>;
#gpio-cells = <2>;
gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts-extended = <&tlmm 138 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&expander0_int>;
+ pinctrl-names = "default";
};
expander1: gpio@39 {
@@ -635,6 +640,11 @@ expander1: gpio@39 {
reg = <0x39>;
#gpio-cells = <2>;
gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts-extended = <&tlmm 19 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&expander1_int>;
+ pinctrl-names = "default";
};
expander2: gpio@3a {
@@ -642,6 +652,11 @@ expander2: gpio@3a {
reg = <0x3a>;
#gpio-cells = <2>;
gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts-extended = <&tlmm 139 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&expander2_int>;
+ pinctrl-names = "default";
};
expander3: gpio@3b {
@@ -649,6 +664,11 @@ expander3: gpio@3b {
reg = <0x3b>;
#gpio-cells = <2>;
gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&expander3_int>;
+ pinctrl-names = "default";
};
eeprom@50 {
@@ -894,6 +914,30 @@ ethernet0_mdio: ethernet0-mdio-pins {
};
};
+ expander0_int: expander0-int-state {
+ pins = "gpio138";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ expander1_int: expander1-int-state {
+ pins = "gpio19";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ expander2_int: expander2-int-state {
+ pins = "gpio139";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ expander3_int: expander3-int-state {
+ pins = "gpio39";
+ function = "gpio";
+ bias-pull-up;
+ };
+
pcie0_default_state: pcie0-default-state {
clkreq-pins {
pins = "gpio1";
--
2.34.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v2 2/2] arm64: dts: qcom: lemans-evk: Enable the tertiary USB controller
2026-02-10 12:53 [PATCH v2 0/2] Enable tertiary USB controller in OTG mode Swati Agarwal
2026-02-10 12:53 ` [PATCH v2 1/2] arm64: dts: qcom: lemans-evk: Enable GPIO expander interrupt for Lemans EVK Swati Agarwal
@ 2026-02-10 12:53 ` Swati Agarwal
2026-02-11 2:03 ` Dmitry Baryshkov
` (2 more replies)
2026-02-12 13:24 ` [PATCH v2 0/2] Enable tertiary USB controller in OTG mode Bjorn Andersson
2 siblings, 3 replies; 9+ messages in thread
From: Swati Agarwal @ 2026-02-10 12:53 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Swati Agarwal
Enable the tertiary usb controller connected to micro usb port in OTG mode
on Lemans EVK platform.
Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/lemans-evk.dts | 52 +++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/lemans.dtsi | 7 ++++
2 files changed, 59 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
index 265bdad10ae4..6f8b0d067256 100644
--- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -107,6 +107,25 @@ usb1_ss_in: endpoint {
};
};
+ connector-2 {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ label = "micro-USB";
+ type = "micro";
+
+ id-gpios = <&pmm8654au_2_gpios 11 GPIO_ACTIVE_HIGH>;
+ vbus-gpios = <&expander3 3 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&vbus_supply_regulator_2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_id>;
+
+ port {
+ usb2_con_hs_ep: endpoint {
+ remote-endpoint = <&usb_2_dwc3_hs>;
+ };
+ };
+ };
+
edp0-connector {
compatible = "dp-connector";
label = "EDP0";
@@ -190,6 +209,15 @@ vbus_supply_regulator_1: regulator-vbus-supply-1 {
enable-active-high;
};
+ vbus_supply_regulator_2: vbus-supply-regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus_supply_2";
+ gpio = <&pmm8654au_1_gpios 9 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ };
+
vmmc_sdc: regulator-vmmc-sdc {
compatible = "regulator-fixed";
@@ -809,6 +837,14 @@ usb1_intr: usb1-intr-state {
bias-pull-up;
power-source = <0>;
};
+
+ usb2_id: usb2-id-state {
+ pins = "gpio11";
+ function = "normal";
+ input-enable;
+ bias-pull-up;
+ power-source = <0>;
+ };
};
&qup_i2c19_default {
@@ -1174,6 +1210,22 @@ &usb_1_qmpphy {
status = "okay";
};
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_dwc3_hs {
+ remote-endpoint = <&usb2_con_hs_ep>;
+};
+
+&usb_2_hsphy {
+ vdda-pll-supply = <&vreg_l7a>;
+ vdda18-supply = <&vreg_l6c>;
+ vdda33-supply = <&vreg_l9a>;
+
+ status = "okay";
+};
+
&xo_board_clk {
clock-frequency = <38400000>;
};
diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 808827b83553..d0e63336be6b 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -4270,7 +4270,14 @@ usb_2: usb@a400000 {
snps,dis-u1-entry-quirk;
snps,dis-u2-entry-quirk;
+ usb-role-switch;
+
status = "disabled";
+
+ port {
+ usb_2_dwc3_hs: endpoint {
+ };
+ };
};
tcsr_mutex: hwlock@1f40000 {
--
2.34.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 1/2] arm64: dts: qcom: lemans-evk: Enable GPIO expander interrupt for Lemans EVK
2026-02-10 12:53 ` [PATCH v2 1/2] arm64: dts: qcom: lemans-evk: Enable GPIO expander interrupt for Lemans EVK Swati Agarwal
@ 2026-02-11 2:02 ` Dmitry Baryshkov
2026-02-12 12:15 ` Konrad Dybcio
1 sibling, 0 replies; 9+ messages in thread
From: Dmitry Baryshkov @ 2026-02-11 2:02 UTC (permalink / raw)
To: Swati Agarwal
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel
On Tue, Feb 10, 2026 at 06:23:47PM +0530, Swati Agarwal wrote:
> Enable PCA9538 expander as interrupt controller on Lemans EVK and configure
> the corresponding TLMM pins via pinctrl to operate as GPIO inputs with
> internal pull-ups.
>
> Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
> ---
> arch/arm64/boot/dts/qcom/lemans-evk.dts | 44 +++++++++++++++++++++++++
> 1 file changed, 44 insertions(+)
>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: qcom: lemans-evk: Enable the tertiary USB controller
2026-02-10 12:53 ` [PATCH v2 2/2] arm64: dts: qcom: lemans-evk: Enable the tertiary USB controller Swati Agarwal
@ 2026-02-11 2:03 ` Dmitry Baryshkov
2026-02-12 12:18 ` Konrad Dybcio
2026-02-12 13:23 ` Bjorn Andersson
2 siblings, 0 replies; 9+ messages in thread
From: Dmitry Baryshkov @ 2026-02-11 2:03 UTC (permalink / raw)
To: Swati Agarwal
Cc: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree, linux-kernel
On Tue, Feb 10, 2026 at 06:23:48PM +0530, Swati Agarwal wrote:
> Enable the tertiary usb controller connected to micro usb port in OTG mode
> on Lemans EVK platform.
>
> Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
> ---
> arch/arm64/boot/dts/qcom/lemans-evk.dts | 52 +++++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/lemans.dtsi | 7 ++++
> 2 files changed, 59 insertions(+)
Two separate commits, please.
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 1/2] arm64: dts: qcom: lemans-evk: Enable GPIO expander interrupt for Lemans EVK
2026-02-10 12:53 ` [PATCH v2 1/2] arm64: dts: qcom: lemans-evk: Enable GPIO expander interrupt for Lemans EVK Swati Agarwal
2026-02-11 2:02 ` Dmitry Baryshkov
@ 2026-02-12 12:15 ` Konrad Dybcio
1 sibling, 0 replies; 9+ messages in thread
From: Konrad Dybcio @ 2026-02-12 12:15 UTC (permalink / raw)
To: Swati Agarwal, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel
On 2/10/26 1:53 PM, Swati Agarwal wrote:
> Enable PCA9538 expander as interrupt controller on Lemans EVK and configure
> the corresponding TLMM pins via pinctrl to operate as GPIO inputs with
> internal pull-ups.
>
> Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Konrad
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: qcom: lemans-evk: Enable the tertiary USB controller
2026-02-10 12:53 ` [PATCH v2 2/2] arm64: dts: qcom: lemans-evk: Enable the tertiary USB controller Swati Agarwal
2026-02-11 2:03 ` Dmitry Baryshkov
@ 2026-02-12 12:18 ` Konrad Dybcio
2026-02-12 13:23 ` Bjorn Andersson
2 siblings, 0 replies; 9+ messages in thread
From: Konrad Dybcio @ 2026-02-12 12:18 UTC (permalink / raw)
To: Swati Agarwal, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel
On 2/10/26 1:53 PM, Swati Agarwal wrote:
> Enable the tertiary usb controller connected to micro usb port in OTG mode
> on Lemans EVK platform.
>
> Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
> ---
[...]
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb2_id>;
property-n
property-names
in this order, please
Konrad
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 2/2] arm64: dts: qcom: lemans-evk: Enable the tertiary USB controller
2026-02-10 12:53 ` [PATCH v2 2/2] arm64: dts: qcom: lemans-evk: Enable the tertiary USB controller Swati Agarwal
2026-02-11 2:03 ` Dmitry Baryshkov
2026-02-12 12:18 ` Konrad Dybcio
@ 2026-02-12 13:23 ` Bjorn Andersson
2 siblings, 0 replies; 9+ messages in thread
From: Bjorn Andersson @ 2026-02-12 13:23 UTC (permalink / raw)
To: Swati Agarwal
Cc: Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
linux-arm-msm, devicetree, linux-kernel
On Tue, Feb 10, 2026 at 06:23:48PM +0530, Swati Agarwal wrote:
> Enable the tertiary usb controller connected to micro usb port in OTG mode
> on Lemans EVK platform.
>
> Signed-off-by: Swati Agarwal <swati.agarwal@oss.qualcomm.com>
> ---
> arch/arm64/boot/dts/qcom/lemans-evk.dts | 52 +++++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/lemans.dtsi | 7 ++++
> 2 files changed, 59 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
> index 265bdad10ae4..6f8b0d067256 100644
> --- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
> +++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
> @@ -107,6 +107,25 @@ usb1_ss_in: endpoint {
> };
> };
>
> + connector-2 {
> + compatible = "gpio-usb-b-connector", "usb-b-connector";
> + label = "micro-USB";
> + type = "micro";
> +
> + id-gpios = <&pmm8654au_2_gpios 11 GPIO_ACTIVE_HIGH>;
> + vbus-gpios = <&expander3 3 GPIO_ACTIVE_HIGH>;
> + vbus-supply = <&vbus_supply_regulator_2>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb2_id>;
> +
> + port {
> + usb2_con_hs_ep: endpoint {
> + remote-endpoint = <&usb_2_dwc3_hs>;
> + };
> + };
> + };
> +
> edp0-connector {
> compatible = "dp-connector";
> label = "EDP0";
> @@ -190,6 +209,15 @@ vbus_supply_regulator_1: regulator-vbus-supply-1 {
> enable-active-high;
> };
>
> + vbus_supply_regulator_2: vbus-supply-regulator-2 {
Please follow
https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-nodes
point 2. "Nodes without unit addresses shall be ordered
alpha-numerically by the node name."
You have regulator-vbus- above and regulator-vmmc- below, so this seems
to be the right place.
> + compatible = "regulator-fixed";
> + regulator-name = "vbus_supply_2";
Please confirm that this really is what this supply is named in the
schematics.
> + gpio = <&pmm8654au_1_gpios 9 GPIO_ACTIVE_HIGH>;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + enable-active-high;
> + };
> +
> vmmc_sdc: regulator-vmmc-sdc {
> compatible = "regulator-fixed";
>
> @@ -809,6 +837,14 @@ usb1_intr: usb1-intr-state {
> bias-pull-up;
> power-source = <0>;
> };
> +
> + usb2_id: usb2-id-state {
> + pins = "gpio11";
> + function = "normal";
> + input-enable;
> + bias-pull-up;
> + power-source = <0>;
> + };
> };
>
> &qup_i2c19_default {
> @@ -1174,6 +1210,22 @@ &usb_1_qmpphy {
> status = "okay";
> };
>
> +&usb_2 {
> + status = "okay";
> +};
> +
> +&usb_2_dwc3_hs {
> + remote-endpoint = <&usb2_con_hs_ep>;
> +};
> +
> +&usb_2_hsphy {
> + vdda-pll-supply = <&vreg_l7a>;
> + vdda18-supply = <&vreg_l6c>;
> + vdda33-supply = <&vreg_l9a>;
> +
> + status = "okay";
> +};
> +
> &xo_board_clk {
> clock-frequency = <38400000>;
> };
> diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
> index 808827b83553..d0e63336be6b 100644
> --- a/arch/arm64/boot/dts/qcom/lemans.dtsi
> +++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
> @@ -4270,7 +4270,14 @@ usb_2: usb@a400000 {
> snps,dis-u1-entry-quirk;
> snps,dis-u2-entry-quirk;
>
> + usb-role-switch;
This changes the behavior of two other boards, not only the EVK. So
please keep this in a separate commit.
Regards,
Bjorn
> +
> status = "disabled";
> +
> + port {
> + usb_2_dwc3_hs: endpoint {
> + };
> + };
> };
>
> tcsr_mutex: hwlock@1f40000 {
> --
> 2.34.1
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v2 0/2] Enable tertiary USB controller in OTG mode
2026-02-10 12:53 [PATCH v2 0/2] Enable tertiary USB controller in OTG mode Swati Agarwal
2026-02-10 12:53 ` [PATCH v2 1/2] arm64: dts: qcom: lemans-evk: Enable GPIO expander interrupt for Lemans EVK Swati Agarwal
2026-02-10 12:53 ` [PATCH v2 2/2] arm64: dts: qcom: lemans-evk: Enable the tertiary USB controller Swati Agarwal
@ 2026-02-12 13:24 ` Bjorn Andersson
2 siblings, 0 replies; 9+ messages in thread
From: Bjorn Andersson @ 2026-02-12 13:24 UTC (permalink / raw)
To: Swati Agarwal
Cc: Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
linux-arm-msm, devicetree, linux-kernel
On Tue, Feb 10, 2026 at 06:23:46PM +0530, Swati Agarwal wrote:
> Enable tertiary USB controller in OTG mode on lemans EVK platform.
>
> Changes in v2:
> Added interrupsts for all expanders.
> Minor formatting changes.
>
> Link to v1:
> https://lore.kernel.org/all/20260206104642.1038381-1-swati.agarwal@oss.qualcomm.com/
>
> This patch depends on:
> https://lore.kernel.org/all/20260122092852.887624-1-swati.agarwal@oss.qualcomm.com/
You're the author of both series, there's no reason to have them active
at the same time. Group them together, or prioritize finishing the first
one.
Regards,
Bjorn
>
> Swati Agarwal (2):
> arm64: dts: qcom: lemans-evk: Enable GPIO expander interrupt for
> Lemans EVK
> arm64: dts: qcom: lemans-evk: Enable the tertiary USB controller
>
> arch/arm64/boot/dts/qcom/lemans-evk.dts | 96 +++++++++++++++++++++++++
> arch/arm64/boot/dts/qcom/lemans.dtsi | 7 ++
> 2 files changed, 103 insertions(+)
>
> --
> 2.34.1
>
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2026-02-12 13:24 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-02-10 12:53 [PATCH v2 0/2] Enable tertiary USB controller in OTG mode Swati Agarwal
2026-02-10 12:53 ` [PATCH v2 1/2] arm64: dts: qcom: lemans-evk: Enable GPIO expander interrupt for Lemans EVK Swati Agarwal
2026-02-11 2:02 ` Dmitry Baryshkov
2026-02-12 12:15 ` Konrad Dybcio
2026-02-10 12:53 ` [PATCH v2 2/2] arm64: dts: qcom: lemans-evk: Enable the tertiary USB controller Swati Agarwal
2026-02-11 2:03 ` Dmitry Baryshkov
2026-02-12 12:18 ` Konrad Dybcio
2026-02-12 13:23 ` Bjorn Andersson
2026-02-12 13:24 ` [PATCH v2 0/2] Enable tertiary USB controller in OTG mode Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®