mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] serial: qcom-geni: drop stray newline format specifier
@ 2026-03-19  9:48 Kathiravan Thirumoorthy
  2026-03-19 10:19 ` Konrad Dybcio
  0 siblings, 1 reply; 2+ messages in thread
From: Kathiravan Thirumoorthy @ 2026-03-19  9:48 UTC (permalink / raw)
  To: Greg Kroah-Hartman, Jiri Slaby
  Cc: linux-arm-msm, linux-kernel, linux-serial, Kathiravan Thirumoorthy

Drop the newline character from the middle of the printk message.
This avoids breaking the message into two lines unnecessarily.

Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
---
 drivers/tty/serial/qcom_geni_serial.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 9854bb2406e3fc830323ebbfdef1e471f00fa416..b365dd5da3cb799c4ec241724310c23d6bf7e16a 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1282,7 +1282,7 @@ static int geni_serial_set_rate(struct uart_port *uport, unsigned int baud)
 		return -EINVAL;
 	}
 
-	dev_dbg(port->se.dev, "desired_rate = %u, clk_rate = %lu, clk_div = %u\n, clk_idx = %u\n",
+	dev_dbg(port->se.dev, "desired_rate = %u, clk_rate = %lu, clk_div = %u, clk_idx = %u\n",
 		baud * sampling_rate, clk_rate, clk_div, clk_idx);
 
 	uport->uartclk = clk_rate;

---
base-commit: 8e42d2514a7e8eb8d740d0ba82339dd6c0b6463f
change-id: 20260319-drop_stray_n-ebd7ad277f9d

Best regards,
-- 
Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2026-03-19 10:19 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-03-19  9:48 [PATCH] serial: qcom-geni: drop stray newline format specifier Kathiravan Thirumoorthy
2026-03-19 10:19 ` Konrad Dybcio

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®