[PATCH v2 0/2] Add interconnect nodes and paths for MSM8953 SoC

mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed

* [PATCH v2 0/2] Add interconnect nodes and paths for MSM8953 SoC
@ 2025-04-20 15:12 Luca Weiss
  2025-04-20 15:12 ` [PATCH v2 1/2] dt-bindings: msm: qcom,mdss: Document interconnect paths Luca Weiss
                   ` (3 more replies)
  0 siblings, 4 replies; 8+ messages in thread
From: Luca Weiss @ 2025-04-20 15:12 UTC (permalink / raw)
  To: ~postmarketos/upstreaming, phone-devel, Rob Clark, Abhinav Kumar,
	Dmitry Baryshkov, Sean Paul, Marijn Suijten, David Airlie,
	Simona Vetter, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Bjorn Andersson, Konrad Dybcio, Vladimir Lypak
  Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
	Luca Weiss

Since the interconnect driver for msm8953 is already upstream, let's add
the nodes which are required for it to enable interconnect on MSM8953.

Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
---
Changes in v2:
- RPM_ACTIVE_TAG -> RPM_ALWAYS_TAG for mdss, gpu, usb3, sdhc_1, sdhc_2
  (Konrad)
- Reformat interconnect-names for usb3
- Add interconnect-names for sdhc_1 & sdhc_2
- Pick up tags
- Link to v1: https://lore.kernel.org/r/20250406-msm8953-interconnect-v1-0-a23e22e236e0@lucaweiss.eu

---
Luca Weiss (1):
      dt-bindings: msm: qcom,mdss: Document interconnect paths

Vladimir Lypak (1):
      arm64: dts: qcom: msm8953: Add interconnects

 .../devicetree/bindings/display/msm/qcom,mdss.yaml |  12 +++
 arch/arm64/boot/dts/qcom/msm8953.dtsi              | 101 +++++++++++++++++++++
 2 files changed, 113 insertions(+)
---
base-commit: 26afa38c4ec694e22596b653849e25a54da68eb3
change-id: 20250406-msm8953-interconnect-ef0109e8febb

Best regards,
-- 
Luca Weiss <luca@lucaweiss.eu>


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 1/2] dt-bindings: msm: qcom,mdss: Document interconnect paths
  2025-04-20 15:12 [PATCH v2 0/2] Add interconnect nodes and paths for MSM8953 SoC Luca Weiss
@ 2025-04-20 15:12 ` Luca Weiss
  2025-04-26  5:06   ` Dmitry Baryshkov
  2025-04-20 15:12 ` [PATCH v2 2/2] arm64: dts: qcom: msm8953: Add interconnects Luca Weiss
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 8+ messages in thread
From: Luca Weiss @ 2025-04-20 15:12 UTC (permalink / raw)
  To: ~postmarketos/upstreaming, phone-devel, Rob Clark, Abhinav Kumar,
	Dmitry Baryshkov, Sean Paul, Marijn Suijten, David Airlie,
	Simona Vetter, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Bjorn Andersson, Konrad Dybcio, Vladimir Lypak
  Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
	Luca Weiss

Document two interconnect paths found on the MDSS on MSM8953.

Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
---
There's also some interconnect paths defined in the mdp5 schema, both
drivers accept it. Newer mdss schemas seem to prefer mdp0-mem + cpu-cfg
in the mdss schema instead of in the dpu subnode. Since there's no
cpu-cfg defined with mdp5, I've added these paths here.
---
 Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
index 7c6462caa4428bc284619275e61ddacc26d0c06e..db9c43b20e2a705bcaae4a9e0e11ce13be853b78 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
@@ -84,6 +84,18 @@ properties:
     items:
       - description: MDSS_CORE reset
 
+  interconnects:
+    minItems: 1
+    items:
+      - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    minItems: 1
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
 required:
   - compatible
   - reg

-- 
2.49.0


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 1/2] dt-bindings: msm: qcom,mdss: Document interconnect paths
  2025-04-20 15:12 ` [PATCH v2 1/2] dt-bindings: msm: qcom,mdss: Document interconnect paths Luca Weiss
@ 2025-04-26  5:06   ` Dmitry Baryshkov
  0 siblings, 0 replies; 8+ messages in thread
From: Dmitry Baryshkov @ 2025-04-26  5:06 UTC (permalink / raw)
  To: Luca Weiss
  Cc: ~postmarketos/upstreaming, phone-devel, Rob Clark, Abhinav Kumar,
	Dmitry Baryshkov, Sean Paul, Marijn Suijten, David Airlie,
	Simona Vetter, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Bjorn Andersson, Konrad Dybcio, Vladimir Lypak,
	linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel

On Sun, Apr 20, 2025 at 05:12:43PM +0200, Luca Weiss wrote:
> Document two interconnect paths found on the MDSS on MSM8953.
> 
> Acked-by: Rob Herring (Arm) <robh@kernel.org>
> Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
> ---
> There's also some interconnect paths defined in the mdp5 schema, both
> drivers accept it. Newer mdss schemas seem to prefer mdp0-mem + cpu-cfg
> in the mdss schema instead of in the dpu subnode. Since there's no
> cpu-cfg defined with mdp5, I've added these paths here.
> ---
>  Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

-- 
With best wishes
Dmitry

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 2/2] arm64: dts: qcom: msm8953: Add interconnects
  2025-04-20 15:12 [PATCH v2 0/2] Add interconnect nodes and paths for MSM8953 SoC Luca Weiss
  2025-04-20 15:12 ` [PATCH v2 1/2] dt-bindings: msm: qcom,mdss: Document interconnect paths Luca Weiss
@ 2025-04-20 15:12 ` Luca Weiss
  2025-04-22 19:14   ` Konrad Dybcio
  2025-05-04 16:13 ` [PATCH v2 0/2] Add interconnect nodes and paths for MSM8953 SoC Dmitry Baryshkov
  2025-05-11 23:01 ` (subset) " Bjorn Andersson
  3 siblings, 1 reply; 8+ messages in thread
From: Luca Weiss @ 2025-04-20 15:12 UTC (permalink / raw)
  To: ~postmarketos/upstreaming, phone-devel, Rob Clark, Abhinav Kumar,
	Dmitry Baryshkov, Sean Paul, Marijn Suijten, David Airlie,
	Simona Vetter, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Bjorn Andersson, Konrad Dybcio, Vladimir Lypak
  Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel,
	Luca Weiss

From: Vladimir Lypak <vladimir.lypak@gmail.com>

Add the nodes for the bimc, pcnoc, snoc and snoc_mm. And wire up the
interconnects where applicable.

Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
[luca: Prepare patch for upstream submission]
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
---
 arch/arm64/boot/dts/qcom/msm8953.dtsi | 101 ++++++++++++++++++++++++++++++++++
 1 file changed, 101 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 6f5e6c407194d16682d1e6401fd4d10f3b73c195..155efb093ff863f2068ba4b2a7fbb5336174ef83 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -4,6 +4,8 @@
 #include <dt-bindings/clock/qcom,gcc-msm8953.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,msm8953.h>
+#include <dt-bindings/interconnect/qcom,rpm-icc.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,apr.h>
@@ -44,6 +46,8 @@ cpu0: cpu@0 {
 			reg = <0x0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
@@ -54,6 +58,8 @@ cpu1: cpu@1 {
 			reg = <0x1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
@@ -64,6 +70,8 @@ cpu2: cpu@2 {
 			reg = <0x2>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
@@ -74,6 +82,8 @@ cpu3: cpu@3 {
 			reg = <0x3>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_0>;
 			#cooling-cells = <2>;
 		};
@@ -84,6 +94,8 @@ cpu4: cpu@100 {
 			reg = <0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
@@ -94,6 +106,8 @@ cpu5: cpu@101 {
 			reg = <0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
@@ -104,6 +118,8 @@ cpu6: cpu@102 {
 			reg = <0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
@@ -114,6 +130,8 @@ cpu7: cpu@103 {
 			reg = <0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			interconnects = <&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &bimc SLV_EBI RPM_ACTIVE_TAG>;
 			next-level-cache = <&l2_1>;
 			#cooling-cells = <2>;
 		};
@@ -470,6 +488,13 @@ rng@e3000 {
 			clock-names = "core";
 		};
 
+		bimc: interconnect@400000 {
+			compatible = "qcom,msm8953-bimc";
+			reg = <0x00400000 0x5a000>;
+
+			#interconnect-cells = <2>;
+		};
+
 		tsens0: thermal-sensor@4a9000 {
 			compatible = "qcom,msm8953-tsens", "qcom,tsens-v2";
 			reg = <0x004a9000 0x1000>, /* TM */
@@ -486,6 +511,29 @@ restart@4ab000 {
 			reg = <0x004ab000 0x4>;
 		};
 
+		pcnoc: interconnect@500000 {
+			compatible = "qcom,msm8953-pcnoc";
+			reg = <0x00500000 0x12080>;
+
+			clocks = <&gcc GCC_PCNOC_USB3_AXI_CLK>;
+			clock-names = "pcnoc_usb3_axi";
+
+			#interconnect-cells = <2>;
+		};
+
+		snoc: interconnect@580000 {
+			compatible = "qcom,msm8953-snoc";
+			reg = <0x00580000 0x16080>;
+
+			#interconnect-cells = <2>;
+
+			snoc_mm: interconnect-snoc {
+				compatible = "qcom,msm8953-snoc-mm";
+
+				#interconnect-cells = <2>;
+			};
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,msm8953-pinctrl";
 			reg = <0x01000000 0x300000>;
@@ -849,6 +897,13 @@ mdss: display-subsystem@1a00000 {
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
+			interconnects = <&snoc_mm MAS_MDP RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_DISP_SS_CFG RPM_ACTIVE_TAG>;
+			interconnect-names = "mdp0-mem",
+					     "cpu-cfg";
+
 			clocks = <&gcc GCC_MDSS_AHB_CLK>,
 				 <&gcc GCC_MDSS_AXI_CLK>,
 				 <&gcc GCC_MDSS_VSYNC_CLK>,
@@ -1065,6 +1120,11 @@ gpu: gpu@1c00000 {
 				      "alwayson";
 			power-domains = <&gcc OXILI_GX_GDSC>;
 
+			interconnects = <&bimc MAS_OXILI RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_GPU_CFG RPM_ACTIVE_TAG>;
+
 			iommus = <&gpu_iommu 0>;
 			operating-points-v2 = <&gpu_opp_table>;
 
@@ -1302,6 +1362,13 @@ usb3: usb@70f8800 {
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <133330000>;
 
+			interconnects = <&pcnoc MAS_USB3 RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_USB3 RPM_ACTIVE_TAG>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
 			power-domains = <&gcc USB30_GDSC>;
 
 			qcom,select-utmi-as-pipe-clk;
@@ -1354,6 +1421,13 @@ sdhc_1: mmc@7824900 {
 				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 
+			interconnects = <&pcnoc MAS_SDCC_1 RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_SDCC_1 RPM_ACTIVE_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
 			power-domains = <&rpmpd MSM8953_VDDCX>;
 			operating-points-v2 = <&sdhc1_opp_table>;
 
@@ -1374,26 +1448,36 @@ sdhc1_opp_table: opp-table-sdhc1 {
 
 				opp-25000000 {
 					opp-hz = /bits/ 64 <25000000>;
+					opp-peak-kBps = <200000>, <100000>;
+					opp-avg-kBps = <65360>, <32768>;
 					required-opps = <&rpmpd_opp_low_svs>;
 				};
 
 				opp-50000000 {
 					opp-hz = /bits/ 64 <50000000>;
+					opp-peak-kBps = <400000>, <200000>;
+					opp-avg-kBps = <130718>, <65360>;
 					required-opps = <&rpmpd_opp_svs>;
 				};
 
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
+					opp-peak-kBps = <400000>, <400000>;
+					opp-avg-kBps = <130718>, <65360>;
 					required-opps = <&rpmpd_opp_svs>;
 				};
 
 				opp-192000000 {
 					opp-hz = /bits/ 64 <192000000>;
+					opp-peak-kBps = <800000>, <600000>;
+					opp-avg-kBps = <261438>, <130718>;
 					required-opps = <&rpmpd_opp_nom>;
 				};
 
 				opp-384000000 {
 					opp-hz = /bits/ 64 <384000000>;
+					opp-peak-kBps = <800000>, <800000>;
+					opp-avg-kBps = <261438>, <300000>;
 					required-opps = <&rpmpd_opp_nom>;
 				};
 			};
@@ -1414,6 +1498,13 @@ sdhc_2: mmc@7864900 {
 				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 
+			interconnects = <&pcnoc MAS_SDCC_2 RPM_ALWAYS_TAG
+					 &bimc SLV_EBI RPM_ALWAYS_TAG>,
+					<&bimc MAS_APPS_PROC RPM_ACTIVE_TAG
+					 &pcnoc SLV_SDCC_2 RPM_ACTIVE_TAG>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
 			power-domains = <&rpmpd MSM8953_VDDCX>;
 			operating-points-v2 = <&sdhc2_opp_table>;
 
@@ -1430,26 +1521,36 @@ sdhc2_opp_table: opp-table-sdhc2 {
 
 				opp-25000000 {
 					opp-hz = /bits/ 64 <25000000>;
+					opp-peak-kBps = <200000>, <100000>;
+					opp-avg-kBps = <65360>, <32768>;
 					required-opps = <&rpmpd_opp_low_svs>;
 				};
 
 				opp-50000000 {
 					opp-hz = /bits/ 64 <50000000>;
+					opp-peak-kBps = <400000>, <400000>;
+					opp-avg-kBps = <130718>, <65360>;
 					required-opps = <&rpmpd_opp_svs>;
 				};
 
 				opp-100000000 {
 					opp-hz = /bits/ 64 <100000000>;
+					opp-peak-kBps = <800000>, <400000>;
+					opp-avg-kBps = <130718>, <130718>;
 					required-opps = <&rpmpd_opp_svs>;
 				};
 
 				opp-177770000 {
 					opp-hz = /bits/ 64 <177770000>;
+					opp-peak-kBps = <600000>, <600000>;
+					opp-avg-kBps = <261438>, <130718>;
 					required-opps = <&rpmpd_opp_nom>;
 				};
 
 				opp-200000000 {
 					opp-hz = /bits/ 64 <200000000>;
+					opp-peak-kBps = <800000>, <800000>;
+					opp-avg-kBps = <261438>, <130718>;
 					required-opps = <&rpmpd_opp_nom>;
 				};
 			};

-- 
2.49.0


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 2/2] arm64: dts: qcom: msm8953: Add interconnects
  2025-04-20 15:12 ` [PATCH v2 2/2] arm64: dts: qcom: msm8953: Add interconnects Luca Weiss
@ 2025-04-22 19:14   ` Konrad Dybcio
  0 siblings, 0 replies; 8+ messages in thread
From: Konrad Dybcio @ 2025-04-22 19:14 UTC (permalink / raw)
  To: Luca Weiss, ~postmarketos/upstreaming, phone-devel, Rob Clark,
	Abhinav Kumar, Dmitry Baryshkov, Sean Paul, Marijn Suijten,
	David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Bjorn Andersson, Konrad Dybcio, Vladimir Lypak
  Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel

On 4/20/25 5:12 PM, Luca Weiss wrote:
> From: Vladimir Lypak <vladimir.lypak@gmail.com>
> 
> Add the nodes for the bimc, pcnoc, snoc and snoc_mm. And wire up the
> interconnects where applicable.
> 
> Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
> [luca: Prepare patch for upstream submission]
> Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 0/2] Add interconnect nodes and paths for MSM8953 SoC
  2025-04-20 15:12 [PATCH v2 0/2] Add interconnect nodes and paths for MSM8953 SoC Luca Weiss
  2025-04-20 15:12 ` [PATCH v2 1/2] dt-bindings: msm: qcom,mdss: Document interconnect paths Luca Weiss
  2025-04-20 15:12 ` [PATCH v2 2/2] arm64: dts: qcom: msm8953: Add interconnects Luca Weiss
@ 2025-05-04 16:13 ` Dmitry Baryshkov
  2025-05-19 10:58   ` Dmitry Baryshkov
  2025-05-11 23:01 ` (subset) " Bjorn Andersson
  3 siblings, 1 reply; 8+ messages in thread
From: Dmitry Baryshkov @ 2025-05-04 16:13 UTC (permalink / raw)
  To: ~postmarketos/upstreaming, phone-devel, Rob Clark, Abhinav Kumar,
	Dmitry Baryshkov, Sean Paul, Marijn Suijten, David Airlie,
	Simona Vetter, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Bjorn Andersson, Konrad Dybcio, Vladimir Lypak,
	Luca Weiss
  Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel


On Sun, 20 Apr 2025 17:12:42 +0200, Luca Weiss wrote:
> Since the interconnect driver for msm8953 is already upstream, let's add
> the nodes which are required for it to enable interconnect on MSM8953.
> 
> 

Applied, thanks!

[1/2] dt-bindings: msm: qcom,mdss: Document interconnect paths
      https://gitlab.freedesktop.org/lumag/msm/-/commit/6694d17843e8

Best regards,
-- 
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 0/2] Add interconnect nodes and paths for MSM8953 SoC
  2025-05-04 16:13 ` [PATCH v2 0/2] Add interconnect nodes and paths for MSM8953 SoC Dmitry Baryshkov
@ 2025-05-19 10:58   ` Dmitry Baryshkov
  0 siblings, 0 replies; 8+ messages in thread
From: Dmitry Baryshkov @ 2025-05-19 10:58 UTC (permalink / raw)
  To: ~postmarketos/upstreaming, phone-devel, Rob Clark, Abhinav Kumar,
	Dmitry Baryshkov, Sean Paul, Marijn Suijten, David Airlie,
	Simona Vetter, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Bjorn Andersson, Konrad Dybcio, Vladimir Lypak,
	Luca Weiss
  Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel


On Sun, 20 Apr 2025 17:12:42 +0200, Luca Weiss wrote:
> Since the interconnect driver for msm8953 is already upstream, let's add
> the nodes which are required for it to enable interconnect on MSM8953.
> 
> 

Applied, thanks!

[1/2] dt-bindings: msm: qcom,mdss: Document interconnect paths
      https://gitlab.freedesktop.org/lumag/msm/-/commit/6694d17843e8

Best regards,
-- 
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: (subset) [PATCH v2 0/2] Add interconnect nodes and paths for MSM8953 SoC
  2025-04-20 15:12 [PATCH v2 0/2] Add interconnect nodes and paths for MSM8953 SoC Luca Weiss
                   ` (2 preceding siblings ...)
  2025-05-04 16:13 ` [PATCH v2 0/2] Add interconnect nodes and paths for MSM8953 SoC Dmitry Baryshkov
@ 2025-05-11 23:01 ` Bjorn Andersson
  3 siblings, 0 replies; 8+ messages in thread
From: Bjorn Andersson @ 2025-05-11 23:01 UTC (permalink / raw)
  To: ~postmarketos/upstreaming, phone-devel, Rob Clark, Abhinav Kumar,
	Dmitry Baryshkov, Sean Paul, Marijn Suijten, David Airlie,
	Simona Vetter, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Konrad Dybcio, Vladimir Lypak, Luca Weiss
  Cc: linux-arm-msm, dri-devel, freedreno, devicetree, linux-kernel


On Sun, 20 Apr 2025 17:12:42 +0200, Luca Weiss wrote:
> Since the interconnect driver for msm8953 is already upstream, let's add
> the nodes which are required for it to enable interconnect on MSM8953.
> 
> 

Applied, thanks!

[2/2] arm64: dts: qcom: msm8953: Add interconnects
      commit: 6aeda4f2042711f99d63c5b7bf846c2bba711696

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2025-05-19 10:58 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-04-20 15:12 [PATCH v2 0/2] Add interconnect nodes and paths for MSM8953 SoC Luca Weiss
2025-04-20 15:12 ` [PATCH v2 1/2] dt-bindings: msm: qcom,mdss: Document interconnect paths Luca Weiss
2025-04-26  5:06   ` Dmitry Baryshkov
2025-04-20 15:12 ` [PATCH v2 2/2] arm64: dts: qcom: msm8953: Add interconnects Luca Weiss
2025-04-22 19:14   ` Konrad Dybcio
2025-05-04 16:13 ` [PATCH v2 0/2] Add interconnect nodes and paths for MSM8953 SoC Dmitry Baryshkov
2025-05-19 10:58   ` Dmitry Baryshkov
2025-05-11 23:01 ` (subset) " Bjorn Andersson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®