Re: [PATCH v2 2/2] mfd: axp20c-i2c: Select designware i2c-bus driver on x86

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 03-04-17 12:27, Lee Jones wrote:
> On Wed, 29 Mar 2017, Hans de Goede wrote:
>
>> On x86 the axp288 PMIC provides an ACPI OPRegion handler, which must be
>> available before other drivers using it are loaded, which can only be
>> ensured if the mfd, opregion driver and i2c-bus drivers are built in.
>>
>> The opregion driver is a bool depending on MFD_AXP20X_I2C ensuring that
>> it will be builtin if the opregion driver is to be enabled, add a
>> select for the designware-options to ensure those get built in too.
>>
>> This fixes errors like these during boot:
>>
>> mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
>> ACPI Error: No handler for Region [REGS] (ffff93543b0cc3a8) [UserDefinedRegion]
>> ACPI Error: Region UserDefinedRegion (ID=143) has no handler (20170119/exfldio-2
>> ACPI Error: Method parse/execution failed [\_SB.PCI0.I2C7.PMI5.GET] (Node ffff93
>> ACPI Error: Method parse/execution failed [\_SB.PCI0.SHC1._PS0] (Node ffff93543b
>> acpi 80860F14:02: Failed to change power state to D0
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>> Changes in v2:
>> -Fix Kconfig depends and selects to fix warning reported by kbuild test robot
>
> Looks like there is still an issue.

Yes I noticed the new kbuild test mails I will take a look at this
and do a v3 as time permits.

Regards,

Hans


>
>> -Improve commit msg (add example of ACPI errors this avoids)
>> ---
>>  drivers/mfd/Kconfig | 13 ++++++++++++-
>>  1 file changed, 12 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index 4eb044e..ed2616c 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -148,7 +148,14 @@ config MFD_AXP20X_I2C
>>  	tristate "X-Powers AXP series PMICs with I2C"
>>  	select MFD_AXP20X
>>  	select REGMAP_I2C
>> -	depends on I2C
>> +	# In order for the ACPI Opregion this provides on x86 to be available
>> +	# the i2c-adapter driver must be builtin too, select it and its deps
>> +	depends on X86=n || (ACPI && HAS_IOMEM)
>> +	select I2C
>> +	select IOSF_MBI if X86
>> +	select COMMON_CLK if X86
>> +	select I2C_DESIGNWARE_PLATFORM if X86
>> +	select I2C_DESIGNWARE_BAYTRAIL if X86
>>  	help
>>  	  If you say Y here you get support for the X-Powers AXP series power
>>  	  management ICs (PMICs) controlled with I2C.
>> @@ -156,6 +163,10 @@ config MFD_AXP20X_I2C
>>  	  components like regulators or the PEK (Power Enable Key) under the
>>  	  corresponding menus.
>>
>> +	  Note on x86 this provides an ACPI Opregion, so this must be 'y'
>> +	  (builtin) and not a module, as the OPregion must be available as
>> +	  soon as possible.
>> +
>>  config MFD_AXP20X_RSB
>>  	tristate "X-Powers AXP series PMICs with RSB"
>>  	select MFD_AXP20X
>