* [PATCH] ASoC: hdmi-codec: register hpd callback on component probe
@ 2023-11-06 10:40 Jerome Brunet
2023-11-06 13:03 ` Mark Brown
[not found] ` <CADYyEwTNyY+fR9SgfDa-g6iiDwkU3MUdPVCYexs2_3wbcM8_vg@mail.gmail.com>
0 siblings, 2 replies; 5+ messages in thread
From: Jerome Brunet @ 2023-11-06 10:40 UTC (permalink / raw)
To: Mark Brown; +Cc: Jerome Brunet, alsa-devel, linux-kernel
The HDMI hotplug callback to the hdmi-codec is currently registered when
jack is set.
The hotplug not only serves to report the ASoC jack state but also to get
the ELD. It should be registered when the component probes instead, so it
does not depend on the card driver registering a jack for the HDMI to
properly report the ELD.
Fixes: 25ce4f2b3593 ("ASoC: hdmi-codec: Get ELD in before reporting plugged event")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
sound/soc/codecs/hdmi-codec.c | 27 +++++++++++++++++++--------
1 file changed, 19 insertions(+), 8 deletions(-)
diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index 09eef6042aad..20da1eaa4f1c 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -877,18 +877,13 @@ static int hdmi_codec_set_jack(struct snd_soc_component *component,
void *data)
{
struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component);
- int ret = -ENOTSUPP;
if (hcp->hcd.ops->hook_plugged_cb) {
hcp->jack = jack;
- ret = hcp->hcd.ops->hook_plugged_cb(component->dev->parent,
- hcp->hcd.data,
- plugged_cb,
- component->dev);
- if (ret)
- hcp->jack = NULL;
+ return 0;
}
- return ret;
+
+ return -ENOTSUPP;
}
static int hdmi_dai_spdif_probe(struct snd_soc_dai *dai)
@@ -982,6 +977,21 @@ static int hdmi_of_xlate_dai_id(struct snd_soc_component *component,
return ret;
}
+static int hdmi_probe(struct snd_soc_component *component)
+{
+ struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component);
+ int ret = 0;
+
+ if (hcp->hcd.ops->hook_plugged_cb) {
+ ret = hcp->hcd.ops->hook_plugged_cb(component->dev->parent,
+ hcp->hcd.data,
+ plugged_cb,
+ component->dev);
+ }
+
+ return ret;
+}
+
static void hdmi_remove(struct snd_soc_component *component)
{
struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component);
@@ -992,6 +1002,7 @@ static void hdmi_remove(struct snd_soc_component *component)
}
static const struct snd_soc_component_driver hdmi_driver = {
+ .probe = hdmi_probe,
.remove = hdmi_remove,
.dapm_widgets = hdmi_widgets,
.num_dapm_widgets = ARRAY_SIZE(hdmi_widgets),
--
2.42.0
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] ASoC: hdmi-codec: register hpd callback on component probe 2023-11-06 10:40 [PATCH] ASoC: hdmi-codec: register hpd callback on component probe Jerome Brunet @ 2023-11-06 13:03 ` Mark Brown [not found] ` <CADYyEwTNyY+fR9SgfDa-g6iiDwkU3MUdPVCYexs2_3wbcM8_vg@mail.gmail.com> 1 sibling, 0 replies; 5+ messages in thread From: Mark Brown @ 2023-11-06 13:03 UTC (permalink / raw) To: Jerome Brunet; +Cc: alsa-devel, linux-kernel On Mon, 06 Nov 2023 11:40:11 +0100, Jerome Brunet wrote: > The HDMI hotplug callback to the hdmi-codec is currently registered when > jack is set. > > The hotplug not only serves to report the ASoC jack state but also to get > the ELD. It should be registered when the component probes instead, so it > does not depend on the card driver registering a jack for the HDMI to > properly report the ELD. > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next Thanks! [1/1] ASoC: hdmi-codec: register hpd callback on component probe commit: 15be353d55f9e12e34f9a819f51eb41fdef5eda8 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <CADYyEwTNyY+fR9SgfDa-g6iiDwkU3MUdPVCYexs2_3wbcM8_vg@mail.gmail.com>]
* Re: [PATCH] ASoC: hdmi-codec: register hpd callback on component probe [not found] ` <CADYyEwTNyY+fR9SgfDa-g6iiDwkU3MUdPVCYexs2_3wbcM8_vg@mail.gmail.com> @ 2023-12-15 7:57 ` Jerome Brunet 2023-12-15 22:55 ` Hsin-Yi Wang 0 siblings, 1 reply; 5+ messages in thread From: Jerome Brunet @ 2023-12-15 7:57 UTC (permalink / raw) To: Zhengqiao Xia Cc: Jerome Brunet, Mark Brown, alsa-devel, linux-kernel, Hsin-Yi Wang On Fri 15 Dec 2023 at 12:51, Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com> wrote: > Hi Jerome, > > After my testing, I found that this patch will cause the audio on the external display to not work properly after > restart. > You move the plugged_cb to run in hdmi_probe, at this time hcp- > jack = NULL, the driver cannot report `SND_JACK_LINEOUT > ` normally. > static void hdmi_codec_jack_report(struct hdmi_codec_priv *hcp, > unsigned int jack_status) > { > printk("xzq-866 hdmi_codec_jack_report: jack=%x, jack_status=%d", hcp->jack, jack_status != hcp->jack_status); > if (hcp->jack && jack_status != hcp->jack_status) { > snd_soc_jack_report(hcp->jack, jack_status, SND_JACK_LINEOUT); > hcp->jack_status = jack_status; > } > } > So we must call plugged_cb in hdmi_codec_set_jack, Can you make some changes? Hi Zhengqiao, That is unfortunate. Sorry. This patch has changed when the hpd callback is registered, no when it comes in effect. This is still dependent on calling .set_jack() and it is not happening any later than it was before. So, in theory, it should not have changed anything, if your driver actually relies on the HPD event. Trying to guess what is happening for you, I suppose your HDMI driver is "faking" an HPD event to report the initial jack status when the hook_plugged_cb() is called. Could you point me to the hdmi driver you are using so I can have a look ? My reference when testing this was dw-hdmi-i2s-audio and it does not do that, it just registers the callback. I think this is what it supposed to do TBH. An idea I have been thinking about for a while is have the hdmi-codec insert the jack in the card itself, instead of the card doing. That would give the jack "for free" to any user of the HDMI codec and might also solve your issue. It would require a small rework of the cards doing the hdmi jack register, but there are not many of these AFAIK. > > On Mon, Nov 6, 2023 at 6:40 PM Jerome Brunet <jbrunet@baylibre.com> wrote: > > The HDMI hotplug callback to the hdmi-codec is currently registered when > jack is set. > > The hotplug not only serves to report the ASoC jack state but also to get > the ELD. It should be registered when the component probes instead, so it > does not depend on the card driver registering a jack for the HDMI to > properly report the ELD. > > Fixes: 25ce4f2b3593 ("ASoC: hdmi-codec: Get ELD in before reporting plugged event") > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> > --- > sound/soc/codecs/hdmi-codec.c | 27 +++++++++++++++++++-------- > 1 file changed, 19 insertions(+), 8 deletions(-) > > diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c > index 09eef6042aad..20da1eaa4f1c 100644 > --- a/sound/soc/codecs/hdmi-codec.c > +++ b/sound/soc/codecs/hdmi-codec.c > @@ -877,18 +877,13 @@ static int hdmi_codec_set_jack(struct snd_soc_component *component, > void *data) > { > struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component); > - int ret = -ENOTSUPP; > > if (hcp->hcd.ops->hook_plugged_cb) { > hcp->jack = jack; > - ret = hcp->hcd.ops->hook_plugged_cb(component->dev->parent, > - hcp->hcd.data, > - plugged_cb, > - component->dev); > - if (ret) > - hcp->jack = NULL; > + return 0; > } > - return ret; > + > + return -ENOTSUPP; > } > > static int hdmi_dai_spdif_probe(struct snd_soc_dai *dai) > @@ -982,6 +977,21 @@ static int hdmi_of_xlate_dai_id(struct snd_soc_component *component, > return ret; > } > > +static int hdmi_probe(struct snd_soc_component *component) > +{ > + struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component); > + int ret = 0; > + > + if (hcp->hcd.ops->hook_plugged_cb) { > + ret = hcp->hcd.ops->hook_plugged_cb(component->dev->parent, > + hcp->hcd.data, > + plugged_cb, > + component->dev); > + } > + > + return ret; > +} > + > static void hdmi_remove(struct snd_soc_component *component) > { > struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component); > @@ -992,6 +1002,7 @@ static void hdmi_remove(struct snd_soc_component *component) > } > > static const struct snd_soc_component_driver hdmi_driver = { > + .probe = hdmi_probe, > .remove = hdmi_remove, > .dapm_widgets = hdmi_widgets, > .num_dapm_widgets = ARRAY_SIZE(hdmi_widgets), -- Jerome ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] ASoC: hdmi-codec: register hpd callback on component probe 2023-12-15 7:57 ` Jerome Brunet @ 2023-12-15 22:55 ` Hsin-Yi Wang 2023-12-18 10:28 ` Jerome Brunet 0 siblings, 1 reply; 5+ messages in thread From: Hsin-Yi Wang @ 2023-12-15 22:55 UTC (permalink / raw) To: Jerome Brunet; +Cc: Zhengqiao Xia, Mark Brown, alsa-devel, linux-kernel On Fri, Dec 15, 2023 at 12:40 AM Jerome Brunet <jbrunet@baylibre.com> wrote: > > > On Fri 15 Dec 2023 at 12:51, Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com> wrote: > > > Hi Jerome, > > > > After my testing, I found that this patch will cause the audio on the external display to not work properly after > > restart. > > You move the plugged_cb to run in hdmi_probe, at this time hcp- > jack = NULL, the driver cannot report `SND_JACK_LINEOUT > > ` normally. > > static void hdmi_codec_jack_report(struct hdmi_codec_priv *hcp, > > unsigned int jack_status) > > { > > printk("xzq-866 hdmi_codec_jack_report: jack=%x, jack_status=%d", hcp->jack, jack_status != hcp->jack_status); > > if (hcp->jack && jack_status != hcp->jack_status) { > > snd_soc_jack_report(hcp->jack, jack_status, SND_JACK_LINEOUT); > > hcp->jack_status = jack_status; > > } > > } > > So we must call plugged_cb in hdmi_codec_set_jack, Can you make some changes? > > Hi Zhengqiao, > > That is unfortunate. Sorry. > > This patch has changed when the hpd callback is registered, no when it > comes in effect. This is still dependent on calling .set_jack() and it > is not happening any later than it was before. So, in theory, it should > not have changed anything, if your driver actually relies on the HPD > event. > > Trying to guess what is happening for you, I suppose your HDMI driver is > "faking" an HPD event to report the initial jack status when the > hook_plugged_cb() is called. Could you point me to the hdmi driver you > are using so I can have a look ? > > My reference when testing this was dw-hdmi-i2s-audio and it does not do > that, it just registers the callback. I think this is what it supposed > to do TBH. > > An idea I have been thinking about for a while is have the hdmi-codec > insert the jack in the card itself, instead of the card doing. That > would give the jack "for free" to any user of the HDMI codec and might > also solve your issue. It would require a small rework of the cards doing > the hdmi jack register, but there are not many of these AFAIK. > The driver is it6505. The implementation of hook_plugged_cb(): 1. register plugged_cb 2. call plugged_cb(bool plugged) bridge detect callback it6505_detect would also call plugged_cb, but only on the first time hpd status changed (eg. changed from connect <--> disconnect) it6505_detect() { status = it6505->hpd_state ... ... if (it6505->connector_status != status) { it6505->connector_status = status; it6505_plugged_status_to_codec(it6505); // this will call plugged_cb } } Unfortunately the first time after boot that hpd status changed was detected before set_jack. If we replug hdmi, the plugged_cb() was called by bridge_detect, which is expected. Prior to this patch, the initial plugged_cb() was called by hook_plugged_cb(). After the patch, plugged_cb() should be called by hpd change (by bridge detect), but due to the driver logic only calling it on the first hpd state change, it fails to call plugged_cb() again when jack is set. I checked the dw-hdmi.c's bridge_detect, and it's similar in that it also checks the last_connector_result, so maybe it's due to a timing difference? > > > > On Mon, Nov 6, 2023 at 6:40 PM Jerome Brunet <jbrunet@baylibre.com> wrote: > > > > The HDMI hotplug callback to the hdmi-codec is currently registered when > > jack is set. > > > > The hotplug not only serves to report the ASoC jack state but also to get > > the ELD. It should be registered when the component probes instead, so it > > does not depend on the card driver registering a jack for the HDMI to > > properly report the ELD. > > > > Fixes: 25ce4f2b3593 ("ASoC: hdmi-codec: Get ELD in before reporting plugged event") > > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> > > --- > > sound/soc/codecs/hdmi-codec.c | 27 +++++++++++++++++++-------- > > 1 file changed, 19 insertions(+), 8 deletions(-) > > > > diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c > > index 09eef6042aad..20da1eaa4f1c 100644 > > --- a/sound/soc/codecs/hdmi-codec.c > > +++ b/sound/soc/codecs/hdmi-codec.c > > @@ -877,18 +877,13 @@ static int hdmi_codec_set_jack(struct snd_soc_component *component, > > void *data) > > { > > struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component); > > - int ret = -ENOTSUPP; > > > > if (hcp->hcd.ops->hook_plugged_cb) { > > hcp->jack = jack; > > - ret = hcp->hcd.ops->hook_plugged_cb(component->dev->parent, > > - hcp->hcd.data, > > - plugged_cb, > > - component->dev); > > - if (ret) > > - hcp->jack = NULL; > > + return 0; > > } > > - return ret; > > + > > + return -ENOTSUPP; > > } > > > > static int hdmi_dai_spdif_probe(struct snd_soc_dai *dai) > > @@ -982,6 +977,21 @@ static int hdmi_of_xlate_dai_id(struct snd_soc_component *component, > > return ret; > > } > > > > +static int hdmi_probe(struct snd_soc_component *component) > > +{ > > + struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component); > > + int ret = 0; > > + > > + if (hcp->hcd.ops->hook_plugged_cb) { > > + ret = hcp->hcd.ops->hook_plugged_cb(component->dev->parent, > > + hcp->hcd.data, > > + plugged_cb, > > + component->dev); > > + } > > + > > + return ret; > > +} > > + > > static void hdmi_remove(struct snd_soc_component *component) > > { > > struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component); > > @@ -992,6 +1002,7 @@ static void hdmi_remove(struct snd_soc_component *component) > > } > > > > static const struct snd_soc_component_driver hdmi_driver = { > > + .probe = hdmi_probe, > > .remove = hdmi_remove, > > .dapm_widgets = hdmi_widgets, > > .num_dapm_widgets = ARRAY_SIZE(hdmi_widgets), > > > -- > Jerome ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] ASoC: hdmi-codec: register hpd callback on component probe 2023-12-15 22:55 ` Hsin-Yi Wang @ 2023-12-18 10:28 ` Jerome Brunet 0 siblings, 0 replies; 5+ messages in thread From: Jerome Brunet @ 2023-12-18 10:28 UTC (permalink / raw) To: Hsin-Yi Wang Cc: Jerome Brunet, Zhengqiao Xia, Mark Brown, alsa-devel, linux-kernel On Fri 15 Dec 2023 at 14:55, Hsin-Yi Wang <hsinyi@google.com> wrote: > On Fri, Dec 15, 2023 at 12:40 AM Jerome Brunet <jbrunet@baylibre.com> wrote: >> >> >> On Fri 15 Dec 2023 at 12:51, Zhengqiao Xia >> <xiazhengqiao@huaqin.corp-partner.google.com> wrote: >> >> > Hi Jerome, >> > >> > After my testing, I found that this patch will cause the audio on the external display to not work properly after >> > restart. >> > You move the plugged_cb to run in hdmi_probe, at this time hcp- > jack = NULL, the driver cannot report `SND_JACK_LINEOUT >> > ` normally. >> > static void hdmi_codec_jack_report(struct hdmi_codec_priv *hcp, >> > unsigned int jack_status) >> > { >> > printk("xzq-866 hdmi_codec_jack_report: jack=%x, jack_status=%d", hcp->jack, jack_status != hcp->jack_status); >> > if (hcp->jack && jack_status != hcp->jack_status) { >> > snd_soc_jack_report(hcp->jack, jack_status, SND_JACK_LINEOUT); >> > hcp->jack_status = jack_status; >> > } >> > } >> > So we must call plugged_cb in hdmi_codec_set_jack, Can you make some changes? >> >> Hi Zhengqiao, >> >> That is unfortunate. Sorry. >> >> This patch has changed when the hpd callback is registered, no when it >> comes in effect. This is still dependent on calling .set_jack() and it >> is not happening any later than it was before. So, in theory, it should >> not have changed anything, if your driver actually relies on the HPD >> event. >> >> Trying to guess what is happening for you, I suppose your HDMI driver is >> "faking" an HPD event to report the initial jack status when the >> hook_plugged_cb() is called. Could you point me to the hdmi driver you >> are using so I can have a look ? >> >> My reference when testing this was dw-hdmi-i2s-audio and it does not do >> that, it just registers the callback. I think this is what it supposed >> to do TBH. >> >> An idea I have been thinking about for a while is have the hdmi-codec >> insert the jack in the card itself, instead of the card doing. That >> would give the jack "for free" to any user of the HDMI codec and might >> also solve your issue. It would require a small rework of the cards doing >> the hdmi jack register, but there are not many of these AFAIK. >> > > The driver is it6505. The implementation of hook_plugged_cb(): > 1. register plugged_cb > 2. call plugged_cb(bool plugged) > > bridge detect callback it6505_detect would also call plugged_cb, but > only on the first time hpd status changed (eg. changed from connect > <--> disconnect) > it6505_detect() { > status = it6505->hpd_state ... > ... > if (it6505->connector_status != status) { > it6505->connector_status = status; > it6505_plugged_status_to_codec(it6505); // this will call plugged_cb > } > } > > Unfortunately the first time after boot that hpd status changed was > detected before set_jack. If we replug hdmi, the plugged_cb() was > called by bridge_detect, which is expected. > > Prior to this patch, the initial plugged_cb() was called by hook_plugged_cb(). > After the patch, plugged_cb() should be called by hpd change (by > bridge detect), but due to the driver logic only calling it on the > first hpd state change, it fails to call plugged_cb() again when jack > is set. This is what thought > > I checked the dw-hdmi.c's bridge_detect, and it's similar in that it > also checks the last_connector_result, so maybe it's due to a timing > difference? No, I have overlooked that. I'm preparing a fix. I'll Cc you. Eventually, I still would like to make it easier for cards to use the HDMI jack and have to codec do that registration on its own. It will require some rework of cards already doing it. I've only seen 2 cards doing that at the moment: * imx-hdmi.c * mt8188-mt6359.c Could you point me to yours ? > >> > >> > On Mon, Nov 6, 2023 at 6:40 PM Jerome Brunet <jbrunet@baylibre.com> wrote: >> > >> > The HDMI hotplug callback to the hdmi-codec is currently registered when >> > jack is set. >> > >> > The hotplug not only serves to report the ASoC jack state but also to get >> > the ELD. It should be registered when the component probes instead, so it >> > does not depend on the card driver registering a jack for the HDMI to >> > properly report the ELD. >> > >> > Fixes: 25ce4f2b3593 ("ASoC: hdmi-codec: Get ELD in before reporting plugged event") >> > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> >> > --- >> > sound/soc/codecs/hdmi-codec.c | 27 +++++++++++++++++++-------- >> > 1 file changed, 19 insertions(+), 8 deletions(-) >> > >> > diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c >> > index 09eef6042aad..20da1eaa4f1c 100644 >> > --- a/sound/soc/codecs/hdmi-codec.c >> > +++ b/sound/soc/codecs/hdmi-codec.c >> > @@ -877,18 +877,13 @@ static int hdmi_codec_set_jack(struct snd_soc_component *component, >> > void *data) >> > { >> > struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component); >> > - int ret = -ENOTSUPP; >> > >> > if (hcp->hcd.ops->hook_plugged_cb) { >> > hcp->jack = jack; >> > - ret = hcp->hcd.ops->hook_plugged_cb(component->dev->parent, >> > - hcp->hcd.data, >> > - plugged_cb, >> > - component->dev); >> > - if (ret) >> > - hcp->jack = NULL; >> > + return 0; >> > } >> > - return ret; >> > + >> > + return -ENOTSUPP; >> > } >> > >> > static int hdmi_dai_spdif_probe(struct snd_soc_dai *dai) >> > @@ -982,6 +977,21 @@ static int hdmi_of_xlate_dai_id(struct snd_soc_component *component, >> > return ret; >> > } >> > >> > +static int hdmi_probe(struct snd_soc_component *component) >> > +{ >> > + struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component); >> > + int ret = 0; >> > + >> > + if (hcp->hcd.ops->hook_plugged_cb) { >> > + ret = hcp->hcd.ops->hook_plugged_cb(component->dev->parent, >> > + hcp->hcd.data, >> > + plugged_cb, >> > + component->dev); >> > + } >> > + >> > + return ret; >> > +} >> > + >> > static void hdmi_remove(struct snd_soc_component *component) >> > { >> > struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component); >> > @@ -992,6 +1002,7 @@ static void hdmi_remove(struct snd_soc_component *component) >> > } >> > >> > static const struct snd_soc_component_driver hdmi_driver = { >> > + .probe = hdmi_probe, >> > .remove = hdmi_remove, >> > .dapm_widgets = hdmi_widgets, >> > .num_dapm_widgets = ARRAY_SIZE(hdmi_widgets), >> >> >> -- >> Jerome -- Jerome ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2023-12-18 11:03 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-11-06 10:40 [PATCH] ASoC: hdmi-codec: register hpd callback on component probe Jerome Brunet
2023-11-06 13:03 ` Mark Brown
[not found] ` <CADYyEwTNyY+fR9SgfDa-g6iiDwkU3MUdPVCYexs2_3wbcM8_vg@mail.gmail.com>
2023-12-15 7:57 ` Jerome Brunet
2023-12-15 22:55 ` Hsin-Yi Wang
2023-12-18 10:28 ` Jerome Brunet
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®