From: Jerome Brunet <jbrunet@baylibre.com>
To: Stefan Agner <stefan@agner.ch>, robh+dt@kernel.org, khilman@baylibre.com
Cc: narmstrong@baylibre.com, martin.blumenstingl@googlemail.com,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: meson: fix PHY deassert timing requirements
Date: Tue, 01 Dec 2020 09:31:47 +0100 [thread overview]
Message-ID: <1j8sai7wr0.fsf@starbuckisacylon.baylibre.com> (raw)
In-Reply-To: <e4df74aed2a7cff09366e72c87d408f41317907f.1606782187.git.stefan@agner.ch>
On Tue 01 Dec 2020 at 01:25, Stefan Agner <stefan@agner.ch> wrote:
> According to the datasheet (Rev. 1.4, page 30) the RTL8211F requires
> at least 50ms "for internal circuits settling time" before accessing
> the PHY registers. This fixes an issue where the Ethernet link doesn't
> come up when using ip link set down/up:
> [ 29.360965] meson8b-dwmac ff3f0000.ethernet eth0: Link is Down
> [ 34.569012] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=31)
> [ 34.676732] meson8b-dwmac ff3f0000.ethernet: Failed to reset the dma
> [ 34.678874] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
> [ 34.687850] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Hw setup failed
>
> Fixes: 658e4129bb81 ("arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line")
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
> arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> index 6982632ae646..a5652caacb27 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> @@ -413,7 +413,7 @@ external_phy: ethernet-phy@0 {
> max-speed = <1000>;
>
> reset-assert-us = <10000>;
> - reset-deassert-us = <30000>;
> + reset-deassert-us = <50000>;
> reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
>
> interrupt-parent = <&gpio_intc>;
Thanks for sharing this is Stefan,
The title of your patch should probably be modified to show that it
addresses the odroid n2 only, as it stands.
I have checked the RTL8211F doc I have, v1.9, and this one mention
"72ms at least - not including the 1.0V supply rise time" before
accessing the PHY registers :/ ... so 80ms maybe ?
next prev parent reply other threads:[~2020-12-01 8:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-01 0:25 Stefan Agner
2020-12-01 8:31 ` Jerome Brunet [this message]
2020-12-01 8:52 ` Stefan Agner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1j8sai7wr0.fsf@starbuckisacylon.baylibre.com \
--to=jbrunet@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®