* linux 2.2.18pre17 + VM-global -7 = `Negative d_count' oops [not found] ` <39F4AB91.72F2C300@transmeta.com> @ 2000-10-26 17:37 ` Ian Jackson 2000-10-26 23:05 ` Andrea Arcangeli 2000-10-27 11:14 ` Ian Jackson 0 siblings, 2 replies; 4+ messages in thread From: Ian Jackson @ 2000-10-26 17:37 UTC (permalink / raw) To: Andrea Arcangeli; +Cc: Linux Kernel Mailing List Andrea Arcangeli writes ("Re: linux 2.2.18-pre17: "Kernel panic: LRU list corrupted""): > I also included the fix in a new VM-global patch against vanilla 2.2.18pre17 > (the VM-global patch is available as a single patch inside 2.2.18pre17aa1/ > directory too but I have to maintain a separate version of it against clean > 2.2.18pre17 due silly rejects that I can't avoid) > > ftp://ftp.us.kernel.org/pub/linux/kernel/people/andrea/patches/v2.2/2.2.18pre17/VM-global-2.2.18pre17-7.bz2 I've been having apparently VM-related `pauses' with 2.2.17 [1], so I thought I'd try 2.2.18pre17 with that patch. The results weren't good: I get many instances of Negative d_count (-805538369) for [binary garbage]/<NULL> followed by an oops. Kernel logfile extract below, uuencoded. I'm sure I'd be able to reproduce this, but I'd rather not because this is a production system. ver_linux reports: chiark:linux-2.2.17-chiark> sh scripts/ver_linux -- Versions installed: (if some fields are empty or looks -- unusual then possibly you have very old versions) Linux chiark 2.2.17 #2 Thu Oct 26 10:57:45 BST 2000 i586 unknown Kernel modules 2.3.11 Gnu C 2.95.2 Binutils 2.9.5.0.37 Linux C Library 2.1.3 Dynamic linker ldd: version 1.9.11 Procps 2.0.6 Mount 2.10f Net-tools 2.05 Kbd 0.99 Sh-utils 2.0 cat: /proc/modules: No such file or directory Modules Loaded chiark:linux-2.2.17-chiark> I don't know why it says `Kernel modules 2.3.11', since I have disabled kernel modules completely. My CPU is: processor : 0 vendor_id : AuthenticAMD cpu family : 5 model : 8 model name : AMD-K6(tm) 3D processor stepping : 0 cpu MHz : 350.808 cache size : 64 KB fdiv_bug : no hlt_bug : no sep_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr mce cx8 sep mmx 3dnow bogomips : 699.60 REPORTING-BUGS wanted me to include /proc/scsi/scsi, so here it is: Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: IBM Model: DCAS-34330 Rev: S65A Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 02 Lun: 00 Vendor: IBM Model: DCAS-34330 Rev: S65A Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 04 Lun: 00 Vendor: HP Model: T20 Rev: 3.01 Type: Sequential-Access ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: IBM Model: DNES-318350W Rev: SA30 Type: Direct-Access ANSI SCSI revision: 03 It might be relevant that a large part of the system's job is to be a shell account server, and users log in with a variety of mechanisms, most often OpenSSH (Debian 1.2.3-9). I've not had any reports from users about sessions randomly dropping, which I might have expected; however, I did have a number of background cron jobs die in very strange ways suggesting killing of processes at random. The system as a whole is largely Debian 2.2, and has 256Mb of RAM and about 400Mb of swap. It usually runs with about 50-100Mb of swap used and at a load of somewhere around 1ish during busy periods. [1] VM lockup problem: I believe that this is a known problem with the 2.2.x VM ? The symptoms I have are that under reasonably high but not excessive VM and/or disk load, the system will freeze for around 10-15 minutes. Most often this seems to have beeen provoked by a moderately large (20Mb or so) Emacs doing an auto-save during an otherwise-busy time. During the lockup network packets are processed - pings receive replies, and TCP connection attempts succeed, but there is no evidence of any user-mode executing. After the lockup the system apparently just resumes where it left off. Sometimes afterwards there is a message like `VM: do_try_to_free_pages failed for emacs...' but more often there isn't. Thanks for your attention, Ian. begin 664 chiark-oops M3V-T(#(U(#$U.C`U.C`U(&-H:6%R:R!K97)N96PZ($%D9&EN9R!3=V%P.B`T M,#DU.3)K('-W87`M<W!A8V4@*'!R:6]R:71Y(#$P*0I/8W0@,C4@,3<Z,S8Z M,S,@8VAI87)K(&ME<FYE;#H@3F5G871I=F4@9%]C;W5N="`H+3@P-34S.#,V M.2D@9F]R(%PR,3-$)%Y$7#(P,\!>5#E$)%Y0=5Y#,<##N./____#7#(Q,?9< M,C$S1"1>1%PR,#/`7E0Y1"1>4'5>1[C[____PUPR,C"XX____\-<,C$Q]KA= M7D$O/$Y53$P^"D]C="`R-2`Q-SHS-CHS,R!C:&EA<FL@:V5R;F5L.B!5;F%B M;&4@=&\@:&%N9&QE(&ME<FYE;"!.54Q,('!O:6YT97(@9&5R969E<F5N8V4@ M870@=FER='5A;"!A9&1R97-S(#`P,#`P,#`P"D]C="`R-2`Q-SHS-CHS,R!C M:&EA<FL@:V5R;F5L.B!C=7)R96YT+3YT<W,N8W(S(#T@,#8S,F(P,#`L("4E M8W(S(#T@,#8S,F(P,#`*3V-T(#(U(#$W.C,V.C,S(&-H:6%R:R!K97)N96PZ M("IP9&4@/2`P,#`P,#`P,`I/8W0@,C4@,3<Z,S8Z,S,@8VAI87)K(&ME<FYE M;#H@3V]P<SH@,#`P,@I/8W0@,C4@,3<Z,S8Z,S,@8VAI87)K(&ME<FYE;#H@ M0U!5.B`@("`P"D]C="`R-2`Q-SHS-CHS,R!C:&EA<FL@:V5R;F5L.B!%25`Z M("`@(#`P,3`Z6V1P=70K,S$P+S,R.%T*3V-T(#(U(#$W.C,V.C,S(&-H:6%R M:R!K97)N96PZ($5&3$%'4SH@,#`P,3`R.38*3V-T(#(U(#$W.C,V.C,S(&-H M:6%R:R!K97)N96PZ(&5A>#H@,#`P,#`P-C0@("!E8G@Z(&-F9F,W,#(P("`@ M96-X.B!C86-C8S`P,"`@(&5D>#H@,#`P,#`P,68*3V-T(#(U(#$W.C,V.C,S M(&-H:6%R:R!K97)N96PZ(&5S:3H@8V9F8S<U8F8@("!E9&DZ(&-F9F,W,#(P M("`@96)P.B`P,#`P,#`P,"`@(&5S<#H@8V%C8V1C8V,*3V-T(#(U(#$W.C,V M.C,S(&-H:6%R:R!K97)N96PZ(&1S.B`P,#$X("`@97,Z(#`P,3@@("!S<SH@ M,#`Q.`I/8W0@,C4@,3<Z,S8Z,S,@8VAI87)K(&ME<FYE;#H@4')O8V5S<R!E M>'!R("AP:60Z(#$X-S`V+"!P<F]C97-S(&YR.B`S,C`L('-T86-K<&%G93UC M86-C9#`P,"D*3V-T(#(U(#$W.C,V.C,S(&-H:6%R:R!K97)N96PZ(%-T86-K M.B!C,#$X,S=D,"`P,#`P,#`P,"!C,V1C9#@Q8R!C9F9C.3$V,"!C,#$R,6(S M82!C9F9C-S`R,"!C,V1C9#@Q8R`P.#`T8C`P,"`*3V-T(#(U(#$W.C,V.C,S M(&-H:6%R:R!K97)N96PZ("`@("`@("!C,#`P,#`P,"!C,#$R,F,W-R!C,V1C M9#@Q8R!C,V1C9#@Q8R!C8C$Y,#EC,"!C,#$S,#0R.2!C,V1C9#@Q8R!C,#%D M868W."`*3V-T(#(U(#$W.C,V.C,S(&-H:6%R:R!K97)N96PZ("`@("`@("!F M9F9F9F9F."!C86-C8S`P,"!C86-C9&4V."!C,#$Q83`R,"!C9&,U,&1E8R`P M,#`P,#`X,"!C86-C9&4V."`P,#`Q9F1D-R`*3V-T(#(U(#$W.C,V.C,S(&-H M:6%R:R!K97)N96PZ($-A;&P@5')A8V4Z(%MH=6YG7W5P7W1T>5]R96%D*S`O M,C1=(%M?7V9P=70K-C(O-S)=(%MF<'5T*S(S+S<R72!;;&]A9%]E;&9?8FEN M87)Y*S$Y,S,O,CDW,ET@6V1O7V=E;F5R:6-?9FEL95]R96%D*S$T.3(O,34P M-%T@6W)E861?97AE8RLS-C,O,S@P72!;<V5A<F-H7V)I;F%R>5]H86YD;&5R M*S<Q+S$X.%T@"D]C="`R-2`Q-SHS-CHS,R!C:&EA<FL@:V5R;F5L.B`@("`@ M("`@6V1O7V5X96-V92LT,C4O-#DR72!;<WES7V5X96-V92LT-R\Y,ET@6W-Y M<W1E;5]C86QL*S4R+S4V72`*3V-T(#(U(#$W.C,V.C,S(&-H:6%R:R!K97)N M96PZ($-O9&4Z(&,W(#`U(#`P(#`P(#`P(#`P(#`P(#`P(#`P(#`P(#@S(&,T M(#$P(#5B(#5E(&,S(#@Y(&8V(#4S(#AB(`I/8W0@,C4@,3@Z,#<Z,#<@8VAI M87)K(&ME<FYE;#H@3F5G871I=F4@9%]C;W5N="`H+3@P-34S.#,V.2D@9F]R M(%PR,3-$)%Y$7#(P,\!>5#E$)%Y0=5Y#,<##N./____#7#(Q,?9<,C$S1"1> M1%PR,#/`7E0Y1"1>4'5>1[C[____PUPR,C"XX____\-<,C$Q]KA=7D$O/$Y5 M3$P^"D]C="`R-2`Q.#HP-SHP-R!C:&EA<FL@:V5R;F5L.B!5;F%B;&4@=&\@ M:&%N9&QE(&ME<FYE;"!.54Q,('!O:6YT97(@9&5R969E<F5N8V4@870@=FER M='5A;"!A9&1R97-S(#`P,#`P,#`P"D]C="`R-2`Q.#HP-SHP-R!C:&EA<FL@ M:V5R;F5L.B!C=7)R96YT+3YT<W,N8W(S(#T@,#5F-3$P,#`L("4E8W(S(#T@ M,#5F-3$P,#`*3V-T(#(U(#$X.C`W.C`W(&-H:6%R:R!K97)N96PZ("IP9&4@ M/2`P,#`P,#`P,`I/8W0@,C4@,3@Z,#<Z,#<@8VAI87)K(&ME<FYE;#H@3V]P M<SH@,#`P,@I/8W0@,C4@,3@Z,#<Z,#<@8VAI87)K(&ME<FYE;#H@0U!5.B`@ M("`P"D]C="`R-2`Q.#HP-SHP-R!C:&EA<FL@:V5R;F5L.B!%25`Z("`@(#`P M,3`Z6V1P=70K,S$P+S,R.%T*3V-T(#(U(#$X.C`W.C`W(&-H:6%R:R!K97)N M96PZ($5&3$%'4SH@,#`P,3`R.38*3V-T(#(U(#$X.C`W.C`W(&-H:6%R:R!K M97)N96PZ(&5A>#H@,#`P,#`P-C0@("!E8G@Z(&-F9F,W,#(P("`@96-X.B!C M-61E93`P,"`@(&5D>#H@,#`P,#`P,38*3V-T(#(U(#$X.C`W.C`W(&-H:6%R M:R!K97)N96PZ(&5S:3H@8V9F8S<U8F8@("!E9&DZ(&-F9F,W,#(P("`@96)P M.B`P,#`P,#`P,"`@(&5S<#H@8S5D969C8V,*3V-T(#(U(#$X.C`W.C`W(&-H M:6%R:R!K97)N96PZ(&1S.B`P,#$X("`@97,Z(#`P,3@@("!S<SH@,#`Q.`I/ M8W0@,C4@,3@Z,#<Z,#<@8VAI87)K(&ME<FYE;#H@4')O8V5S<R!E>'!R("AP M:60Z(#(S,C8P+"!P<F]C97-S(&YR.B`Q-CDL('-T86-K<&%G93UC-61E9C`P M,"D*3V-T(#(U(#$X.C`W.C`W(&-H:6%R:R!K97)N96PZ(%-T86-K.B!C,#$X M,S=D,"`P,#`P,#`P,"!C8S4V93=D8R!C9F9C.3$V,"!C,#$R,6(S82!C9F9C M-S`R,"!C8S4V93=D8R`P.#`T8C`P,"`*3V-T(#(U(#$X.C`W.C`W(&-H:6%R M:R!K97)N96PZ("`@("`@("!C,#`P,#`P,"!C,#$R,F,W-R!C8S4V93=D8R!C M8S4V93=D8R!C9F9E9#AC,"!C,#$S,#0R.2!C8S4V93=D8R!C,#%D868W."`* M3V-T(#(U(#$X.C`W.C`W(&-H:6%R:R!K97)N96PZ("`@("`@("!F9F9F9F9F M."!C-61E93`P,"!C-61E9F4V."!C,#$Q83`R,"!C9&,U,&1E8R`P,#`P,#`X M,"!C-61E9F4V."`P,#`Q9F1D-R`*3V-T(#(U(#$X.C`W.C`W(&-H:6%R:R!K M97)N96PZ($-A;&P@5')A8V4Z(%MH=6YG7W5P7W1T>5]R96%D*S`O,C1=(%M? M7V9P=70K-C(O-S)=(%MF<'5T*S(S+S<R72!;;&]A9%]E;&9?8FEN87)Y*S$Y M,S,O,CDW,ET@6V1O7V=E;F5R:6-?9FEL95]R96%D*S$T.3(O,34P-%T@6W)E M861?97AE8RLS-C,O,S@P72!;<V5A<F-H7V)I;F%R>5]H86YD;&5R*S<Q+S$X M.%T@"D]C="`R-2`Q.#HP-SHP-R!C:&EA<FL@:V5R;F5L.B`@("`@("`@6V1O M7V5X96-V92LT,C4O-#DR72!;<WES7V5X96-V92LT-R\Y,ET@6W-Y<W1E;5]C M86QL*S4R+S4V72`*3V-T(#(U(#$X.C`W.C`W(&-H:6%R:R!K97)N96PZ($-O M9&4Z(&,W(#`U(#`P(#`P(#`P(#`P(#`P(#`P(#`P(#`P(#@S(&,T(#$P(#5B 4(#5E(&,S(#@Y(&8V(#4S(#AB(`H` ` end - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: linux 2.2.18pre17 + VM-global -7 = `Negative d_count' oops 2000-10-26 17:37 ` linux 2.2.18pre17 + VM-global -7 = `Negative d_count' oops Ian Jackson @ 2000-10-26 23:05 ` Andrea Arcangeli 2000-10-27 11:14 ` Ian Jackson 1 sibling, 0 replies; 4+ messages in thread From: Andrea Arcangeli @ 2000-10-26 23:05 UTC (permalink / raw) To: Ian Jackson; +Cc: Linux Kernel Mailing List On Thu, Oct 26, 2000 at 06:37:37PM +0100, Ian Jackson wrote: > Negative d_count (-805538369) for [binary garbage]/<NULL> > > followed by an oops. Kernel logfile extract below, uuencoded. Thanks for the feedback. The oops is forced by the kernel after it sees then wrong negative d_count. I'd say it's memory corruption, but it doesn't look like a memory bitflip. I'm almost certain that it's not caused by the VM-global patch. Which device driver and compiler are you using? Andrea - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: linux 2.2.18pre17 + VM-global -7 = `Negative d_count' oops 2000-10-26 17:37 ` linux 2.2.18pre17 + VM-global -7 = `Negative d_count' oops Ian Jackson 2000-10-26 23:05 ` Andrea Arcangeli @ 2000-10-27 11:14 ` Ian Jackson 2000-10-27 15:42 ` Andrea Arcangeli 1 sibling, 1 reply; 4+ messages in thread From: Ian Jackson @ 2000-10-27 11:14 UTC (permalink / raw) To: Andrea Arcangeli; +Cc: Linux Kernel Mailing List Andrea Arcangeli writes ("Re: linux 2.2.18pre17 + VM-global -7 = `Negative d_count' oops"): > On Thu, Oct 26, 2000 at 06:37:37PM +0100, Ian Jackson wrote: > > Negative d_count (-805538369) for [binary garbage]/<NULL> > > > > followed by an oops. Kernel logfile extract below, uuencoded. > > Thanks for the feedback. > > The oops is forced by the kernel after it sees then wrong negative d_count. > > I'd say it's memory corruption, but it doesn't look like a memory bitflip. > > I'm almost certain that it's not caused by the VM-global patch. > > Which device driver and compiler are you using? chiark:~> gcc -v Reading specs from /usr/lib/gcc-lib/i386-linux/2.95.2/specs gcc version 2.95.2 20000220 (Debian GNU/Linux) chiark:~> dpkg -l gcc Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err:uppercase=bad) ||/ Name Version Description +++-==============-==============-============================================ ii gcc 2.95.2-13 The GNU C compiler. chiark:~> I've enclosed a copy of `.config' from the 2.2.18pre17+VM-global. I forgot to mention, and it might be relevant (given that the oops is in `hung_up_tty_read'), that I'm using a VPN system of my own devising which gets packets in and out of the kernel by using `slattach' on pty's; it has no nonstandard kernel component, but probably has some unusual pty handling behaviour. If you really want to look at what it does, the source is on ftp.chiark.greenend.org.uk in ipif/service.c inside /users/ian/userv/userv-utils-0.2.0.tar.gz. Ian. # # Automatically generated by make menuconfig: don't edit # # # Code maturity level options # # CONFIG_EXPERIMENTAL is not set # # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set CONFIG_M586TSC=y # CONFIG_M686 is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_TSC=y # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set CONFIG_1GB=y # CONFIG_2GB is not set # CONFIG_MATH_EMULATION is not set # CONFIG_MTRR is not set # CONFIG_SMP is not set # # Loadable module support # # CONFIG_MODULES is not set # # General setup # CONFIG_NET=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_QUIRKS=y CONFIG_PCI_OLD_PROC=y # CONFIG_MCA is not set # CONFIG_VISWS is not set CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_PARPORT is not set # CONFIG_APM is not set # CONFIG_TOSHIBA is not set # # Plug and Play support # # CONFIG_PNP is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_IDE is not set # CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_MD=y # CONFIG_MD_LINEAR is not set CONFIG_MD_STRIPED=y # CONFIG_MD_MIRRORING is not set # CONFIG_MD_RAID5 is not set # CONFIG_MD_BOOT is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_PARIDE_PARPORT=y # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_HD is not set # # Networking options # CONFIG_PACKET=y CONFIG_NETLINK=y CONFIG_RTNETLINK=y CONFIG_NETLINK_DEV=y CONFIG_FIREWALL=y CONFIG_FILTER=y CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set CONFIG_IP_ADVANCED_ROUTER=y CONFIG_RTNETLINK=y CONFIG_NETLINK=y # CONFIG_IP_MULTIPLE_TABLES is not set # CONFIG_IP_ROUTE_MULTIPATH is not set # CONFIG_IP_ROUTE_TOS is not set CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_ROUTE_LARGE_TABLES is not set # CONFIG_IP_PNP is not set CONFIG_IP_FIREWALL=y CONFIG_IP_FIREWALL_NETLINK=y CONFIG_NETLINK_DEV=y # CONFIG_IP_TRANSPARENT_PROXY is not set # CONFIG_IP_MASQUERADE is not set # CONFIG_IP_ROUTER is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set CONFIG_IP_ALIAS=y CONFIG_SYN_COOKIES=y # CONFIG_INET_RARP is not set CONFIG_SKB_LARGE=y # CONFIG_IPX is not set # CONFIG_ATALK is not set # # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # # SCSI support # CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # # SCSI low-level drivers # # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_NCR53C7xx is not set CONFIG_SCSI_NCR53C8XX=y CONFIG_SCSI_SYM53C8XX=y CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=40 # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set # CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_SCSI is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set CONFIG_NET_ISA=y # CONFIG_AT1700 is not set # CONFIG_E2100 is not set # CONFIG_DEPCA is not set # CONFIG_EWRK3 is not set # CONFIG_EEXPRESS is not set # CONFIG_EEXPRESS_PRO is not set # CONFIG_FMV18X is not set # CONFIG_HPLAN_PLUS is not set # CONFIG_HPLAN is not set # CONFIG_HP100 is not set CONFIG_NE2000=y # CONFIG_SK_G16 is not set # CONFIG_NET_EISA is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_SK98LIN is not set # CONFIG_FDDI is not set # CONFIG_PPP is not set CONFIG_SLIP=y CONFIG_SLIP_COMPRESSED=y # CONFIG_SLIP_SMART is not set # CONFIG_SLIP_MODE_SLIP6 is not set # CONFIG_NET_RADIO is not set # # Token ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # # Wan interfaces # # CONFIG_HOSTESS_SV11 is not set # CONFIG_COSA is not set # CONFIG_SEALEVEL_4021 is not set # CONFIG_SYNCLINK_SYNCPPP is not set # CONFIG_LANMEDIA is not set # CONFIG_COMX is not set # CONFIG_DLCI is not set # CONFIG_WAN_DRIVERS is not set # CONFIG_XPEED is not set # CONFIG_SBNI is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y # CONFIG_SERIAL is not set # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=1024 # CONFIG_MOUSE is not set # # Joysticks # # CONFIG_JOYSTICK is not set # CONFIG_QIC02_TAPE is not set # CONFIG_WATCHDOG is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set # CONFIG_INTEL_RNG is not set # # Video For Linux # # CONFIG_VIDEO_DEV is not set # CONFIG_DTLK is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # # USB support # # CONFIG_USB is not set # # Filesystems # # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_FAT_FS is not set # CONFIG_MSDOS_FS is not set # CONFIG_UMSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_ISO9660_FS is not set # CONFIG_JOLIET is not set CONFIG_MINIX_FS=y # CONFIG_NTFS_FS is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y CONFIG_DEVPTS_FS=y # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # # CONFIG_CODA_FS is not set # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SUNRPC is not set # CONFIG_LOCKD is not set # CONFIG_SMB_FS is not set # CONFIG_NCP_FS is not set # # Partition Types # # CONFIG_BSD_DISKLABEL is not set # CONFIG_MAC_PARTITION is not set # CONFIG_SMD_DISKLABEL is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_NLS is not set # # Console drivers # CONFIG_VGA_CONSOLE=y # CONFIG_VIDEO_SELECT is not set # # Sound # # CONFIG_SOUND is not set # # Kernel hacking # # CONFIG_MAGIC_SYSRQ is not set - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: linux 2.2.18pre17 + VM-global -7 = `Negative d_count' oops 2000-10-27 11:14 ` Ian Jackson @ 2000-10-27 15:42 ` Andrea Arcangeli 0 siblings, 0 replies; 4+ messages in thread From: Andrea Arcangeli @ 2000-10-27 15:42 UTC (permalink / raw) To: Ian Jackson; +Cc: Linux Kernel Mailing List On Fri, Oct 27, 2000 at 12:14:56PM +0100, Ian Jackson wrote: > gcc version 2.95.2 20000220 (Debian GNU/Linux) Please give a try to 2.95.2 19991024 (release) or egcs 1.1.2 or gcc 2.7.2.3. I don't see anything strange in your .config. Andrea - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2000-10-27 15:42 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20001025050631.A6817@athlon.random>
[not found] ` <39F4AB91.72F2C300@transmeta.com>
2000-10-26 17:37 ` linux 2.2.18pre17 + VM-global -7 = `Negative d_count' oops Ian Jackson
2000-10-26 23:05 ` Andrea Arcangeli
2000-10-27 11:14 ` Ian Jackson
2000-10-27 15:42 ` Andrea Arcangeli
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®