mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* 2.4.0-test12-pre6 on alpha
@ 2000-12-07  1:47 Wakko Warner
  2000-12-07 14:50 ` Jay Estabrook
  0 siblings, 1 reply; 2+ messages in thread
From: Wakko Warner @ 2000-12-07  1:47 UTC (permalink / raw)
  To: linux-kernel

I'm glad to say that this is the first 2.4 kernel that works on my noritake
alpha with a pci-pci bridge.

I have a small problem.  If I reboot, the srm console can't boot from dka0.
Doing a: show dev
doesn't list any of the hard drives in the machine.
doing an init causes it to reset and find all the drives again.

-- 
 Lab tests show that use of micro$oft causes cancer in lab animals
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: 2.4.0-test12-pre6 on alpha
  2000-12-07  1:47 2.4.0-test12-pre6 on alpha Wakko Warner
@ 2000-12-07 14:50 ` Jay Estabrook
  0 siblings, 0 replies; 2+ messages in thread
From: Jay Estabrook @ 2000-12-07 14:50 UTC (permalink / raw)
  To: Wakko Warner; +Cc: linux-kernel

On Wed, Dec 06, 2000 at 08:47:23PM -0500, Wakko Warner wrote:
> I'm glad to say that this is the first 2.4 kernel that works on my noritake
> alpha with a pci-pci bridge.
> 
> I have a small problem.  If I reboot, the srm console can't boot from dka0.
> Doing a: show dev
> doesn't list any of the hard drives in the machine.
> doing an init causes it to reset and find all the drives again.

During boot, the Linux kernel code (on Alpha) changes the PCI resource
settings of cards and bridges alike. Some SRM consoles do not appreciate
this... ;-}

There is code in 2.2 that restores card/bridge settings before exiting
the kernel back to console mode. This code has NOT been ported to 2.4,
due primarily to the size of the changes made to 2.4 in that area.

Could you verify that 2.2 (take the latest, please) DOES exit to SRM
correctly?

A workaround for 2.4 is to set "boot_reset" to ON in SRM, which will
force a full reset before continuing the boot. Yes, I know, for a lot
of situations this is overkill, but at least it will do the right thing
under the above described situations...

Good luck.

--Jay++

-----------------------------------------------------------------------------
Jay A Estabrook                            Alpha Engineering - LINUX Project
Compaq Computer Corp. - MRO1-2/K20         (508) 467-2080
200 Forest Street, Marlboro MA 01752       Jay.Estabrook@compaq.com
-----------------------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2000-12-07 15:19 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-12-07  1:47 2.4.0-test12-pre6 on alpha Wakko Warner
2000-12-07 14:50 ` Jay Estabrook

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®