From: Adrian Chung <adrian@enfusion-group.com>
To: linux-kernel@vger.kernel.org
Cc: Andre Hedrick <andre@linux-ide.org>
Subject: Re: Promise Ultra66 DMA problems.
Date: Sat, 6 Jan 2001 00:05:07 -0500 [thread overview]
Message-ID: <20010106000507.A2278@rogue.enfusion-group.com> (raw)
In-Reply-To: <20010105170838.A1674@rogue.enfusion-group.com>; from adrian@enfusion-group.com on Fri, Jan 05, 2001 at 05:08:38PM -0500
On Fri, Jan 05, 2001 at 05:08:38PM -0500, Adrian Chung wrote:
> hde: Maxtor 91024U3, ATA DISK drive
> hdf: Maxtor 94098U8, ATA DISK drive
> hdg: QUANTUM FIREBALLP LM15, ATA DISK drive
> hdh: QUANTUM FIREBALLP LM30, ATA DISK drive
I initially added only the two quantum drives to the pdc_quirk_list,
and that had no effect, the machine still hung on boot up at the same
place. After this, I added the other two Maxtor's as well, and with
all four drives in the pdc_quirk_list, the system booted up fine.
Should I narrow this down further? Will it be detrimental in any way
to have all four drives listed in the quirks table if they needn't be?
cat /proc/ide/pdc:
PDC20262 Chipset.
---------------------------- General Status ---------------------------------
Burst Mode : enabled
Host Mode : Normal
Bus Clocking : 33 PCI Internal
IO pad select : 4 mA
Status Polling Period : 0
Interrupt Check Status Polling Delay : 0
------------ Primary Channel ---------------- Secondary Channel -------------
enabled enabled
66 Clocking enabled enabled
Mode PCI Mode PCI
FIFO Empty FIFO Empty
------------ drive0 --------- drive1 -------- drive0 ---------- drive1 ------
DMA enabled: yes yes yes yes
DMA Mode: UDMA 4 UDMA 4 UDMA 4 UDMA 4
PIO Mode: PIO 4 PIO 4 PIO 4 PIO 4
and hdparm yields about 25Mbit/s.
I'm trying to get the runtime system to hang like it did before as
well... I'm running "dd if=/dev/hdX of=/dev/null &" on all four
drives simultaneously, and about 3 times per drive to hit the
controller and disk I/O system really hard. So far, it's all been
fine. Hopefully that means that the problems gone away. :)
Thanks for the help!
--
Adrian
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2001-01-06 5:05 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-01-05 22:08 Adrian Chung
2001-01-05 22:42 ` Andre Hedrick
2001-01-06 5:05 ` Adrian Chung [this message]
2001-01-06 15:39 ` Rick Haines
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010106000507.A2278@rogue.enfusion-group.com \
--to=adrian@enfusion-group.com \
--cc=andre@linux-ide.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®