From: Tim Hockin <thockin@isunix.it.ilstu.edu>
To: linux-kernel@vger.kernel.org
Subject: IDE not fully found (2.4.0)
Date: Mon, 15 Jan 2001 20:58:06 -0600 (CST) [thread overview]
Message-ID: <200101160258.UAA04062@isunix.it.ilstu.edu> (raw)
Just built a new system with Linux-2.4.0.
Motherboard (MSI 694D-AR) has Via Apollo Pro chipset, those IDE drives seem
fine. Board also has a promise PDC20265 RAID/ATA100 controller. On each
channel of this controller I have an IBM 45 GB ATA100 drive as master.
(hde and hdg?). BIOS sees these drives fine. Linux only see hde and never
hdg (ide[012] but not ide3). I thought I'd post it here, in case anyone
else knew the answer right away.
Second question: Does the RAID functionality of this device work under
linux? If so, is it better than LVM or MD?
boot snippet:
---------------
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a IDE UDMA66 controller on pci0:7.1
ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:DMA, hdd:pio
PDC20265: IDE controller on PCI bus 00 dev 60
PDC20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
PDC20265: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER
Mode.
ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:pio, hdf:pio
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next reply other threads:[~2001-01-16 3:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-01-16 2:58 Tim Hockin [this message]
2001-01-16 4:07 ` Andre Hedrick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200101160258.UAA04062@isunix.it.ilstu.edu \
--to=thockin@isunix.it.ilstu.edu \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®