* IDE not fully found (2.4.0)
@ 2001-01-16 2:58 Tim Hockin
2001-01-16 4:07 ` Andre Hedrick
0 siblings, 1 reply; 2+ messages in thread
From: Tim Hockin @ 2001-01-16 2:58 UTC (permalink / raw)
To: linux-kernel
Just built a new system with Linux-2.4.0.
Motherboard (MSI 694D-AR) has Via Apollo Pro chipset, those IDE drives seem
fine. Board also has a promise PDC20265 RAID/ATA100 controller. On each
channel of this controller I have an IBM 45 GB ATA100 drive as master.
(hde and hdg?). BIOS sees these drives fine. Linux only see hde and never
hdg (ide[012] but not ide3). I thought I'd post it here, in case anyone
else knew the answer right away.
Second question: Does the RAID functionality of this device work under
linux? If so, is it better than LVM or MD?
boot snippet:
---------------
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a IDE UDMA66 controller on pci0:7.1
ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:DMA, hdd:pio
PDC20265: IDE controller on PCI bus 00 dev 60
PDC20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
PDC20265: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER
Mode.
ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:pio, hdf:pio
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: IDE not fully found (2.4.0)
2001-01-16 2:58 IDE not fully found (2.4.0) Tim Hockin
@ 2001-01-16 4:07 ` Andre Hedrick
0 siblings, 0 replies; 2+ messages in thread
From: Andre Hedrick @ 2001-01-16 4:07 UTC (permalink / raw)
To: Tim Hockin; +Cc: linux-kernel, Andries.Brouwer
On Mon, 15 Jan 2001, Tim Hockin wrote:
> Just built a new system with Linux-2.4.0.
>
> Motherboard (MSI 694D-AR) has Via Apollo Pro chipset, those IDE drives seem
> fine. Board also has a promise PDC20265 RAID/ATA100 controller. On each
> channel of this controller I have an IBM 45 GB ATA100 drive as master.
> (hde and hdg?). BIOS sees these drives fine. Linux only see hde and never
> hdg (ide[012] but not ide3). I thought I'd post it here, in case anyone
> else knew the answer right away.
Ask AE...B
> Second question: Does the RAID functionality of this device work under
> linux? If so, is it better than LVM or MD?
NO, frauds allowed (raid)
> boot snippet:
> ---------------
> VP_IDE: IDE controller on PCI bus 00 dev 39
> VP_IDE: chipset revision 16
> VP_IDE: not 100% native mode: will probe irqs later
> VP_IDE: VIA vt82c686a IDE UDMA66 controller on pci0:7.1
> ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:DMA, hdd:pio
> PDC20265: IDE controller on PCI bus 00 dev 60
> PDC20265: chipset revision 2
> PDC20265: not 100% native mode: will probe irqs later
> PDC20265: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER
> Mode.
> ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:pio, hdf:pio
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> Please read the FAQ at http://www.tux.org/lkml/
>
Andre Hedrick
Linux ATA Development
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2001-01-16 4:08 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-01-16 2:58 IDE not fully found (2.4.0) Tim Hockin
2001-01-16 4:07 ` Andre Hedrick
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®