Hang when booting 2.4.0/2.4.1-pre8 on Compaq 1850R with SMART 3200

Hang when booting 2.4.0/2.4.1-pre8 on Compaq 1850R with SMART 3200

[Ian Macdonald]

I'm currently experiencing difficulty booting Linux 2.4.0 on a Compaq
1850R server with a SMART 3200 controller on board.

When the SMART array is detected and the cpqarray driver is loaded,
the system hangs at the following point:

Compaq SMART2 Driver (v 2.4.1)
Found 1 controller(s)
cpqarray ida/c0d0: blksz=512 nr_blks=17764320
Partition check:
 ida/c0d0:_

The partition check never starts.

I get the same results when booting 2.4.1-pre8. The system works fine
with the 2.2.x kernel series, but I need some of the functionality in
the newer 2.4.x series.

Any ideas?

Ian
-- 
Ian Macdonald               | Inspite of all evidence to the contrary,   
Senior System Administrator | the entire universe is composed of only two
Linuxcare, Inc.             | basic substances: magic and bullshit.      
Support for the Revolution  |                                            
                            |                                            
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

Re: Hang when booting 2.4.0/2.4.1-pre8 on Compaq 1850R with SMART 3200

[egger]

On 19 Jan, Ian Macdonald wrote:

> I get the same results when booting 2.4.1-pre8. The system works fine
> with the 2.2.x kernel series, but I need some of the functionality in
> the newer 2.4.x series.

 Try tweaking the controller BIOS, I cannot recall what the option was
 called but there is a switch for different operating system which has
 to be flipped in order to work with 2.4.

-- 

Servus,
       Daniel

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/