* kernel 2.4.2-ac14 in vmware - hangs
@ 2001-03-09 0:41 Mike Panetta
2001-03-09 0:56 ` Alan Cox
0 siblings, 1 reply; 2+ messages in thread
From: Mike Panetta @ 2001-03-09 0:41 UTC (permalink / raw)
To: linux-kernel
I am using VMware to test a linux install
and since I have upgraded to 2.4.2-ac14
the VM locks up right after:
calibrating APIC timer ...
..... CPU clock speed is 1152.4771 MHz.
..... host bus clock speed is 0.0000 MHz.
cpu: 0, clocks: 0, slice: 0
The last line is where it locks up... Its
kind of suspicious that the clock speeds are wrong,
The CPU speed should be 733 MHz (unless VMWare is using
both my CPU's?) and I am almost 100% sure that the
bus speed should not be 0.0000 MHz!
Can anyhone help me with this?
Is it a bug on my part or what?
Thanks,
Mike
--
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: kernel 2.4.2-ac14 in vmware - hangs
2001-03-09 0:41 kernel 2.4.2-ac14 in vmware - hangs Mike Panetta
@ 2001-03-09 0:56 ` Alan Cox
0 siblings, 0 replies; 2+ messages in thread
From: Alan Cox @ 2001-03-09 0:56 UTC (permalink / raw)
To: Mike Panetta; +Cc: linux-kernel
> I am using VMware to test a linux install
> and since I have upgraded to 2.4.2-ac14
> the VM locks up right after:
Last time I looked at reports like this it seemed that vmware wasnt
good enough to emulate all the stuff the 2.4 kernel uses. You may find you
can get it to work with the nmi watchdog and apic disabled
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2001-03-09 0:54 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-03-09 0:41 kernel 2.4.2-ac14 in vmware - hangs Mike Panetta
2001-03-09 0:56 ` Alan Cox
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®