Re: Matrox FB console driver

Re: Matrox FB console driver

[Andy Carlson]

time prime before x
real    1m23.535s
user    0m40.550s
sys     0m42.980s

/proc/mtrr before x
reg00: base=0x00000000 (   0MB), size= 256MB: write-back, count=1
reg01: base=0xfd800000 (4056MB), size=   4MB: write-combining, count=1

time prime after x
real    0m48.732s
user    0m41.070s
sys     0m7.690s

/proc/mtrr after x
reg00: base=0x00000000 (   0MB), size= 256MB: write-back, count=1
reg01: base=0xfd800000 (4056MB), size=   4MB: write-combining, count=1

time prime in X
real    0m42.835s
user    0m41.180s
sys     0m1.710s

/proc/version
Linux version 2.4.3-ac12 (root@bigandy) (gcc version 2.95.2 19991024 (release)) #15 SMP Mon Apr 23 19:35:33 CDT 2001

/proc/cpuinfo
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 1
model name	: Pentium Pro
stepping	: 9
cpu MHz		: 199.312
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
bogomips	: 397.31

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 1
model name	: Pentium Pro
stepping	: 7
cpu MHz		: 199.312
cache size	: 512 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 2
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
bogomips	: 398.13


Andy Carlson                           |\      _,,,---,,_
naclos@swbell.net                ZZZzz /,`.-'`'    -.  ;-;;,_
BJC Health System                     |,4-  ) )-,_. ,\ (  `'-'
St. Louis, Missouri                  '---''(_/--'  `-'\_)
Cat Pics: http://andyc.dyndns.org

On Mon, 23 Apr 2001, Mark Hahn wrote:

> > I was playing around with a program that I was using to time differences
> > between kernels (a silly prime program that puts out 1000000 primes).  I
> > noticed a very strange behaviour.  On a fresh boot, with the Penguin
> > pictures that the Matrox FB driver puts up, the prime program runs
> > 1 minute, 30 seconds.  If I reset, it still runs 1M30S.  If I start X,
> > and exit, it runs 48 seconds.  Is this a known behaviour?  Thanks.
> 
> do you mean that running and exiting X makes your computer faster?
> is /proc/mtrr sane at both times?
> 

Re: [lkml]Re: Matrox FB console driver

[thunder7]

On Tue, Apr 24, 2001 at 06:19:31AM -0500, Andy Carlson wrote:
> time prime before x
> real    1m23.535s
> user    0m40.550s
> sys     0m42.980s
> 
> /proc/mtrr before x
> reg00: base=0x00000000 (   0MB), size= 256MB: write-back, count=1
> reg01: base=0xfd800000 (4056MB), size=   4MB: write-combining, count=1
> 
> time prime after x
> real    0m48.732s
> user    0m41.070s
> sys     0m7.690s
> 
> /proc/mtrr after x
> reg00: base=0x00000000 (   0MB), size= 256MB: write-back, count=1
> reg01: base=0xfd800000 (4056MB), size=   4MB: write-combining, count=1
> 
> time prime in X
> real    0m42.835s
> user    0m41.180s
> sys     0m1.710s
> 
Well, it isn't that.
Still, it was recently discussed that X might leave some settings in the
video-card (Matrox).

So I tried the following:

time spdtest.sh before X with spdtest.sh:

#!/bin/sh
i=1
while [ $i -lt 500 ]
do
   clear
   echo $i
   cat test.out;
   i=`expr $i + 1`
done

and after X, no change.
This is a G400/32 Mb with framebuffer @ 1600x1200x16bpp, and X 4.0.3,
same resolution. Kernel 2.4.3-ac12, Abit VP6 dual P3/866.

There was no significant change in any of the reported times.

I don't know. Your problem is interesting. Do other programs have this
too?

Jurriaan
-- 
And the gosts of hope walk silent halls
At the death of the promised land
All is gone, all is gone
But these changing winds can turn cold and hostile
	New Model Army
GNU/Linux 2.4.3-ac12 SMP/ReiserFS 2x1743 bogomips load av: 0.00 0.03 0.01

Re: Matrox FB console driver

[Petr Vandrovec]

On Tue, Apr 24, 2001 at 06:19:31AM -0500, Andy Carlson wrote:
> time prime before x
> real    1m23.535s
> user    0m40.550s
> sys     0m42.980s
> 
> time prime in X
> real    0m42.835s
> user    0m41.180s
> sys     0m1.710s

There can be two reasons:
(1) You are using matrox's mga module. They have
    'program chip core to production level frequency
    instead of bios safe one' in their changelog.
    Although difference 100% makes (2) more probably.
(2) matroxfb does not try to activate any AGP transfer
    mode. Maybe some X driver tries and succeeds.

You can try:

time dd if=/dev/zero of=/dev/fb0 bs=1M count=8

before X and after X. If times are same, then it is
chip core frequency. If times are 2:1, it is either
chip memory freqency, or AGP...
				Petr Vandrovec
				vandrove@vc.cvut.cz

Matrox FB console driver

[Andy Carlson]

I was playing around with a program that I was using to time differences
between kernels (a silly prime program that puts out 1000000 primes).  I
noticed a very strange behaviour.  On a fresh boot, with the Penguin
pictures that the Matrox FB driver puts up, the prime program runs
1 minute, 30 seconds.  If I reset, it still runs 1M30S.  If I start X,
and exit, it runs 48 seconds.  Is this a known behaviour?  Thanks.

Andy Carlson                           |\      _,,,---,,_
naclos@swbell.net                ZZZzz /,`.-'`'    -.  ;-;;,_
BJC Health System                     |,4-  ) )-,_. ,\ (  `'-'
St. Louis, Missouri                  '---''(_/--'  `-'\_)
Cat Pics: http://andyc.dyndns.org