mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* aic7xxx problem on -ac series
@ 2001-05-24 17:15 Costas Tavernarakis
  2001-05-24 18:15 ` Josh Logan
  0 siblings, 1 reply; 3+ messages in thread
From: Costas Tavernarakis @ 2001-05-24 17:15 UTC (permalink / raw)
  To: linux-kernel

Hi all,

I'm not subscribed to LKML, so please Cc: me with any replies.

I'm running 2.4.5-pre4 with success on an ASUS-CUV4X-D based system
(noapic boot parameter, highmem). This kernel works for me (with a few
occasional hard lockups, but that's another story).

However, I'm having trouble with kernels from the -ac series.
These kernels (with noapic) halt while detecting the first scsi
controller on the system. The messages I get are:

SCSI subsystem driver Revision: 1.00
PCI: Found IRQ9 for device 00:09.0
PCI: The same IRQ used for device 00:0a.1
ahc_pci: 0:90: Using left over BIOS settings

and then the system stops responding.

while -pre4 goes ahead to print:

scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.13
        <Adaptec 29160N Ultra160 SCSI adapter>
        aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs
...

The same problem is seen with virtually all kernels in
2.4.4-ac series, including -ac15. (haven't tried any
earlier -ac, though).

lspci on this system gives:

00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
00:04.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00:04.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16)
00:04.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16)
00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:09.0 SCSI storage controller: Adaptec 7892A (rev 02)
00:0a.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev 14)
00:0a.1 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev 14)
00:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 74)
00:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 08)
00:0c.1 Input device controller: Creative Labs SB Live! (rev 08)
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 82)

ver_linux output:
Linux idefix 2.4.5-pre4 #4 SMP Mon May 21 14:52:36 EEST 2001 i686 unknown
 
Gnu C                  2.95.4
Gnu make               3.79.1
binutils               2.11.90.0.7
util-linux             2.11b
mount                  2.11b
modutils               2.4.6
e2fsprogs              1.19
reiserfsprogs          3.x.0j
Linux C Library        2.2.3
Dynamic linker (ldd)   2.2.3
Procps                 2.0.7
Net-tools              1.60
Console-tools          0.2.3
Sh-utils               2.0.11
Modules Loaded         

I am, of course, willing to provide any more information you
may find important and/or to test any patches.
I'm not a kernel expert, though...


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: aic7xxx problem on -ac series
  2001-05-24 17:15 aic7xxx problem on -ac series Costas Tavernarakis
@ 2001-05-24 18:15 ` Josh Logan
  2001-05-24 18:34   ` Costas Tavernarakis
  0 siblings, 1 reply; 3+ messages in thread
From: Josh Logan @ 2001-05-24 18:15 UTC (permalink / raw)
  To: Costas Tavernarakis; +Cc: linux-kernel


I have also seen this problem...  I don't have any ideas.  Is this a
module or compiled in?

							Later, JOSH

On Thu, 24 May 2001, Costas Tavernarakis wrote:

> Hi all,
> 
> I'm not subscribed to LKML, so please Cc: me with any replies.
> 
> I'm running 2.4.5-pre4 with success on an ASUS-CUV4X-D based system
> (noapic boot parameter, highmem). This kernel works for me (with a few
> occasional hard lockups, but that's another story).
> 
> However, I'm having trouble with kernels from the -ac series.
> These kernels (with noapic) halt while detecting the first scsi
> controller on the system. The messages I get are:
> 
> SCSI subsystem driver Revision: 1.00
> PCI: Found IRQ9 for device 00:09.0
> PCI: The same IRQ used for device 00:0a.1
> ahc_pci: 0:90: Using left over BIOS settings
> 
> and then the system stops responding.
> 
> while -pre4 goes ahead to print:
> 
> scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.13
>         <Adaptec 29160N Ultra160 SCSI adapter>
>         aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs
> ...
> 
> The same problem is seen with virtually all kernels in
> 2.4.4-ac series, including -ac15. (haven't tried any
> earlier -ac, though).
> 
> lspci on this system gives:
> 
> 00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4)
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
> 00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
> 00:04.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
> 00:04.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16)
> 00:04.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16)
> 00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
> 00:09.0 SCSI storage controller: Adaptec 7892A (rev 02)
> 00:0a.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev 14)
> 00:0a.1 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c875 (rev 14)
> 00:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 74)
> 00:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 08)
> 00:0c.1 Input device controller: Creative Labs SB Live! (rev 08)
> 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 82)
> 
> ver_linux output:
> Linux idefix 2.4.5-pre4 #4 SMP Mon May 21 14:52:36 EEST 2001 i686 unknown
>  
> Gnu C                  2.95.4
> Gnu make               3.79.1
> binutils               2.11.90.0.7
> util-linux             2.11b
> mount                  2.11b
> modutils               2.4.6
> e2fsprogs              1.19
> reiserfsprogs          3.x.0j
> Linux C Library        2.2.3
> Dynamic linker (ldd)   2.2.3
> Procps                 2.0.7
> Net-tools              1.60
> Console-tools          0.2.3
> Sh-utils               2.0.11
> Modules Loaded         
> 
> I am, of course, willing to provide any more information you
> may find important and/or to test any patches.
> I'm not a kernel expert, though...
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: aic7xxx problem on -ac series
  2001-05-24 18:15 ` Josh Logan
@ 2001-05-24 18:34   ` Costas Tavernarakis
  0 siblings, 0 replies; 3+ messages in thread
From: Costas Tavernarakis @ 2001-05-24 18:34 UTC (permalink / raw)
  To: Josh Logan; +Cc: Costas Tavernarakis, linux-kernel

On Thu, May 24, 2001 at 11:15:25AM -0700, Josh Logan wrote:
> 
> I have also seen this problem...  I don't have any ideas.  Is this a
> module or compiled in?
> 

Compiled in. It connects the boot disk.

Maybe it's not an aic7xxx problem but a pci one, since
2.4.5-pre uses the same version of the driver.

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2001-05-24 18:35 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-05-24 17:15 aic7xxx problem on -ac series Costas Tavernarakis
2001-05-24 18:15 ` Josh Logan
2001-05-24 18:34   ` Costas Tavernarakis

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®