* Thermal extensions/cleanups
@ 2001-07-11 20:02 Pavel Machek
0 siblings, 0 replies; only message in thread
From: Pavel Machek @ 2001-07-11 20:02 UTC (permalink / raw)
To: andrew.grover, ACPI mailing list; +Cc: kernel list
Hi!
This cleans up existing thermal code a bit, plus implements usefull
info file, plus implements way to force fan on/off and force
throttling. [If it conflicts with patch you already applied, let
me know and I'll produce better version.]
Please apply,
Pavel
--- clean/drivers/acpi/ospm/thermal/tz_osl.c Sun Jul 8 23:26:35 2001
+++ linux/drivers/acpi/ospm/thermal/tz_osl.c Tue Jul 10 22:04:45 2001
@@ -29,6 +29,7 @@
#include <linux/init.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
+#include <asm/uaccess.h>
#include <acpi.h>
#include "tz.h"
@@ -36,7 +37,7 @@
MODULE_AUTHOR("Andrew Grover");
MODULE_DESCRIPTION("ACPI Component Architecture (CA) - Thermal Zone Driver");
-int TZP = 0;
+int TZP = 30;
MODULE_PARM(TZP, "i");
MODULE_PARM_DESC(TZP, "Thermal zone polling frequency, in 1/10 seconds.\n");
@@ -64,17 +65,50 @@
int *eof,
void *context)
{
- TZ_CONTEXT *thermal_zone = NULL;
+ TZ_CONTEXT *tz = NULL;
+ TZ_THRESHOLD *threshold = NULL;
char *p = page;
int len = 0;
+ int i;
if (!context || (off != 0)) {
goto end;
}
- thermal_zone = (TZ_CONTEXT*)context;
+ tz = (TZ_CONTEXT*)context;
+
+ p += sprintf(p, "Polling Frequency: ");
+ switch (tz->policy.polling_freq) {
+ case 0:
+ p += sprintf(p, "n/a\n");
+ break;
+ default:
+ p += sprintf(p, "%d ds\n", tz->policy.polling_freq);
+ break;
+ }
+
+ p += sprintf(p, "Thresholds: ");
+
+ for (i = 0; i < tz->policy.threshold_list.count; i++) {
+
+ threshold = &(tz->policy.threshold_list.thresholds[i]);
+
+ switch (threshold->type) {
+
+ case TZ_THRESHOLD_CRITICAL:
+ p += sprintf(p, "Critical: %d dK ", threshold->temperature);
+ break;
+
+ case TZ_THRESHOLD_PASSIVE:
+ p += sprintf(p, "Passive: TC1=%d TC2=%d TSP=%d %d dK ", tz->policy.passive.tc1, tz->policy.passive.tc2, tz->policy.passive.tsp, tz->policy.passive.threshold->temperature);
+ break;
- p += sprintf(p, "<TBD>\n");
+ case TZ_THRESHOLD_ACTIVE:
+ p += sprintf(p, "Active[%d]: %d dK ", threshold->index, threshold->temperature);
+ break;
+ }
+ }
+ p += sprintf(p, "\n");
end:
len = (p - page);
@@ -113,8 +147,8 @@
thermal_zone = (TZ_CONTEXT*)context;
- p += sprintf(p, "Temperature: %d (1/10th degrees Kelvin)\n",
- thermal_zone->policy.temperature);
+ p += sprintf(p, "Temperature: %d dK\n",
+ thermal_zone->policy.temperature );
p += sprintf(p, "State: ");
if (thermal_zone->policy.state & TZ_STATE_ACTIVE) {
@@ -127,7 +161,7 @@
p += sprintf(p, "critical ");
}
if (thermal_zone->policy.state == 0) {
- p += sprintf(p, "ok ");
+ p += sprintf(p, "ok");
}
p += sprintf(p, "\n");
@@ -150,7 +184,7 @@
p += sprintf(p, "n/a\n");
break;
default:
- p += sprintf(p, "%d (1/10th seconds)\n", thermal_zone->policy.polling_freq);
+ p += sprintf(p, "%d ds\n", thermal_zone->policy.polling_freq);
break;
}
@@ -165,6 +199,53 @@
return(len);
}
+static void
+do_fan(TZ_CONTEXT *tz, u32 on)
+{
+ TZ_THRESHOLD *active = NULL;
+ u32 i = 0;
+
+ for (i = 0; i < TZ_MAX_ACTIVE_THRESHOLDS; i++) {
+ if (!(active = tz->policy.active.threshold[i]))
+ break;
+ tz_policy_active_do(tz, active, on);
+ }
+}
+
+int
+tz_osl_proc_write_status(struct file *file, const char *buffer,
+ unsigned long count, void *context)
+{
+ TZ_CONTEXT *tz = NULL;
+ int len = 0;
+ char buf[256], buf2[256];
+
+ tz = (TZ_CONTEXT*)context;
+
+ if (count > 250)
+ return -EPERM;
+ if (copy_from_user(buf, buffer, count))
+ return -EFAULT;
+ buf[count] = 0;
+ printk("osl_write_status: %s...", buf);
+ if (!strcmp(buf, "dec"))
+ tz_policy_passive_do(tz, PR_PERF_DEC);
+ if (!strcmp(buf, "inc"))
+ tz_policy_passive_do(tz, PR_PERF_INC);
+ if (!strncmp(buf, "limit", 5)) {
+ char *s;
+ int i = simple_strtoul(buf+5, &s, 0);
+ tz_policy_passive_do(tz, i);
+ }
+ if (!strcmp(buf, "fanon"))
+ do_fan(tz, ACPI_STATE_D0);
+ if (!strcmp(buf, "fanoff"))
+ do_fan(tz, ACPI_STATE_D3);
+
+ return -EL3RST;
+}
+
+
/****************************************************************************
*
@@ -176,7 +257,7 @@
tz_osl_add_device(
TZ_CONTEXT *thermal_zone)
{
- struct proc_dir_entry *proc_entry = NULL;
+ struct proc_dir_entry *proc_entry = NULL, *proc;
if (!thermal_zone) {
return(AE_BAD_PARAMETER);
@@ -185,15 +266,19 @@
printk("Thermal Zone: found\n");
proc_entry = proc_mkdir(thermal_zone->uid, tz_proc_root);
- if (!proc_entry) {
+ if (!proc_entry)
return(AE_ERROR);
- }
- create_proc_read_entry(TZ_PROC_STATUS, S_IFREG | S_IRUGO,
+ proc = create_proc_read_entry(TZ_PROC_STATUS, S_IFREG | S_IRUGO,
proc_entry, tz_osl_proc_read_status, (void*)thermal_zone);
+ if (!proc)
+ return(AE_ERROR);
+ proc->write_proc = tz_osl_proc_write_status;
- create_proc_read_entry(TZ_PROC_INFO, S_IFREG | S_IRUGO,
+ proc = create_proc_read_entry(TZ_PROC_INFO, S_IFREG | S_IRUGO,
proc_entry, tz_osl_proc_read_info, (void*)thermal_zone);
+ if (!proc)
+ return(AE_ERROR);
return(AE_OK);
}
--- clean/drivers/acpi/ospm/thermal/tzpolicy.c Sun Jul 8 23:26:35 2001
+++ linux/drivers/acpi/ospm/thermal/tzpolicy.c Tue Jul 10 00:08:15 2001
@@ -59,6 +59,8 @@
* Internal Functions
****************************************************************************/
+
+/* FIXME: Should not this call pr_perf_set_limit? */
ACPI_STATUS
set_performance_limit (
BM_HANDLE device_handle,
@@ -75,7 +77,8 @@
status = bm_request(&request);
if (ACPI_FAILURE(status)) {
+ printk(KERN_CRIT "Unable to set performance limit to %d\n", flag);
return status;
}
else {
@@ -125,6 +130,17 @@
*
****************************************************************************/
+void
+tz_policy_passive_do(TZ_CONTEXT *tz, u32 flag)
+{
+ TZ_PASSIVE_POLICY *passive = NULL;
+ u32 i = 0;
+
+ passive = &(tz->policy.passive);
+ for (i=0; i<passive->threshold->cooling_devices.count; i++)
+ set_performance_limit(passive->threshold->cooling_devices.handles[i], flag);
+}
+
ACPI_STATUS
tz_policy_passive(
TZ_CONTEXT *tz)
@@ -161,26 +177,16 @@
* Decrease thermal performance limit on all passive
* cooling devices (processors).
*/
- if (trend > 0) {
- for (i=0; i<passive->threshold->cooling_devices.count; i++) {
- set_performance_limit(
- passive->threshold->cooling_devices.handles[i],
- PR_PERF_DEC);
- }
- }
+ if (trend > 0)
+ tz_policy_passive_do(tz, PR_PERF_DEC);
/*
* Cooling Off?
* ------------
* Increase thermal performance limit on all passive
* cooling devices (processors).
*/
- else if (trend < 0) {
- for (i=0; i<passive->threshold->cooling_devices.count; i++) {
- set_performance_limit(
- passive->threshold->cooling_devices.handles[i],
- PR_PERF_INC);
- }
- }
+ else if (trend < 0)
+ tz_policy_passive_do(tz, PR_PERF_INC);
}
return(AE_OK);
@@ -199,6 +205,21 @@
*
****************************************************************************/
+void
+tz_policy_active_do(TZ_CONTEXT *tz, TZ_THRESHOLD *active, u32 state)
+{
+ u32 j = 0;
+ ACPI_STATUS status = AE_OK;
+
+ printk("Setting active cooling: %d\n", state);
+
+ for (j = 0; j < active->cooling_devices.count; j++) {
+ status = bm_set_device_power_state(active->cooling_devices.handles[j], state);
+ if (!ACPI_SUCCESS(status))
+ printk(KERN_CRIT "ACPI: Failed to turn active cooling on/off.\n");
+ }
+}
+
ACPI_STATUS
tz_policy_active(
TZ_CONTEXT *tz)
@@ -212,11 +233,8 @@
}
for (i = 0; i < TZ_MAX_ACTIVE_THRESHOLDS; i++) {
-
- active = tz->policy.active.threshold[i];
- if (!active) {
+ if (!(active = tz->policy.active.threshold[i]))
break;
- }
/*
* Above Threshold?
@@ -226,19 +244,7 @@
*/
if ((tz->policy.temperature >= active->temperature) &&
(active->cooling_state != TZ_COOLING_ENABLED)) {
-
- for (j = 0; j < active->cooling_devices.count; j++) {
-
- status = bm_set_device_power_state(
- active->cooling_devices.handles[j],
- ACPI_STATE_D0);
-
- if (ACPI_SUCCESS(status)) {
- }
- else {
- }
- }
-
+ tz_policy_active_do(tz, active, ACPI_STATE_D0);
active->cooling_state = TZ_COOLING_ENABLED;
}
/*
@@ -251,19 +257,7 @@
* during the first pass.
*/
else if (active->cooling_state != TZ_COOLING_DISABLED) {
-
- for (j = 0; j < active->cooling_devices.count; j++) {
-
- status = bm_set_device_power_state(
- active->cooling_devices.handles[j],
- ACPI_STATE_D3);
-
- if (ACPI_SUCCESS(status)) {
- }
- else {
- }
- }
-
+ tz_policy_active_do(tz, active, ACPI_STATE_D3);
active->cooling_state = TZ_COOLING_DISABLED;
}
}
@@ -330,12 +324,13 @@
if ((tz->policy.critical.threshold) &&
(tz->policy.temperature >= tz->policy.critical.threshold->temperature)) {
tz->policy.state |= TZ_STATE_CRITICAL;
+ printk(KERN_CRIT "ACPI: CPU temperature critical\n");
}
/* Passive? */
if ((tz->policy.passive.threshold) &&
(tz->policy.temperature >= tz->policy.passive.threshold->temperature)) {
tz->policy.state |= TZ_STATE_PASSIVE;
}
/* Active? */
Pavel
--
I'm pavel@ucw.cz. "In my country we have almost anarchy and I don't care."
Panos Katsaloulis describing me w.r.t. patents at discuss@linmodems.org
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-07-12 21:02 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-07-11 20:02 Thermal extensions/cleanups Pavel Machek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®