* aic7899 problems
@ 2001-08-28 12:55 Gergely Madarasz
2001-08-28 14:58 ` Justin T. Gibbs
0 siblings, 1 reply; 3+ messages in thread
From: Gergely Madarasz @ 2001-08-28 12:55 UTC (permalink / raw)
To: linux-kernel
Hello,
the error message is like this:
scsi0:0:3:0: Attempting to queue an ABORT message
scsi0:0:3:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 8194
scsi0:0:3:0: Attempting to queue an ABORT message
scsi0:0:3:0: Cmd aborted from QINFIFO
aic7xxx_abort returns 8194
scsi0:0:3:0: Attempting to queue an ABORT message
(scsi0:A:3:0): Queuing a recovery SCB
scsi0:0:3:0: Device is disconnected, re-queuing SCB
Recovery code sleeping
Recovery code awake
Timer Expired
aic7xxx_abort returns 8195
lots of these messages. the same happens on scsi0:0:4:0, scsi0:0:5:0 and
scsi0:0:9:0, then I get ext2 and I/O errors. I have 4 of these machines
(ibm netfinity 5100), running for several weeks now as http proxies, and
sometimes they crash (3 from 4 have crashed so far at least once, this is
the first time I have logs from the beginning of the crash). The kernel is
stock 2.4.7. On another machine (netfinity 7100, aic7896) I couldn't boot
stock 2.4.9 because I got these messages right after the boot, the old aic
driver worked though. I'm puzzled because the 5100's worked perfectly for
almost a month. What should I try?
--
Madarasz Gergely gorgo@thunderchild.debian.net gorgo@linux.rulez.org
It's practically impossible to look at a penguin and feel angry.
Egy pingvinre gyakorlatilag lehetetlen haragosan nezni.
HuLUG: http://mlf.linux.rulez.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: aic7899 problems
2001-08-28 12:55 aic7899 problems Gergely Madarasz
@ 2001-08-28 14:58 ` Justin T. Gibbs
2001-08-28 15:01 ` Gergely Madarasz
0 siblings, 1 reply; 3+ messages in thread
From: Justin T. Gibbs @ 2001-08-28 14:58 UTC (permalink / raw)
To: Gergely Madarasz; +Cc: linux-kernel
>Hello,
>
>the error message is like this:
>
>scsi0:0:3:0: Attempting to queue an ABORT message
>scsi0:0:3:0: Cmd aborted from QINFIFO
>aic7xxx_abort returns 8194
>
>lots of these messages. the same happens on scsi0:0:4:0, scsi0:0:5:0 and
>scsi0:0:9:0, then I get ext2 and I/O errors. I have 4 of these machines
>(ibm netfinity 5100), running for several weeks now as http proxies, and
>sometimes they crash (3 from 4 have crashed so far at least once, this is
>the first time I have logs from the beginning of the crash). The kernel is
>stock 2.4.7. On another machine (netfinity 7100, aic7896) I couldn't boot
>stock 2.4.9 because I got these messages right after the boot, the old aic
>driver worked though. I'm puzzled because the 5100's worked perfectly for
>almost a month. What should I try?
Please boot a 2.4.9 system with "aic7xxx=verbose" in your lilo.conf
(aic7xxx driver statically linked into your kernel", or:
options aic7xxx aic7xxx=`"verbose"'
in your modules.conf (you'll have to recreate the initrd for it
to take effect) if you are loading a module. Use a serial console
to capture all messages from the start of boot through several
reported errors, and send it to me.
--
Justin
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: aic7899 problems
2001-08-28 14:58 ` Justin T. Gibbs
@ 2001-08-28 15:01 ` Gergely Madarasz
0 siblings, 0 replies; 3+ messages in thread
From: Gergely Madarasz @ 2001-08-28 15:01 UTC (permalink / raw)
To: Justin T. Gibbs; +Cc: linux-kernel
On Tue, Aug 28, 2001 at 08:58:28AM -0600, Justin T. Gibbs wrote:
> >Hello,
> >
> >the error message is like this:
> >
> >scsi0:0:3:0: Attempting to queue an ABORT message
> >scsi0:0:3:0: Cmd aborted from QINFIFO
> >aic7xxx_abort returns 8194
> >
> >lots of these messages. the same happens on scsi0:0:4:0, scsi0:0:5:0 and
> >scsi0:0:9:0, then I get ext2 and I/O errors. I have 4 of these machines
> >(ibm netfinity 5100), running for several weeks now as http proxies, and
> >sometimes they crash (3 from 4 have crashed so far at least once, this is
> >the first time I have logs from the beginning of the crash). The kernel is
> >stock 2.4.7. On another machine (netfinity 7100, aic7896) I couldn't boot
> >stock 2.4.9 because I got these messages right after the boot, the old aic
> >driver worked though. I'm puzzled because the 5100's worked perfectly for
> >almost a month. What should I try?
>
> Please boot a 2.4.9 system with "aic7xxx=verbose" in your lilo.conf
> (aic7xxx driver statically linked into your kernel", or:
>
> options aic7xxx aic7xxx=`"verbose"'
>
> in your modules.conf (you'll have to recreate the initrd for it
> to take effect) if you are loading a module. Use a serial console
> to capture all messages from the start of boot through several
> reported errors, and send it to me.
I'll try but days or weeks might pass before the next crash occurs.
Thanks.
--
Madarasz Gergely gorgo@thunderchild.debian.net gorgo@linux.rulez.org
It's practically impossible to look at a penguin and feel angry.
Egy pingvinre gyakorlatilag lehetetlen haragosan nezni.
HuLUG: http://mlf.linux.rulez.org/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2001-08-28 15:02 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-08-28 12:55 aic7899 problems Gergely Madarasz
2001-08-28 14:58 ` Justin T. Gibbs
2001-08-28 15:01 ` Gergely Madarasz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®