Re: 2.4.12-ac, lm-sensors broken ??

Re: 2.4.12-ac, lm-sensors broken ??

[f5ibh]

Hi,
>I use it quite nicely on 2.4.12-ac3   the latest i2c stack is already in the
>ac branch, you need not compile it on your own.  lm sensors version 2.6.1 and
>up is supported.  Just compile and install it.  (make;make install).

So I've done : get rid of the external i2c package, compiled the built-in i2c
stack. make and make install for the lm_sensors (2.6.1)...
... It does not work

in /proc/sys/dev/sensors/ I've only one empty file called chips

with 2.4.13, I've the following :

[root@debian-f5ibh] ~ # ls /proc/sys/dev/sensors/
chips
w83781d-isa-0290/

[root@debian-f5ibh] ~ # cat /proc/sys/dev/sensors/chips
256     w83781d-isa-0290

[root@debian-f5ibh] ~ # ls /proc/sys/dev/sensors/w83781d-isa-0290/
alarms  beep  fan1  fan2  fan3  fan_div  in0  in1  in2  in3  in4  in5  in6  rt1
rt2  rt3  temp1  temp2  temp3  vid

----------
Regards
		Jean-Luc

Re: 2.4.12-ac, lm-sensors broken ??

[f5ibh]

Hi,

>> So I've done : get rid of the external i2c package, compiled the built-in
>> i2c stack. make and make install for the lm_sensors (2.6.1)...
>> ... It does not work

>Nobody is having this problem but you.   have you tried insmoding the
>w83781d-isa-0290's module manually if it's not loaded? what version of
>lm-sensors are you using?

As I wrote, version is 2.6.1
w83781d-isa-0290, there is _no_ modules with this name !
The needed modules are i2c-core, i2c-isa, i2c-proc, w83781d. They are loaded.


...................

>Try turning off PnPBIOS support, which is new in -ac. That did it for
> me.
 
This is the clue. Without PnPBIOS enabled, the sensors work again. Thanks.


Alan, is there any known incompatiblity between PnPBIOS and the lm-sensors ?

----------
Regards
		Jean-Luc

2.4.12-ac, lm-sensors broken ??

[f5ibh]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 3253 bytes --]


Hi,

I use the lm-sensors on my system, it works fine with 2.2.20pre and 2.4.13 but
not with the ac tree, is there any reason for that ? I compile the i2c and
lm-sensors package as modules outside the kernel. The .config are the same for
both the kernels. The various modules (w83781d i2c-proc i2c-isa i2c-core) loads
fine with both systems.

with 2.4.12-ac5
---------------
[jean-luc@debian-f5ibh] ~ # uname -a
Linux debian-f5ibh 2.4.12-ac5 #1 lun oct 22 12:18:52 CEST 2001 i586 unknown

[jean-luc@debian-f5ibh] ~ # sensors
No sensors found!


system data :

If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
 
Linux debian-f5ibh 2.4.12-ac5 #1 lun oct 22 12:18:52 CEST 2001 i586 unknown
 
Gnu C                  2.95.4
Gnu make               3.79.1
binutils               2.11.90.0.27
util-linux             2.11l
modutils               2.4.10
e2fsprogs              tune2fs
reiserfsprogs          3.x.0j
PPP                    2.4.1
Linux C Library        2.2.4
Dynamic linker (ldd)   2.2.4
Procps                 2.0.7
Net-tools              1.60
Console-tools          0.2.3
Sh-utils               2.0.11
Modules Loaded         usb-ohci usbcore nfsd lockd sunrpc serial parport_pc lp parport autofs4 es1371 soundcore ac97_codec gameport w83781d i2c-proc i2c-isa i2c-core rtc unix

with 2.4.13
-----------
[jean-luc@debian-f5ibh] ~ # uname -a
Linux debian-f5ibh 2.4.13 #1 mer oct 24 13:22:17 CEST 2001 i586 unknown

[jean-luc@debian-f5ibh] ~ # sensors
w83781d-isa-0290
Adapter: ISA adapter
Algorithm: ISA algorithm
Vcore 1:   +2.24 V  (min =  +2.09 V, max =  +2.30 V)              
Vcore 2:   +2.24 V  (min =  +2.09 V, max =  +2.30 V)              
+3.5V:     +3.52 V  (min =  +3.32 V, max =  +3.66 V)              
+5V:       +4.86 V  (min =  +4.72 V, max =  +5.24 V)              
+12V:     +12.08 V  (min = +11.36 V, max = +12.58 V)              
-12V:     -11.82 V  (min = -11.33 V, max = -12.55 V)              
-5V:       -5.19 V  (min =  -4.74 V, max =  -5.24 V)              
CPU fan:  5400 RPM  (min = 3000 RPM, div = 2)                     
MB:       +39.0°C   (limit = +55°C, hysteresis = +55°C)        
Processor:+46.8°C   (limit = +65°C, hysteresis = +65°C)        
vid:      +3.50 V
alarms:   Chassis intrusion detection                             
beep_enable:
          Sound alarm disabled

system data :

If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
 
Linux debian-f5ibh 2.4.13 #1 mer oct 24 13:22:17 CEST 2001 i586 unknown
 
Gnu C                  2.95.4
Gnu make               3.79.1
binutils               2.11.90.0.27
util-linux             2.11l
modutils               2.4.10
e2fsprogs              tune2fs
reiserfsprogs          3.x.0j
PPP                    2.4.1
Linux C Library        2.2.4
Dynamic linker (ldd)   2.2.4
Procps                 2.0.7
Net-tools              1.60
Console-tools          0.2.3
Sh-utils               2.0.11
Modules Loaded         usb-ohci usbcore nfsd lockd sunrpc serial parport_pc lp parport autofs4 es1371 soundcore ac97_codec gameport w83781d i2c-proc i2c-isa i2c-core rtc unix

--- 
Regards
		Jean-Luc

Re: 2.4.12-ac, lm-sensors broken ??

[safemode]

On Wednesday 24 October 2001 08:38, f5ibh wrote:
> Hi,
>
> I use the lm-sensors on my system, it works fine with 2.2.20pre and 2.4.13
> but not with the ac tree, is there any reason for that ? I compile the i2c
> and lm-sensors package as modules outside the kernel. The .config are the
> same for both the kernels. The various modules (w83781d i2c-proc i2c-isa
> i2c-core) loads fine with both systems.

I use it quite nicely on 2.4.12-ac3   the latest i2c stack is already in the 
ac branch, you need not compile it on your own.  lm sensors version 2.6.1 and 
up is supported.  Just compile and install it.  (make;make install).