* Re: Included NIC module in newly compiled 2.4.130 finds only the first of 3 NICs 3c509
[not found] <6LdG7.12321$Re4.1880126@news20.bellglobal.com>
@ 2001-11-09 19:30 ` Bill Davidsen
0 siblings, 0 replies; only message in thread
From: Bill Davidsen @ 2001-11-09 19:30 UTC (permalink / raw)
To: tmills
In article <6LdG7.12321$Re4.1880126@news20.bellglobal.com> you write:
>
>All my three 3c509 cards work correctly under the original 2.2X kernel,
>using the modules (eth0,eth1 eth2)
>
>I downloaded the new kernel 2.4.130 and compiled it up.
>I said YES "*" to add my NIC driver (3c509.0)
>New kernel compiled fine and "teddy" boots up fine.
>
>However the new kernel (which has 3c509.0 support in it) only finds the
>first 3c509, it says "Delayed initialization"
>on eth1 and eth2.
>
>Why doesn't the new kernel with built in support find multiple instances of
>my card??
>
>I ran depmod -a and created the /lib/modules/2.4.13 folder...still nada....
>Any ideas????
Well, I would try the 3c59x driver for starters, built as a module.
Source code claims that it does the 3c905 and I believe I have it
running on some of my servers which are behind a firewall and can't
readily be checked.
--
bill davidsen <davidsen@tmr.com>
His first management concern is not solving the problem, but covering
his ass. If he lived in the middle ages he'd wear his codpiece backward.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-11-09 19:31 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <6LdG7.12321$Re4.1880126@news20.bellglobal.com>
2001-11-09 19:30 ` Included NIC module in newly compiled 2.4.130 finds only the first of 3 NICs 3c509 Bill Davidsen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®