* strange behaviour difference of scsi driver aha152x in 2.4.x and 2.2.x
@ 2002-02-26 17:30 Clemens Kirchgatterer
0 siblings, 0 replies; only message in thread
From: Clemens Kirchgatterer @ 2002-02-26 17:30 UTC (permalink / raw)
To: linux-kernel
i had a very hard time to get my old microtek scanmaker e3 scanner to
work on an ava1502 isa scsi controller under linux 2.4.17. host adapter
was allways detected correctly, but never the scanner. i tried to
change some timeout values within the kernel driver, but this wild
guessing didn't change anything. today i tired kernel 2.2.20. and it
seemed to work at first sight, as it reported the scanner at bootup, but
refused to start init with FATAL: kernel to old. (maybe a drm problem?)
anyway. i rebooted with 2.4.17 and this time the scanner was detected
without problems. this looks like the scsi bus has been initialized
slightly diffrent with the 2.2 kernel, what made it work under 2.4
afterwards.
is this something that can be fixed? or ain't it broken, anyway? i'm
willing to provide any information i can, if somebody wants to have a
look at this.
best regards ...
clemens
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-02-26 17:30 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-02-26 17:30 strange behaviour difference of scsi driver aha152x in 2.4.x and 2.2.x Clemens Kirchgatterer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®