Re: Re: Re: Re: installation of latest kernel on compaq notebook

Re: Re: Re: Re: installation of latest kernel on compaq notebook

[Enugala Venkata Ramana]

Hi Greg,
  I tried to configure my kernel. But when ever i try with kerel 
2.4.xx i always find the catc driver for the usb is not enabled. I 
cannot add that into my kernel at all.can u please let me know 
what needs to be done in this is situation and what is the kernal 
version from which it is been enabled.
Regards
Venku.

On Sat, 03 Aug 2002 Greg KH wrote :
>On Fri, Aug 02, 2002 at 06:38:03PM -0000, Enugala Venkata Ramana 
>wrote:
> > Hi Greg,
> > Can you please help me to find information on the installation 
>of
> > the driver and where can i find the driver. I tried some of 
>the
> > drivers on the net but when i trid to make the progra, i get a 
>lot
> > of errors.
>
>It's part of the main kernel tree.  Please read the Linux USB 
>Guide at
>http://www.linux-usb.org/ for how to set up USB drivers and your 
>system
>on Linux.
>
>I also suggest if you have any followup questions after reading 
>the
>guide, to read the FAQ and provide all of the information needed 
>there
>to the linux-usb-users mailing list.
>
>Good luck,
>
>greg k-h
>-
>To unsubscribe from this list: send the line "unsubscribe 
>linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at  
>http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at  http://www.tux.org/lkml/

__________________________________________________________
Give your Company an email address like
ravi @ ravi-exports.com.  Sign up for Rediffmail Pro today!
Know more. http://www.rediffmailpro.com/signup/

Re: installation of latest kernel on compaq notebook

[Brad Hards]

On Sat, 3 Aug 2002 14:12, Enugala Venkata Ramana wrote:
> Hi Greg,
>   I tried to configure my kernel. But when ever i try with kerel
> 2.4.xx i always find the catc driver for the usb is not enabled. I
> cannot add that into my kernel at all.can u please let me know
> what needs to be done in this is situation and what is the kernal
> version from which it is been enabled.
The use of "enabled" is confusing me. You aren't describing
the problem very well.

Do you mean that you cannot select in when you are doing
a "make menuconfig" or "make xconfig"?

Or do you mean that you have selected it, but it isn't being
compiled?

Or do you mean that you have it compiled, but the kernel
won't boot (or you can't modprobe the module)?

Or do you mean that it boots and the kernel shows
the catc driver (in /proc/bus/usb/drivers) but the 
device isn't being claimed (as shown in /proc/bus/usb/devices).

Exactly what are you trying to do, and what is happening?

Brad

-- 
http://conf.linux.org.au. 22-25Jan2003. Perth, Australia. Birds in Black.