* Re: Change in USB (HID?) from 2.4.18 to 2.4.19 breaks support for my Joystick
2002-08-12 6:39 Change in USB (HID?) from 2.4.18 to 2.4.19 breaks support for my Joystick Carlos Laviola
@ 2002-08-12 6:38 ` Brad Hards
0 siblings, 0 replies; 2+ messages in thread
From: Brad Hards @ 2002-08-12 6:38 UTC (permalink / raw)
To: Carlos Laviola, linux-kernel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Mon, 12 Aug 2002 16:39, Carlos Laviola wrote:
> Hi,
>
> I've recently bought a generic Playstation + Nintendo 64 joystick
> adapter that connects to USB ports. This joystick works fine on 2.4.18
> with the following modules only: usbcore, input, hid & usb-uhci. On
> 2.4.19, all of the mentioned modules load like in 2.4.18, but I get a
> "no such device" when I try to test the joystick with jstest. To be
> sure, I went to 2.4.20-pre1-ac1, and the joystick doesn't work with it
> too.
Did you copy the .config from your previous kernel to the new one, and NOT run
"make oldconfig"?
If so, consider yourself repremanded, and turn on the CONFIG_USB_HIDINPUT
option.
Brad
- --
http://conf.linux.org.au. 22-25Jan2003. Perth, Australia. Birds in Black.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE9V1fuW6pHgIdAuOMRAlvyAJoC49A/pXur5L0GqpJD5yZLQKIuTACdELQB
Glf3iJ/BXXXI8upkK+wCWpg=
=pWqJ
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 2+ messages in thread
* Change in USB (HID?) from 2.4.18 to 2.4.19 breaks support for my Joystick
@ 2002-08-12 6:39 Carlos Laviola
2002-08-12 6:38 ` Brad Hards
0 siblings, 1 reply; 2+ messages in thread
From: Carlos Laviola @ 2002-08-12 6:39 UTC (permalink / raw)
To: linux-kernel
Hi,
I've recently bought a generic Playstation + Nintendo 64 joystick
adapter that connects to USB ports. This joystick works fine on 2.4.18
with the following modules only: usbcore, input, hid & usb-uhci. On
2.4.19, all of the mentioned modules load like in 2.4.18, but I get a
"no such device" when I try to test the joystick with jstest. To be
sure, I went to 2.4.20-pre1-ac1, and the joystick doesn't work with it
too.
I'm including the output from lsusb -v below. If there's something else
I can do to help discover the problem, please tell me.
Here it is:
Bus 002 Device 001: ID 0000:0000 Virtual Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000 Virtual
idProduct 0x0000 Hub
bcdDevice 0.00
iManufacturer 0
iProduct 2 USB UHCI Root Hub
iSerial 1 d000
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 8
bInterval 255
Language IDs: (length=4)
0000 (null)((null))
Bus 001 Device 001: ID 0000:0000 Virtual Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000 Virtual
idProduct 0x0000 Hub
bcdDevice 0.00
iManufacturer 0
iProduct 2 USB UHCI Root Hub
iSerial 1 d400
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 8
bInterval 255
Language IDs: (length=4)
0000 (null)((null))
Bus 001 Device 002: ID 6666:0667 Eclectic VG SmartJoy PSX
Language IDs: none (invalid length string descriptor bf; len=0)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0 Interface
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x6666 Eclectic VG
idProduct 0x0667 SmartJoy PSX
bcdDevice 2.88
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 82
cannot get report descriptor
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 6
bInterval 10
Language IDs: none (invalid length string descriptor bf; len=0)
-end-
--
Carlos Laviola <carlos@laviola.org>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-08-12 6:40 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-08-12 6:39 Change in USB (HID?) from 2.4.18 to 2.4.19 breaks support for my Joystick Carlos Laviola
2002-08-12 6:38 ` Brad Hards
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®