* Re: [BK PATCH] PCI Hotplug changes for 2.4.20-pre7
2002-09-13 18:28 [BK PATCH] PCI Hotplug changes for 2.4.20-pre7 Greg KH
@ 2002-09-13 18:29 ` Greg KH
2002-09-13 18:29 ` Greg KH
0 siblings, 1 reply; 6+ messages in thread
From: Greg KH @ 2002-09-13 18:29 UTC (permalink / raw)
To: marcelo; +Cc: linux-kernel, pcihpd-discuss
# This is a BitKeeper generated patch for the following project:
# Project Name: Linux kernel tree
# This patch format is intended for GNU patch command version 2.5 or higher.
# This patch includes the following deltas:
# ChangeSet 1.660 -> 1.661
# drivers/hotplug/ibmphp_hpc.c 1.2 -> 1.3
# drivers/hotplug/ibmphp_ebda.c 1.2 -> 1.3
# drivers/hotplug/ibmphp_pci.c 1.1 -> 1.2
# drivers/hotplug/ibmphp.h 1.2 -> 1.3
# drivers/hotplug/ibmphp_res.c 1.1 -> 1.2
# drivers/hotplug/ibmphp_core.c 1.3 -> 1.4
#
# The following is the BitKeeper ChangeSet Log
# --------------------------------------------
# 02/09/13 zubarev@us.ibm.com 1.661
# [PATCH] IBM PCI Hotplug driver update
#
# - fix polling logic
# - add ability to write [chassis/rxe]#slot# instead of just slot#
# --------------------------------------------
#
diff -Nru a/drivers/hotplug/ibmphp.h b/drivers/hotplug/ibmphp.h
--- a/drivers/hotplug/ibmphp.h Fri Sep 13 10:57:25 2002
+++ b/drivers/hotplug/ibmphp.h Fri Sep 13 10:57:25 2002
@@ -39,7 +39,8 @@
#else
#define MY_NAME THIS_MODULE->name
#endif
-#define debug(fmt, arg...) do { if (ibmphp_debug) printk(KERN_DEBUG "%s: " fmt , MY_NAME , ## arg); } while (0)
+#define debug(fmt, arg...) do { if (ibmphp_debug == 1) printk(KERN_DEBUG "%s: " fmt , MY_NAME , ## arg); } while (0)
+#define debug_pci(fmt, arg...) do { if (ibmphp_debug) printk(KERN_DEBUG "%s: " fmt , MY_NAME , ## arg); } while (0)
#define err(format, arg...) printk(KERN_ERR "%s: " format , MY_NAME , ## arg)
#define info(format, arg...) printk(KERN_INFO "%s: " format , MY_NAME , ## arg)
#define warn(format, arg...) printk(KERN_WARNING "%s: " format , MY_NAME , ## arg)
@@ -121,6 +122,7 @@
u8 port1_port_connect;
u8 port2_node_connect;
u8 port2_port_connect;
+ u8 chassis_num;
// struct list_head scal_detail_list;
};
@@ -139,9 +141,27 @@
u8 port1_port_connect;
u8 first_slot_num;
u8 status;
-// struct list_head rio_detail_list;
+ u8 wpindex;
+ u8 chassis_num;
+ struct list_head rio_detail_list;
};
+struct opt_rio {
+ u8 rio_type;
+ u8 chassis_num;
+ u8 first_slot_num;
+ u8 middle_num;
+ struct list_head opt_rio_list;
+};
+
+struct opt_rio_lo {
+ u8 rio_type;
+ u8 chassis_num;
+ u8 first_slot_num;
+ u8 middle_num;
+ u8 pack_count;
+ struct list_head opt_rio_lo_list;
+};
/****************************************************************
* HPC DESCRIPTOR NODE *
@@ -153,7 +173,6 @@
short phys_addr;
// struct list_head ebda_hpc_list;
};
-
/*****************************************************************
* IN HPC DATA STRUCTURE, THE ASSOCIATED SLOT AND BUS *
* STRUCTURE *
@@ -195,6 +214,9 @@
u8 i2c_addr;
};
+#define HPC_DEVICE_ID 0x0246
+#define HPC_SUBSYSTEM_ID 0x0247
+#define HPC_PCI_OFFSET 0x40
/*************************************************************************
* RSTC DESCRIPTOR NODE *
*************************************************************************/
@@ -215,8 +237,9 @@
u8 rsrc_type;
u8 bus_num;
u8 dev_fun;
- ulong start_addr;
- ulong end_addr;
+ u32 start_addr;
+ u32 end_addr;
+ u8 marked; /* for NVRAM */
struct list_head ebda_pci_rsrc_list;
};
@@ -248,7 +271,7 @@
***********************************************************/
extern struct list_head ibmphp_ebda_pci_rsrc_head;
extern struct list_head ibmphp_slot_head;
-
+extern struct list_head ibmphp_res_head;
/***********************************************************
* FUNCTION PROTOTYPES *
***********************************************************/
@@ -263,6 +286,7 @@
extern struct bus_info *ibmphp_find_same_bus_num (u32);
extern int ibmphp_get_bus_index (u8);
extern u16 ibmphp_get_total_controllers (void);
+extern int ibmphp_register_pci (void);
/* passed parameters */
#define MEM 0
@@ -739,6 +763,7 @@
extern int ibmphp_update_slot_info (struct slot *); /* This function is called from HPC, so we need it to not be be static */
extern int ibmphp_configure_card (struct pci_func *, u8);
extern int ibmphp_unconfigure_card (struct slot **, int);
+extern void ibmphp_increase_count (void);
extern struct hotplug_slot_ops ibmphp_hotplug_slot_ops;
static inline void long_delay (int delay)
diff -Nru a/drivers/hotplug/ibmphp_core.c b/drivers/hotplug/ibmphp_core.c
--- a/drivers/hotplug/ibmphp_core.c Fri Sep 13 10:57:25 2002
+++ b/drivers/hotplug/ibmphp_core.c Fri Sep 13 10:57:25 2002
@@ -44,7 +44,7 @@
#define get_ctrl_revision(sl, rev) ibmphp_hpc_readslot (sl, READ_REVLEVEL, rev)
#define get_hpc_options(sl, opt) ibmphp_hpc_readslot (sl, READ_HPCOPTIONS, opt)
-#define DRIVER_VERSION "0.3"
+#define DRIVER_VERSION "0.6"
#define DRIVER_DESC "IBM Hot Plug PCI Controller Driver"
int ibmphp_debug;
@@ -88,6 +88,8 @@
slot_cur->bus_on->current_speed = CURRENT_BUS_SPEED (slot_cur->busstatus);
if (READ_BUS_MODE (slot_cur->ctrl))
slot_cur->bus_on->current_bus_mode = CURRENT_BUS_MODE (slot_cur->busstatus);
+ else
+ slot_cur->bus_on->current_bus_mode = 0xFF;
debug ("busstatus = %x, bus_speed = %x, bus_mode = %x\n", slot_cur->busstatus, slot_cur->bus_on->current_speed, slot_cur->bus_on->current_bus_mode);
@@ -108,11 +110,15 @@
static int get_max_slots (void)
{
+ struct slot * slot_cur;
struct list_head * tmp;
- int slot_count = 0;
+ u8 slot_count = 0;
- list_for_each (tmp, &ibmphp_slot_head)
- ++slot_count;
+ list_for_each (tmp, &ibmphp_slot_head) {
+ slot_cur = list_entry (tmp, struct slot, ibm_slot_list);
+ /* sometimes the hot-pluggable slots start with 4 (not always from 1 */
+ slot_count = max (slot_count, slot_cur->number);
+ }
return slot_count;
}
@@ -330,7 +336,7 @@
memcpy ((void *) &myslot, (void *) pslot, sizeof (struct slot));
hpcrc = ibmphp_hpc_readslot (pslot, READ_SLOTSTATUS, &(myslot.status));
if (!hpcrc) {
- *value = SLOT_POWER (myslot.status);
+ *value = SLOT_PWRGD (myslot.status);
rc = 0;
}
}
@@ -394,15 +400,22 @@
if (pslot) {
rc = 0;
mode = pslot->supported_bus_mode;
- *value = pslot->supported_speed;
- *value &= 0x0f;
-
- if (mode == BUS_MODE_PCIX)
- *value |= 0x80;
- else if (mode == BUS_MODE_PCI)
- *value |= 0x40;
- else
- *value |= 0x20;
+ *value = pslot->supported_speed;
+ switch (*value) {
+ case BUS_SPEED_33:
+ break;
+ case BUS_SPEED_66:
+ if (mode == BUS_MODE_PCIX)
+ *value += 0x01;
+ break;
+ case BUS_SPEED_100:
+ case BUS_SPEED_133:
+ *value = pslot->supported_speed + 0x01;
+ break;
+ default:
+*/ /* Note (will need to change): there would be soon 256, 512 also */
+/* rc = -ENODEV;
+ }
}
} else
rc = -ENODEV;
@@ -429,14 +442,25 @@
if (!rc) {
mode = pslot->bus_on->current_bus_mode;
*value = pslot->bus_on->current_speed;
- *value &= 0x0f;
-
- if (mode == BUS_MODE_PCIX)
- *value |= 0x80;
- else if (mode == BUS_MODE_PCI)
- *value |= 0x40;
- else
- *value |= 0x20;
+ switch (*value) {
+ case BUS_SPEED_33:
+ break;
+ case BUS_SPEED_66:
+ if (mode == BUS_MODE_PCIX)
+ *value += 0x01;
+ else if (mode == BUS_MODE_PCI)
+ ;
+ else
+ *value = PCI_SPEED_UNKNOWN;
+ break;
+ case BUS_SPEED_100:
+ case BUS_SPEED_133:
+ *value += 0x01;
+ break;
+ default:
+*/ /* Note of change: there would also be 256, 512 soon */
+/* rc = -ENODEV;
+ }
}
}
} else
@@ -454,7 +478,7 @@
int hpcrc = 0;
struct slot myslot;
- debug ("get_max_adapter_speed - Entry hotplug_slot[%lx] pvalue[%lx]\n", (ulong)hotplug_slot, (ulong) value);
+ debug ("get_max_adapter_speed_1 - Entry hotplug_slot[%lx] pvalue[%lx]\n", (ulong)hotplug_slot, (ulong) value);
if (flag)
ibmphp_lock_operations ();
@@ -485,17 +509,16 @@
if (flag)
ibmphp_unlock_operations ();
- debug ("get_adapter_present - Exit rc[%d] hpcrc[%x] value[%x]\n", rc, hpcrc, *value);
+ debug ("get_max_adapter_speed_1 - Exit rc[%d] hpcrc[%x] value[%x]\n", rc, hpcrc, *value);
return rc;
}
-static int get_card_bus_names (struct hotplug_slot *hotplug_slot, char * value)
+static int get_bus_name (struct hotplug_slot *hotplug_slot, char * value)
{
int rc = -ENODEV;
struct slot *pslot = NULL;
- struct pci_dev * dev = NULL;
- debug ("get_card_bus_names - Entry hotplug_slot[%lx] \n", (ulong)hotplug_slot);
+ debug ("get_bus_name - Entry hotplug_slot[%lx] \n", (ulong)hotplug_slot);
ibmphp_lock_operations ();
@@ -503,26 +526,17 @@
pslot = (struct slot *) hotplug_slot->private;
if (pslot) {
rc = 0;
- if (pslot->func)
- dev = pslot->func->dev;
- else
- dev = pci_find_slot (pslot->bus, (pslot->device << 3) | (0x00 & 0x7));
- if (dev)
- snprintf (value, 100, "Bus %d : %s", pslot->bus,dev->name);
- else
- snprintf (value, 100, "Bus %d", pslot->bus);
-
-
+ snprintf (value, 100, "Bus %x", pslot->bus);
}
} else
rc = -ENODEV;
ibmphp_unlock_operations ();
- debug ("get_card_bus_names - Exit rc[%d] value[%x]\n", rc, *value);
+ debug ("get_bus_name - Exit rc[%d] value[%x]\n", rc, *value);
return rc;
}
-
*/
+
/*******************************************************************************
* This routine will initialize the ops data structure used in the validate
* function. It will also power off empty slots that are powered on since BIOS
@@ -531,12 +545,14 @@
static int init_ops (void)
{
struct slot *slot_cur;
+ struct list_head *tmp;
int retval;
- int j;
int rc;
+ int j;
for (j = 0; j < MAX_OPS; j++) {
ops[j] = (int *) kmalloc ((max_slots + 1) * sizeof (int), GFP_KERNEL);
+ memset (ops[j], 0, (max_slots + 1) * sizeof (int));
if (!ops[j]) {
err ("out of system memory \n");
return -ENOMEM;
@@ -547,12 +563,13 @@
ops[REMOVE][0] = 0;
ops[DETAIL][0] = 0;
- for (j = 1; j <= max_slots; j++) {
+ list_for_each (tmp, &ibmphp_slot_head) {
+ slot_cur = list_entry (tmp, struct slot, ibm_slot_list);
- slot_cur = ibmphp_get_slot_from_physical_num (j);
+ if (!slot_cur)
+ return -ENODEV;
debug ("BEFORE GETTING SLOT STATUS, slot # %x\n", slot_cur->number);
-
if (slot_cur->ctrl->revision == 0xFF)
if (get_ctrl_revision (slot_cur, &slot_cur->ctrl->revision))
return -1;
@@ -572,21 +589,21 @@
debug ("status = %x, ext_status = %x\n", slot_cur->status, slot_cur->ext_status);
debug ("SLOT_POWER = %x, SLOT_PRESENT = %x, SLOT_LATCH = %x\n", SLOT_POWER (slot_cur->status), SLOT_PRESENT (slot_cur->status), SLOT_LATCH (slot_cur->status));
- if (!(SLOT_POWER (slot_cur->status)) && (SLOT_PRESENT (slot_cur->status)) && !(SLOT_LATCH (slot_cur->status)))
+ if (!(SLOT_PWRGD (slot_cur->status)) && (SLOT_PRESENT (slot_cur->status)) && !(SLOT_LATCH (slot_cur->status)))
/* No power, adapter, and latch closed */
- ops[ADD][j] = 1;
+ ops[ADD][slot_cur->number] = 1;
else
- ops[ADD][j] = 0;
+ ops[ADD][slot_cur->number] = 0;
- ops[DETAIL][j] = 1;
+ ops[DETAIL][slot_cur->number] = 1;
- if ((SLOT_POWER (slot_cur->status)) && (SLOT_PRESENT (slot_cur->status)) && !(SLOT_LATCH (slot_cur->status)))
+ if ((SLOT_PWRGD (slot_cur->status)) && (SLOT_PRESENT (slot_cur->status)) && !(SLOT_LATCH (slot_cur->status)))
/*Power,adapter,latch closed */
- ops[REMOVE][j] = 1;
+ ops[REMOVE][slot_cur->number] = 1;
else
- ops[REMOVE][j] = 0;
+ ops[REMOVE][slot_cur->number] = 0;
- if ((SLOT_POWER (slot_cur->status)) && !(SLOT_PRESENT (slot_cur->status)) && !(SLOT_LATCH (slot_cur->status))) {
+ if ((SLOT_PWRGD (slot_cur->status)) && !(SLOT_PRESENT (slot_cur->status)) && !(SLOT_LATCH (slot_cur->status))) {
debug ("BEFORE POWER OFF COMMAND\n");
rc = power_off (slot_cur);
if (rc)
@@ -624,7 +641,7 @@
if (retval)
return retval;
- if (!(SLOT_POWER (slot_cur->status)) && (SLOT_PRESENT (slot_cur->status))
+ if (!(SLOT_PWRGD (slot_cur->status)) && (SLOT_PRESENT (slot_cur->status))
&& !(SLOT_LATCH (slot_cur->status)))
ops[ADD][number] = 1;
else
@@ -632,7 +649,7 @@
ops[DETAIL][number] = 1;
- if ((SLOT_POWER (slot_cur->status)) && (SLOT_PRESENT (slot_cur->status))
+ if ((SLOT_PWRGD (slot_cur->status)) && (SLOT_PRESENT (slot_cur->status))
&& !(SLOT_LATCH (slot_cur->status)))
ops[REMOVE][number] = 1;
else
@@ -678,7 +695,7 @@
}
snprintf (buffer, 10, "%d", slot_cur->number);
- info->power_status = SLOT_POWER (slot_cur->status);
+ info->power_status = SLOT_PWRGD (slot_cur->status);
info->attention_status = SLOT_ATTN (slot_cur->status, slot_cur->ext_status);
info->latch_status = SLOT_LATCH (slot_cur->status);
if (!SLOT_PRESENT (slot_cur->status)) {
@@ -688,8 +705,8 @@
info->adapter_status = 1;
// get_max_adapter_speed_1 (slot_cur->hotplug_slot, &info->max_adapter_speed_status, 0);
}
-/*
- bus_speed = slot_cur->bus_on->current_speed;
+ /* !!!!!!!!!TO DO: THIS NEEDS TO CHANGE!!!!!!!!!!!!! */
+/* bus_speed = slot_cur->bus_on->current_speed;
bus_speed &= 0x0f;
if (slot_cur->bus_on->current_bus_mode == BUS_MODE_PCIX)
@@ -701,7 +718,7 @@
info->cur_bus_speed_status = bus_speed;
info->max_bus_speed_status = slot_cur->hotplug_slot->info->max_bus_speed_status;
- // To do: card_bus_names
+ // To do: bus_names
*/
rc = pci_hp_change_slot_info (buffer, info);
kfree (info);
@@ -775,8 +792,10 @@
struct list_head * tmp;
struct list_head * next;
- list_for_each_safe (tmp, next, &ibmphp_slot_head) {
+ debug ("%s -- enter\n", __FUNCTION__);
+ list_for_each_safe (tmp, next, &ibmphp_slot_head) {
+
slot_cur = list_entry (tmp, struct slot, ibm_slot_list);
pci_hp_deregister (slot_cur->hotplug_slot);
@@ -795,7 +814,9 @@
ibmphp_unconfigure_card (&slot_cur, -1); /* we don't want to actually remove the resources, since free_resources will do just that */
kfree (slot_cur);
+ slot_cur = NULL;
}
+ debug ("%s -- exit\n", __FUNCTION__);
}
static int ibm_is_pci_dev_in_use (struct pci_dev *dev)
@@ -851,7 +872,7 @@
if (temp_func)
temp_func->dev = NULL;
else
- err ("No pci_func representation for bus, devfn = %d, %x\n", dev->bus->number, dev->devfn);
+ debug ("No pci_func representation for bus, devfn = %d, %x\n", dev->bus->number, dev->devfn);
return 0;
}
@@ -965,6 +986,34 @@
visit_pci_dev: configure_visit_pci_dev,
};
+
+/*
+ * The following function is to fix kernel bug regarding
+ * getting bus entries, here we manually add those primary
+ * bus entries to kernel bus structure whenever apply
+ */
+
+static u8 bus_structure_fixup (u8 busno)
+{
+ struct pci_bus bus_t;
+ struct pci_dev dev_t;
+ u16 l;
+
+ if (!find_bus (busno) || !(ibmphp_find_same_bus_num (busno)))
+ return 1;
+ bus_t.number = busno;
+ bus_t.ops = ibmphp_pci_root_ops;
+ dev_t.bus = &bus_t;
+ for (dev_t.devfn=0; dev_t.devfn<256; dev_t.devfn += 8) {
+ if (!pci_read_config_word (&dev_t, PCI_VENDOR_ID, &l) && l != 0x0000 && l != 0xffff) {
+ debug ("%s - Inside bus_struture_fixup() \n", __FUNCTION__);
+ pci_scan_bus (busno, ibmphp_pci_root_ops, NULL);
+ break;
+ }
+ }
+ return 0;
+}
+
static int ibm_configure_device (struct pci_func *func)
{
unsigned char bus;
@@ -972,6 +1021,7 @@
struct pci_bus *child;
struct pci_dev *temp;
int rc = 0;
+ int flag = 0; /* this is to make sure we don't double scan the bus, for bridged devices primarily */
struct pci_dev_wrapped wrapped_dev;
struct pci_bus_wrapped wrapped_bus;
@@ -980,6 +1030,8 @@
memset (&wrapped_bus, 0, sizeof (struct pci_bus_wrapped));
memset (&dev0, 0, sizeof (struct pci_dev));
+ if (!(bus_structure_fixup (func->busno)))
+ flag = 1;
if (func->dev == NULL)
func->dev = pci_find_slot (func->busno, (func->device << 3) | (func->function & 0x7));
@@ -995,7 +1047,7 @@
return 0;
}
}
- if (func->dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ if (!(flag) && (func->dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)) {
pci_read_config_byte (func->dev, PCI_SECONDARY_BUS, &bus);
child = (struct pci_bus *) pci_add_new_bus (func->dev->bus, (func->dev), bus);
pci_do_scan_bus (child);
@@ -1028,7 +1080,7 @@
rc = slot_update (&tmp_slot);
if (rc)
return 0;
- if (SLOT_PRESENT (tmp_slot->status) && SLOT_POWER (tmp_slot->status))
+ if (SLOT_PRESENT (tmp_slot->status) && SLOT_PWRGD (tmp_slot->status))
return 0;
i++;
}
@@ -1046,6 +1098,9 @@
int rc;
u8 speed;
u8 cmd = 0x0;
+ const struct list_head *tmp;
+ struct pci_dev * dev;
+ int retval;
debug ("%s - entry slot # %d \n", __FUNCTION__, slot_cur->number);
if (SET_BUS_STATUS (slot_cur->ctrl) && is_bus_empty (slot_cur)) {
@@ -1091,6 +1146,14 @@
cmd = HPC_BUS_100PCIXMODE;
break;
case BUS_SPEED_133:
+ /* This is to take care of the bug in CIOBX chip*/
+ list_for_each (tmp, &pci_devices) {
+ dev = (struct pci_dev *) pci_dev_g (tmp);
+ if (dev) {
+ if ((dev->vendor == 0x1166) && (dev->device == 0x0101))
+ ibmphp_hpc_writeslot (slot_cur, HPC_BUS_100PCIXMODE);
+ }
+ }
cmd = HPC_BUS_133PCIXMODE;
break;
default:
@@ -1103,9 +1166,17 @@
return -ENODEV;
}
debug ("setting bus speed for slot %d, cmd %x\n", slot_cur->number, cmd);
- ibmphp_hpc_writeslot (slot_cur, cmd);
+ retval = ibmphp_hpc_writeslot (slot_cur, cmd);
+ if (retval) {
+ err ("setting bus speed failed\n");
+ return retval;
+ }
+ if (CTLR_RESULT (slot_cur->ctrl->status)) {
+ err ("command not completed successfully in set_bus \n");
+ return -EIO;
+ }
}
- /* This is for x400, once Brandon fixes the firmware,
+ /* This is for x440, once Brandon fixes the firmware,
will not need this delay */
long_delay (1 * HZ);
debug ("%s -Exit \n", __FUNCTION__);
@@ -1128,7 +1199,7 @@
for (i = slot_cur->bus_on->slot_min; i <= slot_cur->bus_on->slot_max; i++) {
tmp_slot = ibmphp_get_slot_from_physical_num (i);
- if ((SLOT_POWER (tmp_slot->status)) && !(SLOT_CONNECT (tmp_slot->status)))
+ if ((SLOT_PWRGD (tmp_slot->status)) && !(SLOT_CONNECT (tmp_slot->status)))
count++;
}
get_cur_bus_info (&slot_cur);
@@ -1384,11 +1455,15 @@
debug ("DISABLING SLOT... \n");
- if (slot_cur == NULL)
+ if (slot_cur == NULL) {
+ ibmphp_unlock_operations ();
return -ENODEV;
+ }
- if (slot_cur->ctrl == NULL)
+ if (slot_cur->ctrl == NULL) {
+ ibmphp_unlock_operations ();
return -ENODEV;
+ }
flag = slot_cur->flag; /* to see if got here from polling */
@@ -1463,7 +1538,8 @@
return -EFAULT;
}
- ibmphp_update_slot_info (slot_cur);
+ if (flag)
+ ibmphp_update_slot_info (slot_cur);
ibmphp_unlock_operations ();
return -EFAULT;
}
@@ -1493,6 +1569,14 @@
return rc;
}
+/* This routine is for NVRAM module to increase the count so we can rmmod
+ * the ibmphp module
+ */
+void ibmphp_increase_count (void)
+{
+ MOD_INC_USE_COUNT;
+}
+
struct hotplug_slot_ops ibmphp_hotplug_slot_ops = {
owner: THIS_MODULE,
set_attention_status: set_attention_status,
@@ -1506,7 +1590,7 @@
/* get_max_bus_speed_status: get_max_bus_speed,
get_max_adapter_speed_status: get_max_adapter_speed,
get_cur_bus_speed_status: get_cur_bus_speed,
- get_card_bus_names_status: get_card_bus_names,
+ get_bus_name_status: get_bus_name,
*/
};
@@ -1559,7 +1643,7 @@
debug ("AFTER Resource & EBDA INITIALIZATIONS\n");
max_slots = get_max_slots ();
-
+
if (init_ops ()) {
ibmphp_unload ();
return -ENODEV;
@@ -1570,11 +1654,9 @@
return -ENODEV;
}
- /* lock ourselves into memory with a module count of -1
- * so that no one can unload us. */
+ /* if no NVRAM module selected, lock ourselves into memory with a
+ * module count of -1 so that no one can unload us. */
MOD_DEC_USE_COUNT;
-
-
return 0;
}
diff -Nru a/drivers/hotplug/ibmphp_ebda.c b/drivers/hotplug/ibmphp_ebda.c
--- a/drivers/hotplug/ibmphp_ebda.c Fri Sep 13 10:57:25 2002
+++ b/drivers/hotplug/ibmphp_ebda.c Fri Sep 13 10:57:25 2002
@@ -55,11 +55,17 @@
/* Local variables */
static struct ebda_hpc_list *hpc_list_ptr;
static struct ebda_rsrc_list *rsrc_list_ptr;
-static struct rio_table_hdr *rio_table_ptr;
+static struct rio_table_hdr *rio_table_ptr = NULL;
static LIST_HEAD (ebda_hpc_head);
static LIST_HEAD (bus_info_head);
+static LIST_HEAD (rio_vg_head);
+static LIST_HEAD (rio_lo_head);
+static LIST_HEAD (opt_vg_head);
+static LIST_HEAD (opt_lo_head);
static void *io_mem;
+char *chassis_str, *rxe_str, *str;
+
/* Local functions */
static int ebda_rsrc_controller (void);
static int ebda_rsrc_rsrc (void);
@@ -172,6 +178,40 @@
}
}
+static void print_lo_info (void)
+{
+ struct rio_detail *ptr;
+ struct list_head *ptr1;
+ debug ("print_lo_info ---- \n");
+ list_for_each (ptr1, &rio_lo_head) {
+ ptr = list_entry (ptr1, struct rio_detail, rio_detail_list);
+ debug ("%s - rio_node_id = %x\n", __FUNCTION__, ptr->rio_node_id);
+ debug ("%s - rio_type = %x\n", __FUNCTION__, ptr->rio_type);
+ debug ("%s - owner_id = %x\n", __FUNCTION__, ptr->owner_id);
+ debug ("%s - first_slot_num = %x\n", __FUNCTION__, ptr->first_slot_num);
+ debug ("%s - wpindex = %x\n", __FUNCTION__, ptr->wpindex);
+ debug ("%s - chassis_num = %x\n", __FUNCTION__, ptr->chassis_num);
+
+ }
+}
+
+static void print_vg_info (void)
+{
+ struct rio_detail *ptr;
+ struct list_head *ptr1;
+ debug ("print_vg_info --- \n");
+ list_for_each (ptr1, &rio_vg_head) {
+ ptr = list_entry (ptr1, struct rio_detail, rio_detail_list);
+ debug ("%s - rio_node_id = %x\n", __FUNCTION__, ptr->rio_node_id);
+ debug ("%s - rio_type = %x\n", __FUNCTION__, ptr->rio_type);
+ debug ("%s - owner_id = %x\n", __FUNCTION__, ptr->owner_id);
+ debug ("%s - first_slot_num = %x\n", __FUNCTION__, ptr->first_slot_num);
+ debug ("%s - wpindex = %x\n", __FUNCTION__, ptr->wpindex);
+ debug ("%s - chassis_num = %x\n", __FUNCTION__, ptr->chassis_num);
+
+ }
+}
+
static void print_ebda_pci_rsrc (void)
{
struct ebda_pci_rsrc *ptr;
@@ -179,11 +219,36 @@
list_for_each (ptr1, &ibmphp_ebda_pci_rsrc_head) {
ptr = list_entry (ptr1, struct ebda_pci_rsrc, ebda_pci_rsrc_list);
- debug ("%s - rsrc type: %x bus#: %x dev_func: %x start addr: %lx end addr: %lx\n",
+ debug ("%s - rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n",
__FUNCTION__, ptr->rsrc_type ,ptr->bus_num, ptr->dev_fun,ptr->start_addr, ptr->end_addr);
}
}
+static void print_ibm_slot (void)
+{
+ struct slot *ptr;
+ struct list_head *ptr1;
+
+ list_for_each (ptr1, &ibmphp_slot_head) {
+ ptr = list_entry (ptr1, struct slot, ibm_slot_list);
+ debug ("%s - slot_number: %x \n", __FUNCTION__, ptr->number);
+ }
+}
+
+static void print_opt_vg (void)
+{
+ struct opt_rio *ptr;
+ struct list_head *ptr1;
+ debug ("print_opt_vg --- \n");
+ list_for_each (ptr1, &opt_vg_head) {
+ ptr = list_entry (ptr1, struct opt_rio, opt_rio_list);
+ debug ("%s - rio_type %x \n", __FUNCTION__, ptr->rio_type);
+ debug ("%s - chassis_num: %x \n", __FUNCTION__, ptr->chassis_num);
+ debug ("%s - first_slot_num: %x \n", __FUNCTION__, ptr->first_slot_num);
+ debug ("%s - middle_num: %x \n", __FUNCTION__, ptr->middle_num);
+ }
+}
+
static void print_ebda_hpc (void)
{
struct controller *hpc_ptr;
@@ -220,6 +285,7 @@
break;
case 2:
+ case 4:
debug ("%s - wpegbbar: %lx\n", __FUNCTION__, hpc_ptr->u.wpeg_ctlr.wpegbbar);
debug ("%s - i2c_addr: %x\n", __FUNCTION__, hpc_ptr->u.wpeg_ctlr.i2c_addr);
debug ("%s - irq: %x\n", __FUNCTION__, hpc_ptr->irq);
@@ -356,31 +422,380 @@
rio_complete = 1;
}
+ }
- if (hs_complete && rio_complete) {
- rc = ebda_rsrc_controller ();
- if (rc) {
- iounmap(io_mem);
- return rc;
- }
- rc = ebda_rsrc_rsrc ();
- if (rc) {
- iounmap(io_mem);
- return rc;
- }
+ if (!hs_complete && !rio_complete) {
+ iounmap (io_mem);
+ return -ENODEV;
+ }
+
+ if (rio_table_ptr) {
+ if (rio_complete == 1 && rio_table_ptr->ver_num == 3) {
rc = ebda_rio_table ();
if (rc) {
- iounmap(io_mem);
+ iounmap (io_mem);
return rc;
- }
- iounmap (io_mem);
- return 0;
+ }
}
}
+ rc = ebda_rsrc_controller ();
+ if (rc) {
+ iounmap (io_mem);
+ return rc;
+ }
+
+ rc = ebda_rsrc_rsrc ();
+ if (rc) {
+ iounmap (io_mem);
+ return rc;
+ }
+
iounmap (io_mem);
- return -ENODEV;
+ return 0;
+}
+
+/*
+ * map info of scalability details and rio details from physical address
+ */
+static int ebda_rio_table (void)
+{
+ u16 offset;
+ u8 i;
+ struct rio_detail *rio_detail_ptr;
+
+ offset = rio_table_ptr->offset;
+ offset += 12 * rio_table_ptr->scal_count;
+
+ // we do concern about rio details
+ for (i = 0; i < rio_table_ptr->riodev_count; i++) {
+ rio_detail_ptr = kmalloc (sizeof (struct rio_detail), GFP_KERNEL);
+ if (!rio_detail_ptr)
+ return -ENOMEM;
+ memset (rio_detail_ptr, 0, sizeof (struct rio_detail));
+ rio_detail_ptr->rio_node_id = readb (io_mem + offset);
+ rio_detail_ptr->bbar = readl (io_mem + offset + 1);
+ rio_detail_ptr->rio_type = readb (io_mem + offset + 5);
+ rio_detail_ptr->owner_id = readb (io_mem + offset + 6);
+ rio_detail_ptr->port0_node_connect = readb (io_mem + offset + 7);
+ rio_detail_ptr->port0_port_connect = readb (io_mem + offset + 8);
+ rio_detail_ptr->port1_node_connect = readb (io_mem + offset + 9);
+ rio_detail_ptr->port1_port_connect = readb (io_mem + offset + 10);
+ rio_detail_ptr->first_slot_num = readb (io_mem + offset + 11);
+ rio_detail_ptr->status = readb (io_mem + offset + 12);
+ rio_detail_ptr->wpindex = readb (io_mem + offset + 13);
+ rio_detail_ptr->chassis_num = readb (io_mem + offset + 14);
+// debug ("rio_node_id: %x\nbbar: %x\nrio_type: %x\nowner_id: %x\nport0_node: %x\nport0_port: %x\nport1_node: %x\nport1_port: %x\nfirst_slot_num: %x\nstatus: %x\n", rio_detail_ptr->rio_node_id, rio_detail_ptr->bbar, rio_detail_ptr->rio_type, rio_detail_ptr->owner_id, rio_detail_ptr->port0_node_connect, rio_detail_ptr->port0_port_connect, rio_detail_ptr->port1_node_connect, rio_detail_ptr->port1_port_connect, rio_detail_ptr->first_slot_num, rio_detail_ptr->status);
+ //create linked list of chassis
+ if (rio_detail_ptr->rio_type == 4 || rio_detail_ptr->rio_type == 5)
+ list_add (&rio_detail_ptr->rio_detail_list, &rio_vg_head);
+ //create linked list of expansion box
+ else if (rio_detail_ptr->rio_type == 6 || rio_detail_ptr->rio_type == 7)
+ list_add (&rio_detail_ptr->rio_detail_list, &rio_lo_head);
+ else
+ // not in my concern
+ kfree (rio_detail_ptr);
+ offset += 15;
+ }
+ print_lo_info ();
+ print_vg_info ();
+ return 0;
+}
+
+/*
+ * reorganizing linked list of chassis
+ */
+static struct opt_rio *search_opt_vg (u8 chassis_num)
+{
+ struct opt_rio *ptr;
+ struct list_head *ptr1;
+ list_for_each (ptr1, &opt_vg_head) {
+ ptr = list_entry (ptr1, struct opt_rio, opt_rio_list);
+ if (ptr->chassis_num == chassis_num)
+ return ptr;
+ }
+ return NULL;
+}
+
+static int combine_wpg_for_chassis (void)
+{
+ struct opt_rio *opt_rio_ptr = NULL;
+ struct rio_detail *rio_detail_ptr = NULL;
+ struct list_head *list_head_ptr = NULL;
+
+ list_for_each (list_head_ptr, &rio_vg_head) {
+ rio_detail_ptr = list_entry (list_head_ptr, struct rio_detail, rio_detail_list);
+ opt_rio_ptr = search_opt_vg (rio_detail_ptr->chassis_num);
+ if (!opt_rio_ptr) {
+ opt_rio_ptr = (struct opt_rio *) kmalloc (sizeof (struct opt_rio), GFP_KERNEL);
+ if (!opt_rio_ptr)
+ return -ENOMEM;
+ memset (opt_rio_ptr, 0, sizeof (struct opt_rio));
+ opt_rio_ptr->rio_type = rio_detail_ptr->rio_type;
+ opt_rio_ptr->chassis_num = rio_detail_ptr->chassis_num;
+ opt_rio_ptr->first_slot_num = rio_detail_ptr->first_slot_num;
+ opt_rio_ptr->middle_num = rio_detail_ptr->first_slot_num;
+ list_add (&opt_rio_ptr->opt_rio_list, &opt_vg_head);
+ } else {
+ opt_rio_ptr->first_slot_num = min (opt_rio_ptr->first_slot_num, rio_detail_ptr->first_slot_num);
+ opt_rio_ptr->middle_num = max (opt_rio_ptr->middle_num, rio_detail_ptr->first_slot_num);
+ }
+ }
+ print_opt_vg ();
+ return 0;
+}
+
+/*
+ * reorgnizing linked list of expansion box
+ */
+static struct opt_rio_lo *search_opt_lo (u8 chassis_num)
+{
+ struct opt_rio_lo *ptr;
+ struct list_head *ptr1;
+ list_for_each (ptr1, &opt_lo_head) {
+ ptr = list_entry (ptr1, struct opt_rio_lo, opt_rio_lo_list);
+ if (ptr->chassis_num == chassis_num)
+ return ptr;
+ }
+ return NULL;
+}
+
+static int combine_wpg_for_expansion (void)
+{
+ struct opt_rio_lo *opt_rio_lo_ptr = NULL;
+ struct rio_detail *rio_detail_ptr = NULL;
+ struct list_head *list_head_ptr = NULL;
+
+ list_for_each (list_head_ptr, &rio_lo_head) {
+ rio_detail_ptr = list_entry (list_head_ptr, struct rio_detail, rio_detail_list);
+ opt_rio_lo_ptr = search_opt_lo (rio_detail_ptr->chassis_num);
+ if (!opt_rio_lo_ptr) {
+ opt_rio_lo_ptr = (struct opt_rio_lo *) kmalloc (sizeof (struct opt_rio_lo), GFP_KERNEL);
+ if (!opt_rio_lo_ptr)
+ return -ENOMEM;
+ memset (opt_rio_lo_ptr, 0, sizeof (struct opt_rio_lo));
+ opt_rio_lo_ptr->rio_type = rio_detail_ptr->rio_type;
+ opt_rio_lo_ptr->chassis_num = rio_detail_ptr->chassis_num;
+ opt_rio_lo_ptr->first_slot_num = rio_detail_ptr->first_slot_num;
+ opt_rio_lo_ptr->middle_num = rio_detail_ptr->first_slot_num;
+ opt_rio_lo_ptr->pack_count = 1;
+
+ list_add (&opt_rio_lo_ptr->opt_rio_lo_list, &opt_lo_head);
+ } else {
+ opt_rio_lo_ptr->first_slot_num = min (opt_rio_lo_ptr->first_slot_num, rio_detail_ptr->first_slot_num);
+ opt_rio_lo_ptr->middle_num = max (opt_rio_lo_ptr->middle_num, rio_detail_ptr->first_slot_num);
+ opt_rio_lo_ptr->pack_count = 2;
+ }
+ }
+ return 0;
+}
+
+static char *convert_2digits_to_char (int var)
+{
+ int bit;
+ char *str1;
+
+ str = (char *) kmalloc (3, GFP_KERNEL);
+ memset (str, 0, 3);
+ str1 = (char *) kmalloc (2, GFP_KERNEL);
+ memset (str, 0, 3);
+ bit = (int)(var / 10);
+ switch (bit) {
+ case 0:
+ //one digit number
+ *str = (char)(var + 48);
+ return str;
+ default:
+ //2 digits number
+ *str1 = (char)(bit + 48);
+ strncpy (str, str1, 1);
+ memset (str1, 0, 3);
+ *str1 = (char)((var % 10) + 48);
+ strcat (str, str1);
+ return str;
+ }
+ return NULL;
+}
+
+/* Since we don't know the max slot number per each chassis, hence go
+ * through the list of all chassis to find out the range
+ * Arguments: slot_num, 1st slot number of the chassis we think we are on,
+ * var (0 = chassis, 1 = expansion box)
+ */
+static int first_slot_num (u8 slot_num, u8 first_slot, u8 var)
+{
+ struct opt_rio *opt_vg_ptr = NULL;
+ struct opt_rio_lo *opt_lo_ptr = NULL;
+ struct list_head *ptr = NULL;
+ int rc = 0;
+
+ if (!var) {
+ list_for_each (ptr, &opt_vg_head) {
+ opt_vg_ptr = list_entry (ptr, struct opt_rio, opt_rio_list);
+ if ((first_slot < opt_vg_ptr->first_slot_num) && (slot_num >= opt_vg_ptr->first_slot_num)) {
+ rc = -ENODEV;
+ break;
+ }
+ }
+ } else {
+ list_for_each (ptr, &opt_lo_head) {
+ opt_lo_ptr = list_entry (ptr, struct opt_rio_lo, opt_rio_lo_list);
+ if ((first_slot < opt_lo_ptr->first_slot_num) && (slot_num >= opt_lo_ptr->first_slot_num)) {
+ rc = -ENODEV;
+ break;
+ }
+ }
+ }
+ return rc;
}
+static struct opt_rio_lo * find_rxe_num (u8 slot_num)
+{
+ struct opt_rio_lo *opt_lo_ptr;
+ struct list_head *ptr;
+
+ list_for_each (ptr, &opt_lo_head) {
+ opt_lo_ptr = list_entry (ptr, struct opt_rio_lo, opt_rio_lo_list);
+ //check to see if this slot_num belongs to expansion box
+ if ((slot_num >= opt_lo_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_lo_ptr->first_slot_num, 1)))
+ return opt_lo_ptr;
+ }
+ return NULL;
+}
+
+static struct opt_rio * find_chassis_num (u8 slot_num)
+{
+ struct opt_rio *opt_vg_ptr;
+ struct list_head *ptr;
+
+ list_for_each (ptr, &opt_vg_head) {
+ opt_vg_ptr = list_entry (ptr, struct opt_rio, opt_rio_list);
+ //check to see if this slot_num belongs to chassis
+ if ((slot_num >= opt_vg_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_vg_ptr->first_slot_num, 0)))
+ return opt_vg_ptr;
+ }
+ return NULL;
+}
+
+/* This routine will find out how many slots are in the chassis, so that
+ * the slot numbers for rxe100 would start from 1, and not from 7, or 6 etc
+ */
+static u8 calculate_first_slot (u8 slot_num)
+{
+ u8 first_slot = 1;
+ struct list_head * list;
+ struct slot * slot_cur;
+
+ list_for_each (list, &ibmphp_slot_head) {
+ slot_cur = list_entry (list, struct slot, ibm_slot_list);
+ if (slot_cur->ctrl) {
+ if ((slot_cur->ctrl->ctlr_type != 4) && (slot_cur->ctrl->ending_slot_num > first_slot) && (slot_num > slot_cur->ctrl->ending_slot_num))
+ first_slot = slot_cur->ctrl->ending_slot_num;
+ }
+ }
+ return first_slot + 1;
+
+}
+static char *create_file_name (struct slot * slot_cur)
+{
+ struct opt_rio *opt_vg_ptr = NULL;
+ struct opt_rio_lo *opt_lo_ptr = NULL;
+ char *ptr_chassis_num, *ptr_rxe_num, *ptr_slot_num;
+ int which = 0; /* rxe = 1, chassis = 0 */
+ u8 number = 1; /* either chassis or rxe # */
+ u8 first_slot = 1;
+ u8 slot_num;
+ u8 flag = 0;
+
+ if (!slot_cur) {
+ err ("Structure passed is empty \n");
+ return NULL;
+ }
+
+ slot_num = slot_cur->number;
+
+ chassis_str = (char *) kmalloc (30, GFP_KERNEL);
+ memset (chassis_str, 0, 30);
+ rxe_str = (char *) kmalloc (30, GFP_KERNEL);
+ memset (rxe_str, 0, 30);
+ ptr_chassis_num = (char *) kmalloc (3, GFP_KERNEL);
+ memset (ptr_chassis_num, 0, 3);
+ ptr_rxe_num = (char *) kmalloc (3, GFP_KERNEL);
+ memset (ptr_rxe_num, 0, 3);
+ ptr_slot_num = (char *) kmalloc (3, GFP_KERNEL);
+ memset (ptr_slot_num, 0, 3);
+
+ strcpy (chassis_str, "chassis");
+ strcpy (rxe_str, "rxe");
+
+ if (rio_table_ptr) {
+ if (rio_table_ptr->ver_num == 3) {
+ opt_vg_ptr = find_chassis_num (slot_num);
+ opt_lo_ptr = find_rxe_num (slot_num);
+ }
+ }
+ if (opt_vg_ptr) {
+ if (opt_lo_ptr) {
+ if ((slot_num - opt_vg_ptr->first_slot_num) > (slot_num - opt_lo_ptr->first_slot_num)) {
+ number = opt_lo_ptr->chassis_num;
+ first_slot = opt_lo_ptr->first_slot_num;
+ which = 1; /* it is RXE */
+ } else {
+ first_slot = opt_vg_ptr->first_slot_num;
+ number = opt_vg_ptr->chassis_num;
+ which = 0;
+ }
+ } else {
+ first_slot = opt_vg_ptr->first_slot_num;
+ number = opt_vg_ptr->chassis_num;
+ which = 0;
+ }
+ ++flag;
+ } else if (opt_lo_ptr) {
+ number = opt_lo_ptr->chassis_num;
+ first_slot = opt_lo_ptr->first_slot_num;
+ which = 1;
+ ++flag;
+ } else if (rio_table_ptr) {
+ if (rio_table_ptr->ver_num == 3) {
+ /* if both NULL and we DO have correct RIO table in BIOS */
+ return NULL;
+ }
+ }
+ if (!flag) {
+ if (slot_cur->ctrl->ctlr_type == 4) {
+ first_slot = calculate_first_slot (slot_num);
+ which = 1;
+ } else {
+ which = 0;
+ }
+ }
+
+ switch (which) {
+ case 0:
+ /* Chassis */
+ *ptr_chassis_num = (char)(number + 48);
+ strcat (chassis_str, ptr_chassis_num);
+ kfree (ptr_chassis_num);
+ strcat (chassis_str, "slot");
+ ptr_slot_num = convert_2digits_to_char (slot_num - first_slot + 1);
+ strcat (chassis_str, ptr_slot_num);
+ kfree (ptr_slot_num);
+ return chassis_str;
+ break;
+ case 1:
+ /* RXE */
+ *ptr_rxe_num = (char)(number + 48);
+ strcat (rxe_str, ptr_rxe_num);
+ kfree (ptr_rxe_num);
+ strcat (rxe_str, "slot");
+ ptr_slot_num = convert_2digits_to_char (slot_num - first_slot + 1);
+ strcat (rxe_str, ptr_slot_num);
+ kfree (ptr_slot_num);
+ return rxe_str;
+ break;
+ }
+ return NULL;
+}
/*
* map info (ctlr-id, slot count, slot#.. bus count, bus#, ctlr type...) of
@@ -399,6 +814,8 @@
struct ebda_hpc_slot *slot_ptr;
struct bus_info *bus_info_ptr1, *bus_info_ptr2;
int rc;
+ struct slot *slot_cur;
+ struct list_head *list;
addr = hpc_list_ptr->phys_addr;
for (ctlr = 0; ctlr < hpc_list_ptr->num_ctlrs; ctlr++) {
@@ -509,7 +926,7 @@
hpc_ptr->u.pci_ctlr.bus = readb (io_mem + addr);
hpc_ptr->u.pci_ctlr.dev_fun = readb (io_mem + addr + 1);
hpc_ptr->irq = readb (io_mem + addr + 2);
- addr += 3;
+ addr += 3;
break;
case 0:
@@ -520,12 +937,6 @@
break;
case 2:
- hpc_ptr->u.wpeg_ctlr.wpegbbar = readl (io_mem + addr);
- hpc_ptr->u.wpeg_ctlr.i2c_addr = readb (io_mem + addr + 4);
-
- hpc_ptr->irq = readb (io_mem + addr + 5);
- addr += 6;
- break;
case 4:
hpc_ptr->u.wpeg_ctlr.wpegbbar = readl (io_mem + addr);
hpc_ptr->u.wpeg_ctlr.i2c_addr = readb (io_mem + addr + 4);
@@ -536,12 +947,16 @@
iounmap (io_mem);
return -ENODEV;
}
+
/* following 3 line: Now our driver only supports I2c ctlrType */
if ((hpc_ptr->ctlr_type != 2) && (hpc_ptr->ctlr_type != 4)) {
err ("Please run this driver on ibm xseries440\n ");
return -ENODEV;
}
+ //reorganize chassis' linked list
+ combine_wpg_for_chassis ();
+ combine_wpg_for_expansion ();
hpc_ptr->revision = 0xff;
hpc_ptr->options = 0xff;
hpc_ptr->starting_slot_num = hpc_ptr->slots[0].slot_num;
@@ -565,7 +980,7 @@
}
memset (hp_slot_ptr->info, 0, sizeof (struct hotplug_slot_info));
- hp_slot_ptr->name = (char *) kmalloc (10, GFP_KERNEL);
+ hp_slot_ptr->name = (char *) kmalloc (30, GFP_KERNEL);
if (!hp_slot_ptr->name) {
iounmap (io_mem);
kfree (hp_slot_ptr->info);
@@ -582,9 +997,7 @@
return -ENOMEM;
}
-
((struct slot *)hp_slot_ptr->private)->flag = TRUE;
- snprintf (hp_slot_ptr->name, 10, "%d", hpc_ptr->slots[index].slot_num);
((struct slot *) hp_slot_ptr->private)->capabilities = hpc_ptr->slots[index].slot_cap;
if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_133_MAX) == EBDA_SLOT_133_MAX)
@@ -616,7 +1029,6 @@
((struct slot *) hp_slot_ptr->private)->number = hpc_ptr->slots[index].slot_num;
((struct slot *) hp_slot_ptr->private)->hotplug_slot = hp_slot_ptr;
-
rc = ibmphp_hpc_fillhpslotinfo (hp_slot_ptr);
if (rc) {
iounmap (io_mem);
@@ -630,8 +1042,6 @@
}
hp_slot_ptr->ops = &ibmphp_hotplug_slot_ops;
- pci_hp_register (hp_slot_ptr);
-
// end of registering ibm slot with hotplug core
list_add (& ((struct slot *)(hp_slot_ptr->private))->ibm_slot_list, &ibmphp_slot_head);
@@ -641,7 +1051,20 @@
list_add (&hpc_ptr->ebda_hpc_list, &ebda_hpc_head );
} /* each hpc */
+
+ list_for_each (list, &ibmphp_slot_head) {
+ slot_cur = list_entry (list, struct slot, ibm_slot_list);
+
+ snprintf (slot_cur->hotplug_slot->name, 30, "%s", create_file_name (slot_cur));
+ if (chassis_str)
+ kfree (chassis_str);
+ if (rxe_str)
+ kfree (rxe_str);
+ pci_hp_register (slot_cur->hotplug_slot);
+ }
+
print_ebda_hpc ();
+ print_ibm_slot ();
return 0;
}
@@ -681,7 +1104,7 @@
addr += 6;
debug ("rsrc from io type ----\n");
- debug ("rsrc type: %x bus#: %x dev_func: %x start addr: %lx end addr: %lx\n",
+ debug ("rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n",
rsrc_ptr->rsrc_type, rsrc_ptr->bus_num, rsrc_ptr->dev_fun, rsrc_ptr->start_addr, rsrc_ptr->end_addr);
list_add (&rsrc_ptr->ebda_pci_rsrc_list, &ibmphp_ebda_pci_rsrc_head);
@@ -702,7 +1125,7 @@
addr += 10;
debug ("rsrc from mem or pfm ---\n");
- debug ("rsrc type: %x bus#: %x dev_func: %x start addr: %lx end addr: %lx\n",
+ debug ("rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n",
rsrc_ptr->rsrc_type, rsrc_ptr->bus_num, rsrc_ptr->dev_fun, rsrc_ptr->start_addr, rsrc_ptr->end_addr);
list_add (&rsrc_ptr->ebda_pci_rsrc_list, &ibmphp_ebda_pci_rsrc_head);
@@ -714,56 +1137,6 @@
return 0;
}
-/*
- * map info of scalability details and rio details from physical address
- */
-static int ebda_rio_table(void)
-{
- u16 offset;
- u8 i;
- struct scal_detail *scal_detail_ptr;
- struct rio_detail *rio_detail_ptr;
-
- offset = rio_table_ptr->offset;
- for (i = 0; i < rio_table_ptr->scal_count; i++) {
-
- scal_detail_ptr = kmalloc (sizeof (struct scal_detail), GFP_KERNEL );
- if (!scal_detail_ptr )
- return -ENOMEM;
- memset (scal_detail_ptr, 0, sizeof (struct scal_detail) );
- scal_detail_ptr->node_id = readb (io_mem + offset);
- scal_detail_ptr->cbar = readl (io_mem+ offset + 1);
- scal_detail_ptr->port0_node_connect = readb (io_mem + 5);
- scal_detail_ptr->port0_port_connect = readb (io_mem + 6);
- scal_detail_ptr->port1_node_connect = readb (io_mem + 7);
- scal_detail_ptr->port1_port_connect = readb (io_mem + 8);
- scal_detail_ptr->port2_node_connect = readb (io_mem + 9);
- scal_detail_ptr->port2_port_connect = readb (io_mem + 10);
- debug ("node_id: %x\ncbar: %x\nport0_node: %x\nport0_port: %x\nport1_node: %x\nport1_port: %x\nport2_node: %x\nport2_port: %x\n", scal_detail_ptr->node_id, scal_detail_ptr->cbar, scal_detail_ptr->port0_node_connect, scal_detail_ptr->port0_port_connect, scal_detail_ptr->port1_node_connect, scal_detail_ptr->port1_port_connect, scal_detail_ptr->port2_node_connect, scal_detail_ptr->port2_port_connect);
-// list_add (&scal_detail_ptr->scal_detail_list, &scal_detail_head);
- offset += 11;
- }
- for (i=0; i < rio_table_ptr->riodev_count; i++) {
- rio_detail_ptr = kmalloc (sizeof (struct rio_detail), GFP_KERNEL );
- if (!rio_detail_ptr )
- return -ENOMEM;
- memset (rio_detail_ptr, 0, sizeof (struct rio_detail) );
- rio_detail_ptr->rio_node_id = readb (io_mem + offset );
- rio_detail_ptr->bbar = readl (io_mem + offset + 1);
- rio_detail_ptr->rio_type = readb (io_mem + offset + 5);
- rio_detail_ptr->owner_id = readb (io_mem + offset + 6);
- rio_detail_ptr->port0_node_connect = readb (io_mem + offset + 7);
- rio_detail_ptr->port0_port_connect = readb (io_mem + offset + 8);
- rio_detail_ptr->port1_node_connect = readb (io_mem + offset + 9);
- rio_detail_ptr->port1_port_connect = readb (io_mem + offset + 10);
- rio_detail_ptr->first_slot_num = readb (io_mem + offset + 11);
- rio_detail_ptr->status = readb (io_mem + offset + 12);
- debug ("rio_node_id: %x\nbbar: %x\nrio_type: %x\nowner_id: %x\nport0_node: %x\nport0_port: %x\nport1_node: %x\nport1_port: %x\nfirst_slot_num: %x\nstatus: %x\n", rio_detail_ptr->rio_node_id, rio_detail_ptr->bbar, rio_detail_ptr->rio_type, rio_detail_ptr->owner_id, rio_detail_ptr->port0_node_connect, rio_detail_ptr->port0_port_connect, rio_detail_ptr->port1_node_connect, rio_detail_ptr->port1_port_connect, rio_detail_ptr->first_slot_num, rio_detail_ptr->status);
- offset += 13;
- }
- return 0;
-}
-
u16 ibmphp_get_total_controllers (void)
{
return hpc_list_ptr->num_ctlrs;
@@ -829,27 +1202,9 @@
}
}
-/*
- * Calculate the total hot pluggable slots controlled by total hpcs
- */
-/*
-int ibmphp_get_total_hp_slots (void)
-{
- struct ebda_hpc *ptr;
- int slot_num = 0;
-
- ptr = ebda_hpc_head;
- while (ptr != NULL) {
- slot_num += ptr->slot_count;
- ptr = ptr->next;
- }
- return slot_num;
-}
-*/
-
void ibmphp_free_ebda_hpc_queue (void)
{
- struct controller *controller;
+ struct controller *controller = NULL;
struct list_head *list;
struct list_head *next;
@@ -871,4 +1226,3 @@
resource = NULL;
}
}
-
diff -Nru a/drivers/hotplug/ibmphp_hpc.c b/drivers/hotplug/ibmphp_hpc.c
--- a/drivers/hotplug/ibmphp_hpc.c Fri Sep 13 10:57:25 2002
+++ b/drivers/hotplug/ibmphp_hpc.c Fri Sep 13 10:57:25 2002
@@ -106,8 +106,8 @@
//----------------------------------------------------------------------------
// local function prototypes
//----------------------------------------------------------------------------
-static u8 ctrl_read (struct controller *, void *, u8);
-static u8 ctrl_write (struct controller *, void *, u8, u8);
+static u8 i2c_ctrl_read (struct controller *, void *, u8);
+static u8 i2c_ctrl_write (struct controller *, void *, u8, u8);
static u8 hpc_writecmdtoindex (u8, u8);
static u8 hpc_readcmdtoindex (u8, u8);
static void get_hpc_access (void);
@@ -141,12 +141,12 @@
}
/*----------------------------------------------------------------------
-* Name: ctrl_read
+* Name: i2c_ctrl_read
*
* Action: read from HPC over I2C
*
*---------------------------------------------------------------------*/
-static u8 ctrl_read (struct controller *ctlr_ptr, void *WPGBbar, u8 index)
+static u8 i2c_ctrl_read (struct controller *ctlr_ptr, void *WPGBbar, u8 index)
{
u8 status;
int i;
@@ -248,13 +248,13 @@
}
/*----------------------------------------------------------------------
-* Name: ctrl_write
+* Name: i2c_ctrl_write
*
* Action: write to HPC over I2C
*
* Return 0 or error codes
*---------------------------------------------------------------------*/
-static u8 ctrl_write (struct controller *ctlr_ptr, void *WPGBbar, u8 index, u8 cmd)
+static u8 i2c_ctrl_write (struct controller *ctlr_ptr, void *WPGBbar, u8 index, u8 cmd)
{
u8 rc;
void *wpg_addr; // base addr + offset
@@ -350,6 +350,33 @@
return (rc);
}
+static u8 ctrl_read (struct controller *ctlr, void *base, u8 offset)
+{
+ u8 rc;
+ switch (ctlr->ctlr_type) {
+ case 2:
+ case 4:
+ rc = i2c_ctrl_read (ctlr, base, offset);
+ break;
+ default:
+ return -ENODEV;
+ }
+ return rc;
+}
+
+static u8 ctrl_write (struct controller *ctlr, void *base, u8 offset, u8 data)
+{
+ u8 rc = 0;
+ switch (ctlr->ctlr_type) {
+ case 2:
+ case 4:
+ rc = i2c_ctrl_write(ctlr, base, offset, data);
+ break;
+ default:
+ return -ENODEV;
+ }
+ return rc;
+}
/*----------------------------------------------------------------------
* Name: hpc_writecmdtoindex()
*
@@ -448,7 +475,7 @@
*---------------------------------------------------------------------*/
int ibmphp_hpc_readslot (struct slot * pslot, u8 cmd, u8 * pstatus)
{
- void *wpg_bbar;
+ void *wpg_bbar = NULL;
struct controller *ctlr_ptr;
struct list_head *pslotlist;
u8 index, status;
@@ -490,7 +517,8 @@
//--------------------------------------------------------------------
// map physical address to logical address
//--------------------------------------------------------------------
- wpg_bbar = ioremap (ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
+ if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
+ wpg_bbar = ioremap (ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
//--------------------------------------------------------------------
// check controller status before reading
@@ -568,7 +596,11 @@
//--------------------------------------------------------------------
// cleanup
//--------------------------------------------------------------------
- iounmap (wpg_bbar); // remove physical to logical address mapping
+
+ // remove physical to logical address mapping
+ if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
+ iounmap (wpg_bbar);
+
free_hpc_access ();
debug_polling ("%s - Exit rc[%d]\n", __FUNCTION__, rc);
@@ -582,7 +614,7 @@
*---------------------------------------------------------------------*/
int ibmphp_hpc_writeslot (struct slot * pslot, u8 cmd)
{
- void *wpg_bbar;
+ void *wpg_bbar = NULL;
struct controller *ctlr_ptr;
u8 index, status;
int busindex;
@@ -625,12 +657,13 @@
//--------------------------------------------------------------------
// map physical address to logical address
//--------------------------------------------------------------------
- wpg_bbar = ioremap (ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
+ if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4)) {
+ wpg_bbar = ioremap (ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
- debug ("%s - ctlr id[%x] physical[%lx] logical[%lx] i2c[%x]\n", __FUNCTION__,
+ debug ("%s - ctlr id[%x] physical[%lx] logical[%lx] i2c[%x]\n", __FUNCTION__,
ctlr_ptr->ctlr_id, (ulong) (ctlr_ptr->u.wpeg_ctlr.wpegbbar), (ulong) wpg_bbar,
ctlr_ptr->u.wpeg_ctlr.i2c_addr);
-
+ }
//--------------------------------------------------------------------
// check controller status before writing
//--------------------------------------------------------------------
@@ -667,7 +700,10 @@
ctlr_ptr->status = status;
}
// cleanup
- iounmap (wpg_bbar); // remove physical to logical address mapping
+
+ // remove physical to logical address mapping
+ if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
+ iounmap (wpg_bbar);
free_hpc_access ();
debug_polling ("%s - Exit rc[%d]\n", __FUNCTION__, rc);
@@ -700,6 +736,7 @@
void ibmphp_lock_operations (void)
{
down (&semOperations);
+ to_debug = TRUE;
}
/*----------------------------------------------------------------------
@@ -709,6 +746,7 @@
{
debug ("%s - Entry\n", __FUNCTION__);
up (&semOperations);
+ to_debug = FALSE;
debug ("%s - Exit\n", __FUNCTION__);
}
@@ -733,82 +771,86 @@
debug ("%s - Entry\n", __FUNCTION__);
while (!ibmphp_shutdown) {
+ if (ibmphp_shutdown)
+ break;
+
/* try to get the lock to do some kind of harware access */
down (&semOperations);
switch (poll_state) {
- case POLL_LATCH_REGISTER:
- oldlatchlow = curlatchlow;
- ctrl_count = 0x00;
- list_for_each (pslotlist, &ibmphp_slot_head) {
- if (ctrl_count >= ibmphp_get_total_controllers())
- break;
- pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
- if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
- ctrl_count++;
- if (READ_SLOT_LATCH (pslot->ctrl)) {
- rc = ibmphp_hpc_readslot (pslot,
- READ_SLOTLATCHLOWREG,
- &curlatchlow);
- if (oldlatchlow != curlatchlow)
- process_changeinlatch (oldlatchlow,
- curlatchlow,
- pslot->ctrl);
- }
+ case POLL_LATCH_REGISTER:
+ oldlatchlow = curlatchlow;
+ ctrl_count = 0x00;
+ list_for_each (pslotlist, &ibmphp_slot_head) {
+ if (ctrl_count >= ibmphp_get_total_controllers())
+ break;
+ pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
+ if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
+ ctrl_count++;
+ if (READ_SLOT_LATCH (pslot->ctrl)) {
+ rc = ibmphp_hpc_readslot (pslot,
+ READ_SLOTLATCHLOWREG,
+ &curlatchlow);
+ if (oldlatchlow != curlatchlow)
+ process_changeinlatch (oldlatchlow,
+ curlatchlow,
+ pslot->ctrl);
}
}
- poll_state = POLL_SLOTS;
- break;
-
- case POLL_SLOTS:
- list_for_each (pslotlist, &ibmphp_slot_head) {
- pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
- // make a copy of the old status
- memcpy ((void *) &myslot, (void *) pslot,
- sizeof (struct slot));
- rc = ibmphp_hpc_readslot (pslot, READ_ALLSTAT, NULL);
- if ((myslot.status != pslot->status)
- || (myslot.ext_status != pslot->ext_status))
- process_changeinstatus (pslot, &myslot);
+ }
+ ++poll_count;
+ poll_state = POLL_SLEEP;
+ break;
+ case POLL_SLOTS:
+ list_for_each (pslotlist, &ibmphp_slot_head) {
+ pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
+ // make a copy of the old status
+ memcpy ((void *) &myslot, (void *) pslot,
+ sizeof (struct slot));
+ rc = ibmphp_hpc_readslot (pslot, READ_ALLSTAT, NULL);
+ if ((myslot.status != pslot->status)
+ || (myslot.ext_status != pslot->ext_status))
+ process_changeinstatus (pslot, &myslot);
+ }
+ ctrl_count = 0x00;
+ list_for_each (pslotlist, &ibmphp_slot_head) {
+ if (ctrl_count >= ibmphp_get_total_controllers())
+ break;
+ pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
+ if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
+ ctrl_count++;
+ if (READ_SLOT_LATCH (pslot->ctrl))
+ rc = ibmphp_hpc_readslot (pslot,
+ READ_SLOTLATCHLOWREG,
+ &curlatchlow);
}
+ }
+ ++poll_count;
+ poll_state = POLL_SLEEP;
+ break;
+ case POLL_SLEEP:
+ /* don't sleep with a lock on the hardware */
+ up (&semOperations);
+ long_delay (POLL_INTERVAL_SEC * HZ);
- ctrl_count = 0x00;
- list_for_each (pslotlist, &ibmphp_slot_head) {
- if (ctrl_count >= ibmphp_get_total_controllers())
- break;
- pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
- if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
- ctrl_count++;
- if (READ_SLOT_LATCH (pslot->ctrl))
- rc = ibmphp_hpc_readslot (pslot,
- READ_SLOTLATCHLOWREG,
- &curlatchlow);
- }
- }
- ++poll_count;
- if (poll_count >= POLL_LATCH_CNT) {
- poll_count = 0;
- poll_state = POLL_SLEEP;
- }
+ if (ibmphp_shutdown)
break;
-
- case POLL_SLEEP:
- /* don't sleep with a lock on the hardware */
- up (&semOperations);
- long_delay (POLL_INTERVAL_SEC * HZ);
- down (&semOperations);
+
+ down (&semOperations);
+
+ if (poll_count >= POLL_LATCH_CNT) {
+ poll_count = 0;
+ poll_state = POLL_SLOTS;
+ } else
poll_state = POLL_LATCH_REGISTER;
- break;
- }
-
+ break;
+ }
/* give up the harware semaphore */
up (&semOperations);
-
/* sleep for a short time just for good measure */
set_current_state (TASK_INTERRUPTIBLE);
schedule_timeout (HZ/10);
}
-
up (&sem_exit);
debug ("%s - Exit\n", __FUNCTION__);
}
@@ -1070,15 +1112,23 @@
debug ("ibmphp_hpc_stop_poll_thread - Entry\n");
ibmphp_shutdown = TRUE;
+ debug ("before locking operations \n");
ibmphp_lock_operations ();
-
+ debug ("after locking operations \n");
+
// wait for poll thread to exit
+ debug ("before sem_exit down \n");
down (&sem_exit);
+ debug ("after sem_exit down \n");
// cleanup
+ debug ("before free_hpc_access \n");
free_hpc_access ();
+ debug ("after free_hpc_access \n");
ibmphp_unlock_operations ();
+ debug ("after unlock operations \n");
up (&sem_exit);
+ debug ("after sem exit up\n");
debug ("ibmphp_hpc_stop_poll_thread - Exit\n");
}
diff -Nru a/drivers/hotplug/ibmphp_pci.c b/drivers/hotplug/ibmphp_pci.c
--- a/drivers/hotplug/ibmphp_pci.c Fri Sep 13 10:57:25 2002
+++ b/drivers/hotplug/ibmphp_pci.c Fri Sep 13 10:57:25 2002
@@ -920,16 +920,30 @@
debug ("flag_io = %x, flag_mem = %x, flag_pfmem = %x\n", flag_io, flag_mem, flag_pfmem);
if (flag_io && flag_mem && flag_pfmem) {
- bus = kmalloc (sizeof (struct bus_node), GFP_KERNEL);
+ /* If on bootup, there was a bridged card in this slot,
+ * then card was removed and ibmphp got unloaded and loaded
+ * back again, there's no way for us to remove the bus
+ * struct, so no need to kmalloc, can use existing node
+ */
+ bus = ibmphp_find_res_bus (sec_number);
if (!bus) {
- err ("out of system memory \n");
- retval = -ENOMEM;
+ bus = kmalloc (sizeof (struct bus_node), GFP_KERNEL);
+ if (!bus) {
+ err ("out of system memory \n");
+ retval = -ENOMEM;
+ goto error;
+ }
+ memset (bus, 0, sizeof (struct bus_node));
+ bus->busno = sec_number;
+ debug ("b4 adding new bus\n");
+ rc = add_new_bus (bus, io, mem, pfmem, func->busno);
+ } else if (!(bus->rangeIO) && !(bus->rangeMem) && !(bus->rangePFMem))
+ rc = add_new_bus (bus, io, mem, pfmem, 0xFF);
+ else {
+ err ("expected bus structure not empty? \n");
+ retval = -EIO;
goto error;
}
- memset (bus, 0, sizeof (struct bus_node));
- bus->busno = sec_number;
- debug ("b4 adding new bus\n");
- rc = add_new_bus (bus, io, mem, pfmem, func->busno);
if (rc) {
if (rc == -ENOMEM) {
ibmphp_remove_bus (bus, func->busno);
@@ -1579,7 +1593,6 @@
}
if (sl->func) {
- debug ("do we come in here? \n");
cur_func = sl->func;
while (cur_func) {
/* TO DO: WILL MOST LIKELY NEED TO GET RID OF THE BUS STRUCTURE FROM RESOURCES AS WELL */
@@ -1619,6 +1632,7 @@
sl->func = NULL;
*slot_cur = sl;
+ debug ("%s - exit\n", __FUNCTION__);
return 0;
}
@@ -1638,14 +1652,15 @@
struct bus_node *cur_bus = NULL;
/* Trying to find the parent bus number */
- cur_bus = ibmphp_find_res_bus (parent_busno);
- if (!cur_bus) {
- err ("strange, cannot find bus which is supposed to be at the system... something is terribly wrong...\n");
- return -ENODEV;
+ if (parent_busno != 0xFF) {
+ cur_bus = ibmphp_find_res_bus (parent_busno);
+ if (!cur_bus) {
+ err ("strange, cannot find bus which is supposed to be at the system... something is terribly wrong...\n");
+ return -ENODEV;
+ }
+
+ list_add (&bus->bus_list, &cur_bus->bus_list);
}
-
- list_add (&bus->bus_list, &cur_bus->bus_list);
-
if (io) {
io_range = kmalloc (sizeof (struct range_node), GFP_KERNEL);
if (!io_range) {
@@ -1698,6 +1713,7 @@
int min, max;
u8 busno;
struct bus_info *bus;
+ struct bus_node *bus_cur;
bus = ibmphp_find_same_bus_num (primary_busno);
if (!bus) {
@@ -1712,7 +1728,12 @@
}
busno = (u8) (slotno - (u8) min);
busno += primary_busno + 0x01;
- if (!ibmphp_find_res_bus (busno))
+ bus_cur = ibmphp_find_res_bus (busno);
+ /* either there is no such bus number, or there are no ranges, which
+ * can only happen if we removed the bridged device in previous load
+ * of the driver, and now only have the skeleton bus struct
+ */
+ if ((!bus_cur) || (!(bus_cur->rangeIO) && !(bus_cur->rangeMem) && !(bus_cur->rangePFMem)))
return busno;
return 0xff;
}
diff -Nru a/drivers/hotplug/ibmphp_res.c b/drivers/hotplug/ibmphp_res.c
--- a/drivers/hotplug/ibmphp_res.c Fri Sep 13 10:57:25 2002
+++ b/drivers/hotplug/ibmphp_res.c Fri Sep 13 10:57:25 2002
@@ -44,11 +44,16 @@
static inline struct bus_node *find_bus_wprev (u8, struct bus_node **, u8);
static LIST_HEAD(gbuses);
-
-static struct bus_node * alloc_error_bus (struct ebda_pci_rsrc * curr)
+LIST_HEAD(ibmphp_res_head);
+static struct bus_node * alloc_error_bus (struct ebda_pci_rsrc * curr, u8 busno, int flag)
{
struct bus_node * newbus;
+ if (!(curr) && !(flag)) {
+ err ("NULL pointer passed \n");
+ return NULL;
+ }
+
newbus = kmalloc (sizeof (struct bus_node), GFP_KERNEL);
if (!newbus) {
err ("out of system memory \n");
@@ -56,14 +61,24 @@
}
memset (newbus, 0, sizeof (struct bus_node));
- newbus->busno = curr->bus_num;
+ if (flag)
+ newbus->busno = busno;
+ else
+ newbus->busno = curr->bus_num;
list_add_tail (&newbus->bus_list, &gbuses);
return newbus;
}
static struct resource_node * alloc_resources (struct ebda_pci_rsrc * curr)
{
- struct resource_node *rs = kmalloc (sizeof (struct resource_node), GFP_KERNEL);
+ struct resource_node *rs;
+
+ if (!curr) {
+ err ("NULL passed to allocate \n");
+ return NULL;
+ }
+
+ rs = kmalloc (sizeof (struct resource_node), GFP_KERNEL);
if (!rs) {
err ("out of system memory \n");
return NULL;
@@ -298,7 +313,7 @@
* actually appears...
*/
if (ibmphp_add_resource (new_mem) < 0) {
- newbus = alloc_error_bus (curr);
+ newbus = alloc_error_bus (curr, 0, 0);
if (!newbus)
return -ENOMEM;
newbus->firstMem = new_mem;
@@ -315,7 +330,7 @@
new_pfmem->type = PFMEM;
new_pfmem->fromMem = FALSE;
if (ibmphp_add_resource (new_pfmem) < 0) {
- newbus = alloc_error_bus (curr);
+ newbus = alloc_error_bus (curr, 0, 0);
if (!newbus)
return -ENOMEM;
newbus->firstPFMem = new_pfmem;
@@ -339,7 +354,7 @@
* range actually appears...
*/
if (ibmphp_add_resource (new_io) < 0) {
- newbus = alloc_error_bus (curr);
+ newbus = alloc_error_bus (curr, 0, 0);
if (!newbus)
return -ENOMEM;
newbus->firstIO = new_io;
@@ -351,8 +366,6 @@
}
}
- debug ("after the while loop in rsrc_init \n");
-
list_for_each (tmp, &gbuses) {
bus_cur = list_entry (tmp, struct bus_node, bus_list);
/* This is to get info about PPB resources, since EBDA doesn't put this info into the primary bus info */
@@ -360,11 +373,9 @@
if (rc)
return rc;
}
- debug ("b4 once_over in rsrc_init \n");
rc = once_over (); /* This is to align ranges (so no -1) */
if (rc)
return rc;
- debug ("after once_over in rsrc_init \n");
return 0;
}
@@ -579,7 +590,7 @@
* based on their resource type and sorted by their starting addresses. It assigns
* the ptrs to next and nextRange if needed.
*
- * Input: 3 diff. resources (nulled out if not needed)
+ * Input: resource ptr
* Output: ptrs assigned (to the node)
* 0 or -1
*******************************************************************************/
@@ -592,12 +603,17 @@
struct resource_node *res_start = NULL;
debug ("%s - enter\n", __FUNCTION__);
+
+ if (!res) {
+ err ("NULL passed to add \n");
+ return -ENODEV;
+ }
bus_cur = find_bus_wprev (res->busno, NULL, 0);
if (!bus_cur) {
/* didn't find a bus, smth's wrong!!! */
- err ("no bus in the system, either pci_dev's wrong or allocation failed\n");
+ debug ("no bus in the system, either pci_dev's wrong or allocation failed\n");
return -ENODEV;
}
@@ -768,6 +784,11 @@
struct resource_node *mem_cur;
char * type = "";
+ if (!res) {
+ err ("resource to remove is NULL \n");
+ return -ENODEV;
+ }
+
bus_cur = find_bus_wprev (res->busno, NULL, 0);
if (!bus_cur) {
@@ -796,7 +817,6 @@
res_prev = NULL;
while (res_cur) {
- /* ???????????DO WE _NEED_ TO BE CHECKING FOR END AS WELL?????????? */
if ((res_cur->start == res->start) && (res_cur->end == res->end))
break;
res_prev = res_cur;
@@ -980,7 +1000,7 @@
if (!bus_cur) {
/* didn't find a bus, smth's wrong!!! */
- err ("no bus in the system, either pci_dev's wrong or allocation failed \n");
+ debug ("no bus in the system, either pci_dev's wrong or allocation failed \n");
return -EINVAL;
}
@@ -1339,7 +1359,7 @@
prev_bus = find_bus_wprev (parent_busno, NULL, 0);
if (!prev_bus) {
- err ("something terribly wrong. Cannot find parent bus to the one to remove\n");
+ debug ("something terribly wrong. Cannot find parent bus to the one to remove\n");
return -ENODEV;
}
@@ -1466,13 +1486,18 @@
/*
* find the resource node in the bus
- * Input: Resource needed, start address of the resource, type or resource
+ * Input: Resource needed, start address of the resource, type of resource
*/
int ibmphp_find_resource (struct bus_node *bus, u32 start_address, struct resource_node **res, int flag)
{
struct resource_node *res_cur = NULL;
char * type = "";
+ if (!bus) {
+ err ("The bus passed in NULL to find resource \n");
+ return -ENODEV;
+ }
+
switch (flag) {
case IO:
res_cur = bus->firstIO;
@@ -1513,11 +1538,11 @@
res_cur = res_cur->next;
}
if (!res_cur) {
- err ("SOS...cannot find %s resource in the bus. \n", type);
+ debug ("SOS...cannot find %s resource in the bus. \n", type);
return -EINVAL;
}
} else {
- err ("SOS... cannot find %s resource in the bus. \n", type);
+ debug ("SOS... cannot find %s resource in the bus. \n", type);
return -EINVAL;
}
}
@@ -1755,6 +1780,8 @@
struct range_node *range;
struct resource_node *res;
struct list_head *tmp;
+
+ debug_pci ("*****************START**********************\n");
if ((!list_empty(&gbuses)) && flags) {
err ("The GBUSES is not NULL?!?!?!?!?\n");
@@ -1763,50 +1790,50 @@
list_for_each (tmp, &gbuses) {
bus_cur = list_entry (tmp, struct bus_node, bus_list);
- debug ("This is bus # %d. There are \n", bus_cur->busno);
- debug ("IORanges = %d\t", bus_cur->noIORanges);
- debug ("MemRanges = %d\t", bus_cur->noMemRanges);
- debug ("PFMemRanges = %d\n", bus_cur->noPFMemRanges);
- debug ("The IO Ranges are as follows:\n");
+ debug_pci ("This is bus # %d. There are \n", bus_cur->busno);
+ debug_pci ("IORanges = %d\t", bus_cur->noIORanges);
+ debug_pci ("MemRanges = %d\t", bus_cur->noMemRanges);
+ debug_pci ("PFMemRanges = %d\n", bus_cur->noPFMemRanges);
+ debug_pci ("The IO Ranges are as follows:\n");
if (bus_cur->rangeIO) {
range = bus_cur->rangeIO;
for (i = 0; i < bus_cur->noIORanges; i++) {
- debug ("rangeno is %d\n", range->rangeno);
- debug ("[%x - %x]\n", range->start, range->end);
+ debug_pci ("rangeno is %d\n", range->rangeno);
+ debug_pci ("[%x - %x]\n", range->start, range->end);
range = range->next;
}
}
- debug ("The Mem Ranges are as follows:\n");
+ debug_pci ("The Mem Ranges are as follows:\n");
if (bus_cur->rangeMem) {
range = bus_cur->rangeMem;
for (i = 0; i < bus_cur->noMemRanges; i++) {
- debug ("rangeno is %d\n", range->rangeno);
- debug ("[%x - %x]\n", range->start, range->end);
+ debug_pci ("rangeno is %d\n", range->rangeno);
+ debug_pci ("[%x - %x]\n", range->start, range->end);
range = range->next;
}
}
- debug ("The PFMem Ranges are as follows:\n");
+ debug_pci ("The PFMem Ranges are as follows:\n");
if (bus_cur->rangePFMem) {
range = bus_cur->rangePFMem;
for (i = 0; i < bus_cur->noPFMemRanges; i++) {
- debug ("rangeno is %d\n", range->rangeno);
- debug ("[%x - %x]\n", range->start, range->end);
+ debug_pci ("rangeno is %d\n", range->rangeno);
+ debug_pci ("[%x - %x]\n", range->start, range->end);
range = range->next;
}
}
- debug ("The resources on this bus are as follows\n");
+ debug_pci ("The resources on this bus are as follows\n");
- debug ("IO...\n");
+ debug_pci ("IO...\n");
if (bus_cur->firstIO) {
res = bus_cur->firstIO;
while (res) {
- debug ("The range # is %d\n", res->rangeno);
- debug ("The bus, devfnc is %d, %x\n", res->busno, res->devfunc);
- debug ("[%x - %x], len=%x\n", res->start, res->end, res->len);
+ debug_pci ("The range # is %d\n", res->rangeno);
+ debug_pci ("The bus, devfnc is %d, %x\n", res->busno, res->devfunc);
+ debug_pci ("[%x - %x], len=%x\n", res->start, res->end, res->len);
if (res->next)
res = res->next;
else if (res->nextRange)
@@ -1815,13 +1842,13 @@
break;
}
}
- debug ("Mem...\n");
+ debug_pci ("Mem...\n");
if (bus_cur->firstMem) {
res = bus_cur->firstMem;
while (res) {
- debug ("The range # is %d\n", res->rangeno);
- debug ("The bus, devfnc is %d, %x\n", res->busno, res->devfunc);
- debug ("[%x - %x], len=%x\n", res->start, res->end, res->len);
+ debug_pci ("The range # is %d\n", res->rangeno);
+ debug_pci ("The bus, devfnc is %d, %x\n", res->busno, res->devfunc);
+ debug_pci ("[%x - %x], len=%x\n", res->start, res->end, res->len);
if (res->next)
res = res->next;
else if (res->nextRange)
@@ -1830,13 +1857,13 @@
break;
}
}
- debug ("PFMem...\n");
+ debug_pci ("PFMem...\n");
if (bus_cur->firstPFMem) {
res = bus_cur->firstPFMem;
while (res) {
- debug ("The range # is %d\n", res->rangeno);
- debug ("The bus, devfnc is %d, %x\n", res->busno, res->devfunc);
- debug ("[%x - %x], len=%x\n", res->start, res->end, res->len);
+ debug_pci ("The range # is %d\n", res->rangeno);
+ debug_pci ("The bus, devfnc is %d, %x\n", res->busno, res->devfunc);
+ debug_pci ("[%x - %x], len=%x\n", res->start, res->end, res->len);
if (res->next)
res = res->next;
else if (res->nextRange)
@@ -1846,23 +1873,53 @@
}
}
- debug ("PFMemFromMem...\n");
+ debug_pci ("PFMemFromMem...\n");
if (bus_cur->firstPFMemFromMem) {
res = bus_cur->firstPFMemFromMem;
while (res) {
- debug ("The range # is %d\n", res->rangeno);
- debug ("The bus, devfnc is %d, %x\n", res->busno, res->devfunc);
- debug ("[%x - %x], len=%x\n", res->start, res->end, res->len);
+ debug_pci ("The range # is %d\n", res->rangeno);
+ debug_pci ("The bus, devfnc is %d, %x\n", res->busno, res->devfunc);
+ debug_pci ("[%x - %x], len=%x\n", res->start, res->end, res->len);
res = res->next;
}
}
}
+ debug_pci ("***********************END***********************\n");
+}
+
+int static range_exists_already (struct range_node * range, struct bus_node * bus_cur, u8 type)
+{
+ struct range_node * range_cur = NULL;
+ switch (type) {
+ case IO:
+ range_cur = bus_cur->rangeIO;
+ break;
+ case MEM:
+ range_cur = bus_cur->rangeMem;
+ break;
+ case PFMEM:
+ range_cur = bus_cur->rangePFMem;
+ break;
+ default:
+ err ("wrong type passed to find out if range already exists \n");
+ return -ENODEV;
+ }
+
+ while (range_cur) {
+ if ((range_cur->start == range->start) && (range_cur->end == range->end))
+ return 1;
+ range_cur = range_cur->next;
+ }
+
+ return 0;
}
/* This routine will read the windows for any PPB we have and update the
* range info for the secondary bus, and will also input this info into
* primary bus, since BIOS doesn't. This is for PPB that are in the system
- * on bootup
+ * on bootup. For bridged cards that were added during previous load of the
+ * driver, only the ranges and the bus structure are added, the devices are
+ * added from NVRAM
* Input: primary busno
* Returns: none
* Note: this function doesn't take into account IO restrictions etc,
@@ -1883,6 +1940,8 @@
struct resource_node *pfmem;
struct range_node *range;
bus_cur = *bus;
+ if (!bus_cur)
+ return -ENODEV;
busno = bus_cur->busno;
debug ("inside update_bridge_ranges \n");
@@ -1915,6 +1974,12 @@
*/
pci_read_config_byte_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_SECONDARY_BUS, &sec_busno);
bus_sec = find_bus_wprev (sec_busno, NULL, 0);
+ /* this bus structure doesn't exist yet, PPB was configured during previous loading of ibmphp */
+ if (!bus_sec) {
+ bus_sec = alloc_error_bus (NULL, sec_busno, 1);
+ /* the rest will be populated during NVRAM call */
+ return 0;
+ }
pci_read_config_byte_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_IO_BASE, &start_io_address);
pci_read_config_byte_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_IO_LIMIT, &end_io_address);
pci_read_config_word_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_IO_BASE_UPPER16, &upper_io_start);
@@ -1925,9 +1990,7 @@
end_address |= (upper_io_end << 16);
if ((start_address) && (start_address <= end_address)) {
-
range = kmalloc (sizeof (struct range_node), GFP_KERNEL);
-
if (!range) {
err ("out of system memory \n");
return -ENOMEM;
@@ -1936,33 +1999,39 @@
range->start = start_address;
range->end = end_address + 0xfff;
- if (bus_sec->noIORanges > 0)
- add_range (IO, range, bus_sec);
- else {
+ if (bus_sec->noIORanges > 0) {
+ if (!range_exists_already (range, bus_sec, IO)) {
+ add_range (IO, range, bus_sec);
+ ++bus_sec->noIORanges;
+ } else {
+ kfree (range);
+ range = NULL;
+ }
+ } else {
/* 1st IO Range on the bus */
range->rangeno = 1;
bus_sec->rangeIO = range;
+ ++bus_sec->noIORanges;
}
-
- ++bus_sec->noIORanges;
fix_resources (bus_sec);
-
- io = kmalloc (sizeof (struct resource_node), GFP_KERNEL);
- if (!io) {
- kfree (range);
- err ("out of system memory \n");
- return -ENOMEM;
- }
- memset (io, 0, sizeof (struct resource_node));
- io->type = IO;
- io->busno = bus_cur->busno;
- io->devfunc = ((device << 3) | (function & 0x7));
- io->start = start_address;
- io->end = end_address + 0xfff;
- io->len = io->end - io->start + 1;
- ibmphp_add_resource (io);
- }
+ if (ibmphp_find_resource (bus_cur, start_address, &io, IO)) {
+ io = kmalloc (sizeof (struct resource_node), GFP_KERNEL);
+ if (!io) {
+ kfree (range);
+ err ("out of system memory \n");
+ return -ENOMEM;
+ }
+ memset (io, 0, sizeof (struct resource_node));
+ io->type = IO;
+ io->busno = bus_cur->busno;
+ io->devfunc = ((device << 3) | (function & 0x7));
+ io->start = start_address;
+ io->end = end_address + 0xfff;
+ io->len = io->end - io->start + 1;
+ ibmphp_add_resource (io);
+ }
+ }
pci_read_config_word_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_MEMORY_BASE, &start_mem_address);
pci_read_config_word_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_MEMORY_LIMIT, &end_mem_address);
@@ -1981,31 +2050,39 @@
range->start = start_address;
range->end = end_address + 0xfffff;
- if (bus_sec->noMemRanges > 0)
- add_range (MEM, range, bus_sec);
- else {
+ if (bus_sec->noMemRanges > 0) {
+ if (!range_exists_already (range, bus_sec, MEM)) {
+ add_range (MEM, range, bus_sec);
+ ++bus_sec->noMemRanges;
+ } else {
+ kfree (range);
+ range = NULL;
+ }
+ } else {
/* 1st Mem Range on the bus */
range->rangeno = 1;
bus_sec->rangeMem = range;
+ ++bus_sec->noMemRanges;
}
- ++bus_sec->noMemRanges;
fix_resources (bus_sec);
- mem = kmalloc (sizeof (struct resource_node), GFP_KERNEL);
- if (!mem) {
- kfree (range);
- err ("out of system memory \n");
- return -ENOMEM;
+ if (ibmphp_find_resource (bus_cur, start_address, &mem, MEM)) {
+ mem = kmalloc (sizeof (struct resource_node), GFP_KERNEL);
+ if (!mem) {
+ kfree (range);
+ err ("out of system memory \n");
+ return -ENOMEM;
+ }
+ memset (mem, 0, sizeof (struct resource_node));
+ mem->type = MEM;
+ mem->busno = bus_cur->busno;
+ mem->devfunc = ((device << 3) | (function & 0x7));
+ mem->start = start_address;
+ mem->end = end_address + 0xfffff;
+ mem->len = mem->end - mem->start + 1;
+ ibmphp_add_resource (mem);
}
- memset (mem, 0, sizeof (struct resource_node));
- mem->type = MEM;
- mem->busno = bus_cur->busno;
- mem->devfunc = ((device << 3) | (function & 0x7));
- mem->start = start_address;
- mem->end = end_address + 0xfffff;
- mem->len = mem->end - mem->start + 1;
- ibmphp_add_resource (mem);
}
pci_read_config_word_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_PREF_MEMORY_BASE, &start_mem_address);
pci_read_config_word_nodev (ibmphp_pci_root_ops, busno, device, function, PCI_PREF_MEMORY_LIMIT, &end_mem_address);
@@ -2029,32 +2106,40 @@
range->start = start_address;
range->end = end_address + 0xfffff;
- if (bus_sec->noPFMemRanges > 0)
- add_range (PFMEM, range, bus_sec);
- else {
+ if (bus_sec->noPFMemRanges > 0) {
+ if (!range_exists_already (range, bus_sec, PFMEM)) {
+ add_range (PFMEM, range, bus_sec);
+ ++bus_sec->noPFMemRanges;
+ } else {
+ kfree (range);
+ range = NULL;
+ }
+ } else {
/* 1st PFMem Range on the bus */
range->rangeno = 1;
bus_sec->rangePFMem = range;
+ ++bus_sec->noPFMemRanges;
}
- ++bus_sec->noPFMemRanges;
fix_resources (bus_sec);
+ if (ibmphp_find_resource (bus_cur, start_address, &pfmem, PFMEM)) {
+ pfmem = kmalloc (sizeof (struct resource_node), GFP_KERNEL);
+ if (!pfmem) {
+ kfree (range);
+ err ("out of system memory \n");
+ return -ENOMEM;
+ }
+ memset (pfmem, 0, sizeof (struct resource_node));
+ pfmem->type = PFMEM;
+ pfmem->busno = bus_cur->busno;
+ pfmem->devfunc = ((device << 3) | (function & 0x7));
+ pfmem->start = start_address;
+ pfmem->end = end_address + 0xfffff;
+ pfmem->len = pfmem->end - pfmem->start + 1;
+ pfmem->fromMem = FALSE;
- pfmem = kmalloc (sizeof (struct resource_node), GFP_KERNEL);
- if (!pfmem) {
- kfree (range);
- err ("out of system memory \n");
- return -ENOMEM;
+ ibmphp_add_resource (pfmem);
}
- memset (pfmem, 0, sizeof (struct resource_node));
- pfmem->type = PFMEM;
- pfmem->busno = bus_cur->busno;
- pfmem->devfunc = ((device << 3) | (function & 0x7));
- pfmem->start = start_address;
- pfmem->end = end_address + 0xfffff;
- pfmem->len = pfmem->end - pfmem->start + 1;
- pfmem->fromMem = FALSE;
- ibmphp_add_resource (pfmem);
}
break;
} /* end of switch */
^ permalink raw reply [flat|nested] 6+ messages in thread