From: Ville Herva <vherva@niksula.hut.fi>
To: gibbs@scsiguy.com, linux-kernel@vger.kernel.org
Cc: Jani Forssell <jani.forssell@viasys.com>
Subject: 2.4.20pre7, aic7xxx-6.2.8: Panic: HOST_MSG_LOOP with invalid SCB 0
Date: Fri, 20 Sep 2002 08:28:32 +0300 [thread overview]
Message-ID: <20020920052832.GH41965@niksula.cs.hut.fi> (raw)
Celeron 1.3GHz, Intel i815 chipset, 512MB ram.
AIC-2640 PCI card with uw and narrow connectors. A Seagate scsi disk
(rootfs) attached to uw, and a HP tape drive attached to narrow. Tape drive
never used.
I only ran 2.4.20pre7 (no other patches) for a night and it crashed:
-------------------------------------------------------------------
Kernel panic: HOST_MSG_LOOP with invalid SCB 0
In interrupt handler, not syncing
-------------------------------------------------------------------
Boot log snippet:
-------------------------------------------------------------------
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec 2940 SCSI adapter>
aic7870: Wide Channel A, SCSI Id=7, 16/253 SCBs
Vendor: SEAGATE Model: ST19171W Rev: 0024
Type: Direct-Access ANSI SCSI revision: 02
(scsi0:A:0): 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
Vendor: HP Model: C1537A Rev: L708
Type: Sequential-Access ANSI SCSI revision: 02
(scsi0:A:2): 10.000MB/s transfers (10.000MHz, offset 15)
scsi0:A:0:0: Tagged Queuing enabled. Depth 8
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 17783112 512-byte hdwr sectors (9105 MB)
sda: sda1 sda2 < sda5 sda6 >
-------------------------------------------------------------------
.config
-------------------------------------------------------------------
_SCSI_AIC7XXX=y
_AIC7XXX_CMDS_PER_DEVICE=8
_AIC7XXX_RESET_DELAY_MS=15000
IG_AIC7XXX_PROBE_EISA_VL is not set
IG_AIC7XXX_BUILD_FIRMWARE is not set
-------------------------------------------------------------------
2.2.18pre18 with aic7xxx-5.1.31 was solid on this box (the motherboard has
been changed since, though).
-- v --
v@iki.fi
next reply other threads:[~2002-09-20 5:23 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-09-20 5:28 Ville Herva [this message]
2002-09-20 15:37 ` Justin T. Gibbs
2002-09-20 18:19 ` 2.4.19, 2.4.20pre7, problem with aic7xxx driver Stephan von Krawczynski
2002-09-20 19:48 ` Phil Brutsche
2002-09-20 19:56 ` Stephan von Krawczynski
2002-09-23 15:28 ` 2.4.20pre7, aic7xxx-6.2.8: Panic: HOST_MSG_LOOP with invalid SCB 0 Marcelo Tosatti
2002-09-23 17:35 ` Justin T. Gibbs
2002-09-23 16:54 ` Marcelo Tosatti
2002-09-23 6:35 ` Benjamin Herrenschmidt
2002-09-23 21:43 ` Justin T. Gibbs
2002-09-23 7:15 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020920052832.GH41965@niksula.cs.hut.fi \
--to=vherva@niksula.hut.fi \
--cc=gibbs@scsiguy.com \
--cc=jani.forssell@viasys.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®