* ATI/RIVA framebuffer, 2.4.20-pre8 freeze
@ 2002-10-02 3:29 Ivan Gyurdiev
0 siblings, 0 replies; only message in thread
From: Ivan Gyurdiev @ 2002-10-02 3:29 UTC (permalink / raw)
To: LKML
I have two graphics cards listed below (2.4.20-pre5 /proc/pci).
With both framebuffers enabled...
CONFIG_FB_RIVA
CONFIG_FB_ATY
CONFIG_FB_ATY_CT
...the kernel freezes after printing the ATY messages.
With FB_RIVA enabled, and ATY disabled, the framebuffer works.
I've experienced the same problem on earlier 2.4 kernels.
=======================================
Bus 0, device 10, function 0:
VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP (rev
92).
IRQ 9.
Master Capable. Latency=32. Min Gnt=8.
Prefetchable 32 bit memory at 0xde000000 [0xdeffffff].
I/O at 0xdc00 [0xdcff].
Non-prefetchable 32 bit memory at 0xe0000000 [0xe0000fff].
Bus 1, device 0, function 0:
VGA compatible controller: nVidia Corporation NV20 [GeForce3 Ti200] (rev
163 ).
IRQ 5.
Master Capable. Latency=248. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xdc000000 [0xdcffffff].
Prefetchable 32 bit memory at 0xd4000000 [0xd7ffffff].
Prefetchable 32 bit memory at 0xd8000000 [0xd807ffff].
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-10-02 3:23 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-10-02 3:29 ATI/RIVA framebuffer, 2.4.20-pre8 freeze Ivan Gyurdiev
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®