* Re: PCI: Failed to allocate resource in 2.4.20pre10 and 11 - broken IRQ-router?
2002-10-22 12:48 PCI: Failed to allocate resource in 2.4.20pre10 and 11 - broken IRQ-router? Andreas Hartmann
@ 2002-10-22 12:14 ` Alan Cox
2002-10-22 12:48 ` Ivan Kokshaysky
1 sibling, 0 replies; 6+ messages in thread
From: Alan Cox @ 2002-10-22 12:14 UTC (permalink / raw)
To: Andreas Hartmann; +Cc: Linux Kernel Mailing List
That looks like the PCI changes then rather than the IDE ones
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: PCI: Failed to allocate resource in 2.4.20pre10 and 11 - broken IRQ-router?
@ 2002-10-22 12:48 Andreas Hartmann
2002-10-22 12:14 ` Alan Cox
2002-10-22 12:48 ` Ivan Kokshaysky
0 siblings, 2 replies; 6+ messages in thread
From: Andreas Hartmann @ 2002-10-22 12:48 UTC (permalink / raw)
To: Alan Cox <alan; +Cc: linux-kernel
Am 22.10.2002 11:10:03 schrieb Alan Cox :
> On Tue, 2002-10-22 at 07:28, Andreas Hartmann wrote:
> > Hello all,
> >
> > I'm using an IBM Thinkpad T21 with a dockingstation, which has an own
> additional
> > ide-controller. At this controller, one more ATA-IDE hd is connected
> (/dev/hde).
> > dmesg with kernel 2.4.19 looks like this (correct version):
>
> Please send me an lspci -v. Im curious about this one because the dock
> on my TP600 the IDE does work, although we dont yet support hot plugging
> IDE.
Hot plugging would be really nice - but you need a program to switch on or off
the locking of the docking station too.
> Also try 2.4.19 with the config you had in the working kernel - you
> have explicit CMD64x in one but not the other
CMD64x is switched off in *both* config-files of the kernel. I switched it on in
the 2.4.20pre10 kernel, but the result is the same.
lspci -v (2.4.19)
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
Flags: bus master, medium devsel, latency 64
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: f0000000-f7ffffff
00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
Subsystem: IBM: Unknown device 0130
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=04, sec-latency=176
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
16-bit legacy interface ports at 0001
00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
Subsystem: IBM: Unknown device 0130
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at 50100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=05, subordinate=07, sec-latency=176
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
16-bit legacy interface ports at 0001
00:03.0 Communication controller: Lucent Microelectronics WinModem 56k (rev 01)
Subsystem: AMBIT Microsystem Corp. Lucent Win Modem
Flags: medium devsel, IRQ 11
Memory at e8101000 (32-bit, non-prefetchable) [size=256]
I/O ports at 1c00 [size=8]
I/O ports at 1800 [size=256]
Capabilities: [f8] Power Management version 2
00:04.0 PCI bridge: Texas Instruments: Unknown device ac22 (prog-if 01 [Subtractive decode])
Flags: bus master, medium devsel, latency 64
Bus: primary=00, secondary=08, subordinate=0e, sec-latency=68
I/O behind bridge: 00000000-00000fff
Memory behind bridge: 00000000-000fffff
Prefetchable memory behind bridge: 00000000-000fffff
Capabilities: [80] Power Management version 1
00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
Subsystem: IBM: Unknown device 0153
Flags: slow devsel, IRQ 11
Memory at e8100000 (32-bit, non-prefetchable) [size=4K]
Memory at e8000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 2
00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Flags: bus master, medium devsel, latency 0
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Flags: bus master, medium devsel, latency 64
I/O ports at 1c10 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Flags: medium devsel, IRQ 11
I/O ports at 1c20 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
Flags: medium devsel, IRQ 9
01:00.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev 13) (prog-if 00 [VGA])
Subsystem: IBM: Unknown device 017f
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 11
Memory at f0000000 (32-bit, non-prefetchable) [size=128M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Capabilities: [80] AGP version 1.0
08:01.0 IDE interface: CMD Technology Inc PCI0648 (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: CMD Technology Inc PCI0648
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at 2020 [size=8]
I/O ports at 2014 [size=4]
I/O ports at 2018 [size=8]
I/O ports at 2010 [size=4]
I/O ports at 2000 [size=16]
Capabilities: [60] Power Management version 1
08:02.0 CardBus bridge: Texas Instruments PCI1420
Subsystem: IBM: Unknown device 0148
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at 52000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=08, secondary=09, subordinate=0b, sec-latency=128
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
16-bit legacy interface ports at 0001
08:02.1 CardBus bridge: Texas Instruments PCI1420
Subsystem: IBM: Unknown device 0148
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at 53000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=08, secondary=0c, subordinate=0e, sec-latency=128
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
16-bit legacy interface ports at 0001
lspci -v (2.4.20pre10)
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
Flags: bus master, medium devsel, latency 64
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: f0000000-f7ffffff
00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
Subsystem: IBM: Unknown device 0130
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=04, sec-latency=176
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
16-bit legacy interface ports at 0001
00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
Subsystem: IBM: Unknown device 0130
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at 50100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=05, subordinate=07, sec-latency=176
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
16-bit legacy interface ports at 0001
00:03.0 Communication controller: Lucent Microelectronics WinModem 56k (rev 01)
Subsystem: AMBIT Microsystem Corp. Lucent Win Modem
Flags: medium devsel, IRQ 11
Memory at e8101000 (32-bit, non-prefetchable) [size=256]
I/O ports at 1c00 [size=8]
I/O ports at 1800 [size=256]
Capabilities: [f8] Power Management version 2
00:04.0 PCI bridge: Texas Instruments: Unknown device ac22 (prog-if 01 [Subtractive decode])
Flags: bus master, medium devsel, latency 64
Bus: primary=00, secondary=08, subordinate=0e, sec-latency=68
I/O behind bridge: 00000000-00000fff
Memory behind bridge: 00000000-000fffff
Prefetchable memory behind bridge: 00000000-000fffff
Capabilities: [80] Power Management version 1
00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
Subsystem: IBM: Unknown device 0153
Flags: slow devsel, IRQ 11
Memory at e8100000 (32-bit, non-prefetchable) [size=4K]
Memory at e8000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 2
00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Flags: bus master, medium devsel, latency 0
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Flags: bus master, medium devsel, latency 64
I/O ports at 1c10 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Flags: medium devsel, IRQ 11
I/O ports at 1c20 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
Flags: medium devsel, IRQ 9
01:00.0 VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev 13) (prog-if 00 [VGA])
Subsystem: IBM: Unknown device 017f
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 11
Memory at f0000000 (32-bit, non-prefetchable) [size=128M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Capabilities: [80] AGP version 1.0
08:01.0 IDE interface: CMD Technology Inc PCI0648 (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: CMD Technology Inc PCI0648
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at <ignored> [size=8]
I/O ports at <ignored> [size=4]
I/O ports at <ignored> [size=8]
I/O ports at <ignored> [size=4]
I/O ports at <ignored> [size=16]
Capabilities: [60] Power Management version 1
08:02.0 CardBus bridge: Texas Instruments PCI1420
Subsystem: IBM: Unknown device 0148
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at <ignored> (32-bit, non-prefetchable) [size=4K]
Bus: primary=08, secondary=09, subordinate=0b, sec-latency=128
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
16-bit legacy interface ports at 0001
08:02.1 CardBus bridge: Texas Instruments PCI1420
Subsystem: IBM: Unknown device 0148
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at <ignored> (32-bit, non-prefetchable) [size=4K]
Bus: primary=08, secondary=0c, subordinate=0e, sec-latency=128
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
16-bit legacy interface ports at 0001
diff -u 2.4.19 2.4.20pre10
--- 2.4.19 Tue Oct 22 13:09:03 2002
+++ 2.4.20pre10 Tue Oct 22 13:07:41 2002
@@ -74,17 +74,17 @@
08:01.0 IDE interface: CMD Technology Inc PCI0648 (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: CMD Technology Inc PCI0648
Flags: bus master, medium devsel, latency 64, IRQ 11
- I/O ports at 2020 [size=8]
- I/O ports at 2014 [size=4]
- I/O ports at 2018 [size=8]
- I/O ports at 2010 [size=4]
- I/O ports at 2000 [size=16]
+ I/O ports at <ignored> [size=8]
+ I/O ports at <ignored> [size=4]
+ I/O ports at <ignored> [size=8]
+ I/O ports at <ignored> [size=4]
+ I/O ports at <ignored> [size=16]
Capabilities: [60] Power Management version 1
08:02.0 CardBus bridge: Texas Instruments PCI1420
Subsystem: IBM: Unknown device 0148
Flags: bus master, medium devsel, latency 64, IRQ 11
- Memory at 52000000 (32-bit, non-prefetchable) [size=4K]
+ Memory at <ignored> (32-bit, non-prefetchable) [size=4K]
Bus: primary=08, secondary=09, subordinate=0b, sec-latency=128
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
@@ -93,7 +93,7 @@
08:02.1 CardBus bridge: Texas Instruments PCI1420
Subsystem: IBM: Unknown device 0148
Flags: bus master, medium devsel, latency 64, IRQ 11
- Memory at 53000000 (32-bit, non-prefetchable) [size=4K]
+ Memory at <ignored> (32-bit, non-prefetchable) [size=4K]
Bus: primary=08, secondary=0c, subordinate=0e, sec-latency=128
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
Regards,
Andreas Hartmann
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: PCI: Failed to allocate resource in 2.4.20pre10 and 11 - broken IRQ-router?
2002-10-22 12:48 PCI: Failed to allocate resource in 2.4.20pre10 and 11 - broken IRQ-router? Andreas Hartmann
2002-10-22 12:14 ` Alan Cox
@ 2002-10-22 12:48 ` Ivan Kokshaysky
1 sibling, 0 replies; 6+ messages in thread
From: Ivan Kokshaysky @ 2002-10-22 12:48 UTC (permalink / raw)
To: Andreas Hartmann; +Cc: Alan Cox <alan, linux-kernel
On Tue, Oct 22, 2002 at 01:48:45PM +0100, Andreas Hartmann wrote:
> CMD64x is switched off in *both* config-files of the kernel. I switched it on in
> the 2.4.20pre10 kernel, but the result is the same.
Ugh. It's a silly typo in the "transparent bridges" patch.
Thanks for the report, Andreas.
Ivan.
--- 2.4.20p11/drivers/pci/pci.c Tue Oct 22 16:27:00 2002
+++ linux/drivers/pci/pci.c Tue Oct 22 16:37:18 2002
@@ -1386,7 +1386,7 @@ int pci_setup_device(struct pci_dev * de
/* The PCI-to-PCI bridge spec requires that subtractive
decoding (i.e. transparent) bridge must have programming
interface code of 0x01. */
- dev->transparent = ((class & 0xff) == 1);
+ dev->transparent = ((dev->class & 0xff) == 1);
pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
break;
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: PCI: Failed to allocate resource in 2.4.20pre10 and 11 - broken IRQ-router?
[not found] ` <fa.j9607mv.185k5hc@ifi.uio.no>
@ 2002-10-22 17:43 ` Andreas Hartmann
0 siblings, 0 replies; 6+ messages in thread
From: Andreas Hartmann @ 2002-10-22 17:43 UTC (permalink / raw)
To: linux-kernel
Ivan Kokshaysky wrote:
> On Tue, Oct 22, 2002 at 01:48:45PM +0100, Andreas Hartmann wrote:
>> CMD64x is switched off in *both* config-files of the kernel. I switched
>> it on in the 2.4.20pre10 kernel, but the result is the same.
>
> Ugh. It's a silly typo in the "transparent bridges" patch.
The patch is working fine :-)!
Thank you Ivan,
regards,
Andreas Hartmann
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: PCI: Failed to allocate resource in 2.4.20pre10 and 11 - broken IRQ-router?
2002-10-22 6:28 Andreas Hartmann
@ 2002-10-22 10:10 ` Alan Cox
0 siblings, 0 replies; 6+ messages in thread
From: Alan Cox @ 2002-10-22 10:10 UTC (permalink / raw)
To: Andreas Hartmann; +Cc: Linux Kernel Mailing List
On Tue, 2002-10-22 at 07:28, Andreas Hartmann wrote:
> Hello all,
>
> I'm using an IBM Thinkpad T21 with a dockingstation, which has an own additional
> ide-controller. At this controller, one more ATA-IDE hd is connected (/dev/hde).
> dmesg with kernel 2.4.19 looks like this (correct version):
Please send me an lspci -v. Im curious about this one because the dock
on my TP600 the IDE does work, although we dont yet support hot plugging
IDE. Also try 2.4.19 with the config you had in the working kernel - you
have explicit CMD64x in one but not the other
^ permalink raw reply [flat|nested] 6+ messages in thread
* PCI: Failed to allocate resource in 2.4.20pre10 and 11 - broken IRQ-router?
@ 2002-10-22 6:28 Andreas Hartmann
2002-10-22 10:10 ` Alan Cox
0 siblings, 1 reply; 6+ messages in thread
From: Andreas Hartmann @ 2002-10-22 6:28 UTC (permalink / raw)
To: linux-kernel
Hello all,
I'm using an IBM Thinkpad T21 with a dockingstation, which has an own additional
ide-controller. At this controller, one more ATA-IDE hd is connected (/dev/hde).
dmesg with kernel 2.4.19 looks like this (correct version):
Linux version 2.4.19 (root@d172343) (gcc version 2.95.3 20010315 (SuSE)) #6 Sam Sep 21 14:45:45 CEST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fffec00 (ACPI data)
BIOS-e820: 000000000fffec00 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
255MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
IBM machine detected. Enabling interrupts during APM calls.
Kernel command line: auto BOOT_IMAGE=2419 ro root=303 BOOT_FILE=/boot/vmlinuz-2.4.19 hdc=cdrom pci=biosirq init 1
ide_setup: hdc=cdrom
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Initializing CPU#0
Detected 796.544 MHz processor.
Console: colour VGA+ 80x50
Calibrating delay loop... 1589.24 BogoMIPS
Memory: 257344k/262080k available (858k kernel code, 4348k reserved, 348k data, 84k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1c10-0x1c17, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1c18-0x1c1f, BIOS settings: hdc:DMA, hdd:pio
CMD648: IDE controller on PCI bus 08 dev 08
CMD648: detected chipset, but driver not compiled in!
PCI: Found IRQ 11 for device 08:01.0
PCI: Sharing IRQ 11 with 00:02.1
CMD648: chipset revision 1
CMD648: 100% native mode on irq 11
ide2: BM-DMA at 0x2000-0x2007, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0x2008-0x200f, BIOS settings: hdg:pio, hdh:pio
hda: IBM-DJSA-220, ATA DISK drive
hdc: CD-224E, ATAPI CD/DVD-ROM drive
hde: IC25N030ATDA04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0x2020-0x2027,0x2016 on irq 11
hda: 39070080 sectors (20004 MB) w/1874KiB Cache, CHS=2584/240/63
hde: 58605120 sectors (30006 MB) w/1806KiB Cache, CHS=62016/15/63
Partition check:
hda: hda1 hda2 < hda5 hda6 > hda3 hda4
hde: hde1
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
reiserfs: checking transaction log (device 03:03) ...
Using r5 hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 84k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Adding Swap: 287272k swap-space (priority 42)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
If I use 2.4.20pre10 or 11, the kernel can't find the additional ide-controller in the dockingstation no more.
The errormessage is:
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
PCI: Cannot allocate resource region 0 of device 08:01.0
PCI: Cannot allocate resource region 1 of device 08:01.0
PCI: Cannot allocate resource region 2 of device 08:01.0
PCI: Cannot allocate resource region 3 of device 08:01.0
PCI: Cannot allocate resource region 4 of device 08:01.0
PCI: Cannot allocate resource region 0 of device 08:02.0
PCI: Cannot allocate resource region 0 of device 08:02.1
PCI: Failed to allocate resource 4(0-f) for 08:01.0
PCI: Failed to allocate resource 0(0-fff) for 08:02.0
PCI: Failed to allocate resource 0(0-fff) for 08:02.1
dmesg all in one looks like this:
Linux version 2.4.20-pre10 (root@d172343) (gcc version 2.95.3 20010315 (SuSE)) #1 Son Okt 13 09:06:10 CEST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fffec00 (ACPI data)
BIOS-e820: 000000000fffec00 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
IBM machine detected. Enabling interrupts during APM calls.
Kernel command line: auto BOOT_IMAGE=2420pre10 ro root=303 BOOT_FILE=/boot/vmlinuz-2.4.20pre10 hdc=cdrom pci=biosirq init 1
ide_setup: hdc=cdrom
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Initializing CPU#0
Detected 796.552 MHz processor.
Console: colour VGA+ 80x50
Calibrating delay loop... 1589.24 BogoMIPS
Memory: 257328k/262080k available (854k kernel code, 4364k reserved, 215k data, 236k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
PCI: Cannot allocate resource region 0 of device 08:01.0
PCI: Cannot allocate resource region 1 of device 08:01.0
PCI: Cannot allocate resource region 2 of device 08:01.0
PCI: Cannot allocate resource region 3 of device 08:01.0
PCI: Cannot allocate resource region 4 of device 08:01.0
PCI: Cannot allocate resource region 0 of device 08:02.0
PCI: Cannot allocate resource region 0 of device 08:02.1
PCI: Failed to allocate resource 4(0-f) for 08:01.0
PCI: Failed to allocate resource 0(0-fff) for 08:02.0
PCI: Failed to allocate resource 0(0-fff) for 08:02.1
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1c10-0x1c17, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1c18-0x1c1f, BIOS settings: hdc:DMA, hdd:pio
CMD648: IDE controller on PCI bus 08 dev 08
CMD648: detected chipset, but driver not compiled in!
PCI: Device 08:01.0 not available because of resource collisions
PCI: Device 08:01.0 not available because of resource collisions
CMD648: (ide_setup_pci_device:) Could not enable device.
hda: IBM-DJSA-220, ATA DISK drive
hdc: CD-224E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39070080 sectors (20004 MB) w/1874KiB Cache, CHS=2584/240/63
Partition check:
hda: hda1 hda2 < hda5 hda6 > hda3 hda4
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
reiserfs: checking transaction log (device 03:03) ...
Using r5 hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 236k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Adding Swap: 287272k swap-space (priority 42)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
blk: queue c02729c4, I/O limit 4095Mb (mask 0xffffffff)
Kind regards,
Andreas Hartmann
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2002-10-22 17:33 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-10-22 12:48 PCI: Failed to allocate resource in 2.4.20pre10 and 11 - broken IRQ-router? Andreas Hartmann
2002-10-22 12:14 ` Alan Cox
2002-10-22 12:48 ` Ivan Kokshaysky
[not found] <fa.mq6dl3v.5lgkh3@ifi.uio.no>
[not found] ` <fa.j9607mv.185k5hc@ifi.uio.no>
2002-10-22 17:43 ` Andreas Hartmann
-- strict thread matches above, loose matches on Subject: below --
2002-10-22 6:28 Andreas Hartmann
2002-10-22 10:10 ` Alan Cox
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®