ohci no devices after suspend/resume

ohci no devices after suspend/resume

[Florian Lohoff]

[-- Attachment #1: Type: text/plain, Size: 3746 bytes --]


Hi,
i am having the problem that sometimes after suspend/resume on a
Sony Vaio C1MHP the ohci usb driver does not discover new devices
anymore. I unload the module before suspend so i did not expect any
problems.

Linux paradigm 2.4.19 #1 Thu Oct 31 13:37:56 CET 2002 i586 unknown

2.4.19 + swsusp + acpi backport


dmesg output from loading the driver after a suspend:
usb-ohci.c: USB OHCI at membase 0xc00e0000, IRQ 9
usb-ohci.c: usb-00:14.0, Acer Laboratories Inc. [ALi] USB 1.1 Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
usb.c: kmalloc IF ca2fe2a0, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: c00e0000
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface ca2fe2a0
usb.c: kusbd: /sbin/hotplug add 1


/proc/bus/usb/devices
T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB OHCI Root Hub
S:  SerialNumber=c00e0000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB OHCI Root Hub
S:  SerialNumber=d005e000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

lspci -vv
[...]
00:0f.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03) (prog-if 10 [OHCI])
	Subsystem: Sony Corporation: Unknown device 80ec
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (20000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at e8016000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[...]
00:14.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03) (prog-if 10 [OHCI])
	Subsystem: Sony Corporation: Unknown device 80ec
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (20000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at 000e0000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-


Multiple remove/insert loops dont solve the problem. Something seems to
stay uninitialized ..

Flo
-- 
Florian Lohoff                  flo@rfc822.org             +49-5201-669912
                        Heisenberg may have been here.

[-- Attachment #2: Type: application/pgp-signature, Size: 232 bytes --]