* i7500 and IRQ assignment
@ 2002-11-22 16:04 Emiliano Gabrielli
0 siblings, 0 replies; 5+ messages in thread
From: Emiliano Gabrielli @ 2002-11-22 16:04 UTC (permalink / raw)
To: linux-kernel
I can find a patch for the i7500 chipset IRQ problem.
Is it still unsolved ? ... I have a full custom PCI device that does not
receive an IRQ...
Any suggestion ??
tnx in advance
--
Emiliano Gabrielli
dip. di Fisica
2° Università di Roma "Tor Vergata"
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: i7500 and IRQ assignment
@ 2002-11-22 18:25 Manish Lachwani
2002-11-25 14:16 ` Emiliano Gabrielli
0 siblings, 1 reply; 5+ messages in thread
From: Manish Lachwani @ 2002-11-22 18:25 UTC (permalink / raw)
To: 'Emiliano Gabrielli', linux-kernel
I experienced the same problem with Supermicro and Intel E7500 board. Look
on
http://sourceforge.net/projects/lse
for the apic routing patch. This patch, when applied, will solve the issue
-----Original Message-----
From: Emiliano Gabrielli [mailto:Emiliano.Gabrielli@roma2.infn.it]
Sent: Friday, November 22, 2002 8:05 AM
To: linux-kernel@vger.kernel.org
Subject: i7500 and IRQ assignment
I can find a patch for the i7500 chipset IRQ problem.
Is it still unsolved ? ... I have a full custom PCI device that does not
receive an IRQ...
Any suggestion ??
tnx in advance
--
Emiliano Gabrielli
dip. di Fisica
2° Università di Roma "Tor Vergata"
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: i7500 and IRQ assignment
2002-11-22 18:25 Manish Lachwani
@ 2002-11-25 14:16 ` Emiliano Gabrielli
2002-11-25 15:18 ` Steffen Persvold
0 siblings, 1 reply; 5+ messages in thread
From: Emiliano Gabrielli @ 2002-11-25 14:16 UTC (permalink / raw)
To: linux-kernel; +Cc: Manish Lachwani
On 19:25, venerdì 22 novembre 2002, Manish Lachwani wrote:
> I experienced the same problem with Supermicro and Intel E7500 board. Look
> on
>
> http://sourceforge.net/projects/lse
>
> for the apic routing patch. This patch, when applied, will solve the issue
uhmm I have tried to apply it against the 2.4.18-18.7.1xsmp by RH, but of sure
it gave conflicts... I wan not able to resolve them by hand, in paticular I
can't find the funcion/macro "processor()"...
Has this patch been applied agaist a more recent kernel yet ?!? 2.4.18 is quit
out of date, expecially for the APIC-related problems...
My final goal is only to have an IRQ assigne to my custom PCI device by the
SuperMicro P4DP6 MB (e7500), with HT enabled
tnx in advance
--
Emiliano Gabrielli
dip. di Fisica
2° Università di Roma "Tor Vergata"
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: i7500 and IRQ assignment
2002-11-25 14:16 ` Emiliano Gabrielli
@ 2002-11-25 15:18 ` Steffen Persvold
2002-11-25 15:43 ` Zwane Mwaikambo
0 siblings, 1 reply; 5+ messages in thread
From: Steffen Persvold @ 2002-11-25 15:18 UTC (permalink / raw)
To: Emiliano Gabrielli; +Cc: linux-kernel, Manish Lachwani, mingo
On Mon, 25 Nov 2002, Emiliano Gabrielli wrote:
> On 19:25, venerdì 22 novembre 2002, Manish Lachwani wrote:
> > I experienced the same problem with Supermicro and Intel E7500 board. Look
> > on
> >
> > http://sourceforge.net/projects/lse
> >
> > for the apic routing patch. This patch, when applied, will solve the issue
>
> uhmm I have tried to apply it against the 2.4.18-18.7.1xsmp by RH, but of sure
> it gave conflicts... I wan not able to resolve them by hand, in paticular I
> can't find the funcion/macro "processor()"...
>
> Has this patch been applied agaist a more recent kernel yet ?!? 2.4.18 is quit
> out of date, expecially for the APIC-related problems...
>
> My final goal is only to have an IRQ assigne to my custom PCI device by the
> SuperMicro P4DP6 MB (e7500), with HT enabled
>
2.4.20-rc2 or -rc3 work fine on my E7500 boards. I've appiled the
irqbalance patch from Ingo Molnar though. It gives me better interrupt
latency compared to the APIC routing patch (with GbE it is ~10us faster on
ping-pong/2 tests).
Regards,
--
Steffen Persvold | Scali AS
mailto:sp@scali.com | http://www.scali.com
Tel: (+47) 2262 8950 | Olaf Helsets vei 6
Fax: (+47) 2262 8951 | N0621 Oslo, NORWAY
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: i7500 and IRQ assignment
2002-11-25 15:18 ` Steffen Persvold
@ 2002-11-25 15:43 ` Zwane Mwaikambo
0 siblings, 0 replies; 5+ messages in thread
From: Zwane Mwaikambo @ 2002-11-25 15:43 UTC (permalink / raw)
To: Steffen Persvold; +Cc: Emiliano Gabrielli, linux-kernel, Manish Lachwani, mingo
On Mon, 25 Nov 2002, Steffen Persvold wrote:
> 2.4.20-rc2 or -rc3 work fine on my E7500 boards. I've appiled the
> irqbalance patch from Ingo Molnar though. It gives me better interrupt
> latency compared to the APIC routing patch (with GbE it is ~10us faster on
> ping-pong/2 tests).
How does IRQ affinity fair with respect to your interrupt latencies?
Zwane
--
function.linuxpower.ca
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2002-11-25 15:33 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-11-22 16:04 i7500 and IRQ assignment Emiliano Gabrielli
2002-11-22 18:25 Manish Lachwani
2002-11-25 14:16 ` Emiliano Gabrielli
2002-11-25 15:18 ` Steffen Persvold
2002-11-25 15:43 ` Zwane Mwaikambo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®