* Re: One more change pushed to bk tree
[not found] ` <20021122222459.GC18664@redhat.com>
@ 2002-11-22 23:43 ` Doug Ledford
0 siblings, 0 replies; only message in thread
From: Doug Ledford @ 2002-11-22 23:43 UTC (permalink / raw)
To: Linus Torvalds, Linux Kernel Mailing List, Linux Scsi Mailing List
[-- Attachment #1: Type: text/plain, Size: 1214 bytes --]
On Fri, Nov 22, 2002 at 05:24:59PM -0500, Doug Ledford wrote:
> On Fri, Nov 22, 2002 at 01:36:03PM -0500, Doug Ledford wrote:
> > Like last time, this has been through a full compile test, but not a boot
> > test. I'm heading up to the office next so the boot test will come
> > shortly.
>
> BTW, boot and run tests were successful. No I'm trying to isolate why
> certain modules blow up when you load them, unload them, then reload them.
> Right now, the aic7xxx_old, sd_mod, and scsi_mod modules are working. The
> st module is blowing chunks. I haven't tried sr_mod yet. I also haven't
> tried any other lldd modules yet.
>
> Anyway, back to hacking st.c
st.c problem solved. At this point, these changes are ready for sucking
up by Linus.
bk pull bk://linux-scsi.bkbits.net/scsi-dledford
when you have network connectivity again Linus ;-)
There are two more new Changesets at the top of the changeset list
relative to my last email, plus the tree has been merged with 2.4.49
since my last email. The total local changeset list is attached.
--
Doug Ledford <dledford@redhat.com> 919-754-3700 x44233
Red Hat, Inc.
1801 Varsity Dr.
Raleigh, NC 27606
[-- Attachment #2: changes.list --]
[-- Type: text/plain, Size: 5782 bytes --]
ChangeSet@1.855, 2002-11-22 18:26:02-05:00, dledford@aladin.rdu.redhat.com
fs/proc/inode.c: Make proc use new module loader semantics so that
touching a /proc/* file doesn't pin a module in memory
ChangeSet@1.854, 2002-11-22 18:25:05-05:00, dledford@aladin.rdu.redhat.com
st.c: Clean up init failure paths
Fix the detach code so it doesn't call sysfs unregister with
a lock held
ChangeSet@1.853, 2002-11-22 17:53:11-05:00, dledford@flossy.devel.redhat.com
Merge bk://linux.bkbits.net/linux-2.5
into flossy.devel.redhat.com:/usr/local/home/dledford/bk/linus-2.5
ChangeSet@1.852, 2002-11-22 12:59:10-05:00, dledford@dledford.theledfords.org
Convert from host->host_queue to host->my_devices list usage
Add in usage of new same_target_siblings list
Add scsi_release_commandblocks() call to scsi_free_sdev()
Make all scsi device freeing use scsi_free_sdev()
ChangeSet@1.851, 2002-11-22 00:36:31-05:00, dledford@dledford.theledfords.org
scsi: Update lldd API to slave_alloc/slave_configure/slave_destroy interface
instead of slave_attach/slave_detach interface. Change all users
of existing interface to new interface, update scan code for new
device attachement semantics
ChangeSet@1.842.29.10, 2002-11-21 11:59:45-06:00, patmans@us.ibm.com
[PATCH] cleanup code for /proc add/remove single device
On Thu, Nov 21, 2002 at 02:23:14AM +0100, Christoph Hellwig wrote:
> two new helpers in scsi_scan.c: scsi_add_single_device and
> scsi_remove_single_device that do all hard work. Thanks to
> beeing in scsi_scan.c and using proper helpers they're a lot
> smaller and cleaner.
>
>
> --- 1.44/drivers/scsi/scsi.h Sun Nov 17 16:44:35 2002
> +++ edited/drivers/scsi/scsi.h Thu Nov 21 01:05:39 2002
> -
> - err = -ENOSYS;
> - if (sdev)
> - goto out; /* We do not yet support unplugging */
> -
> - scan_scsis(shost, 1, channel, id, lun);
> - err = length;
> - goto out;
> - }
> + err = scsi_add_single_device(host, channel, id, lun);
> + if (err >= 0)
> + err = length;
> ===== drivers/scsi/scsi_scan.c 1.38 vs edited =====
> --- 1.38/drivers/scsi/scsi_scan.c Sun Nov 17 16:47:20 2002
> +++ edited/drivers/scsi/scsi_scan.c Thu Nov 21 01:16:03 2002
> @@ -1862,6 +1862,69 @@
>
> }
>
> +int scsi_add_single_device(uint host, uint channel, uint id, uint lun)
> +{
> + struct scsi_device *sdevscan, *sdev;
> + struct Scsi_Host *shost;
> + int error = -ENODEV;
> +
> + shost = scsi_host_hn_get(host);
> + if (!shost)
> + return -ENODEV;
> + sdev = scsi_find_device(shost, channel, id, lun);
> + if (!sdev)
> + goto out;
> +
James/Christoph -
I had to change the above to a "if (sdev)" per the following patch (against
current scsi-misc-2.5) to get the add to work correctly. Otherwise, this
worked fine.
ChangeSet@1.842.29.9, 2002-11-21 11:59:33-06:00, patmans@us.ibm.com
[PATCH] current scsi-misc-2.5 include files
On Thu, Nov 21, 2002 at 10:12:23AM -0600, J.E.J. Bottomley wrote:
> The scsi-misc-2.5 resync should be done now.
>
> James
Hi -
hardirq.h and init.h were removed from scsi.h. So I had to make the
following changes to compile. I also removed two extraneous includes.
ChangeSet@1.849, 2002-11-21 12:55:58-05:00, dledford@aladin.rdu.redhat.com
Merge aladin.rdu.redhat.com:/usr/local/home/dledford/bk/linus-2.5
into aladin.rdu.redhat.com:/usr/src/2.5
ChangeSet@1.842.29.8, 2002-11-21 10:06:03-06:00, hch@lst.de
[PATCH] turn scsi_allocate_device into readable code
ChangeSet@1.842.29.7, 2002-11-21 10:05:24-06:00, hch@lst.de
[PATCH] some HBA compile warning fixes
ChangeSet@1.842.29.6, 2002-11-21 10:04:47-06:00, hch@lst.de
[PATCH] remove useless includes from scsi.h
ChangeSet@1.842.29.5, 2002-11-21 10:04:16-06:00, hch@lst.de
[PATCH] get rid of scan_scsis
this function was a multiplexer for two very different things, but
with my last patch one of those faded away and only one callers
is left. Simplify it to what's still needed and rename to
scsi_scan_host.
ChangeSet@1.842.29.4, 2002-11-21 10:03:50-06:00, hch@lst.de
[PATCH] cleanup code for /proc add/remove single device
two new helpers in scsi_scan.c: scsi_add_single_device and
scsi_remove_single_device that do all hard work. Thanks to
beeing in scsi_scan.c and using proper helpers they're a lot
smaller and cleaner.
ChangeSet@1.842.29.3, 2002-11-21 10:03:28-06:00, hch@lst.de
[PATCH] make a few more routines private to scsi_lib.c
ChangeSet@1.842.29.2, 2002-11-21 10:03:10-06:00, hch@lst.de
[PATCH] split busy check out of scsi_remove_host
just a simple code cleanup
ChangeSet@1.842.29.1, 2002-11-21 10:02:57-06:00, hch@lst.de
[PATCH] remove unused include in scsi_ioctl.c
This time I explicitly checked for the in_atomic mess..
ChangeSet@1.848, 2002-11-20 19:05:37-05:00, dledford@aladin.rdu.redhat.com
Merge aladin.rdu.redhat.com:/usr/local/home/dledford/bk/linus-2.5
into aladin.rdu.redhat.com:/usr/src/2.5
ChangeSet@1.846.1.1, 2002-11-20 19:05:09-05:00, dledford@aladin.rdu.redhat.com
scsi.c, scsi.h, scsi_syms.c, aic7xxx_old: add new function to track queue
full events at the mid layer instead of at the low level device
driver
ChangeSet@1.845, 2002-11-19 17:07:50-05:00, dledford@flossy.devel.redhat.com
Merge bk://linux.bkbits.net/linux-2.5
into flossy.devel.redhat.com:/usr/local/home/dledford/bk/linus-2.5
ChangeSet@1.825.7.2, 2002-11-17 22:09:07-05:00, dledford@aladin.rdu.redhat.com
aic7xxx_old: update biosparam function with the (ugly) detail that
cylinder values > 65535 get truncated
ChangeSet@1.825.7.1, 2002-11-17 18:57:50-05:00, dledford@aladin.rdu.redhat.com
aic7xxx_old: fix up the biosparam function to do 64bit math safely
^ permalink raw reply [flat|nested] only message in thread