* [PATCH] linux-2.5.49 - Watchdog drivers
@ 2002-11-23 23:31 Wim Van Sebroeck
2002-11-25 12:23 ` Dave Jones
0 siblings, 1 reply; 2+ messages in thread
From: Wim Van Sebroeck @ 2002-11-23 23:31 UTC (permalink / raw)
To: torvalds, davej; +Cc: linux-kernel, Matt_Domsch, rob
Hi Linus, Dave,
included the patch for linux-2.5.49 to make the watchdog drivers working again.
Could you apply this to the current tree please?
PS: the patch is also ftp-able at: ftp://medelec.uia.ac.be/pub/linux/kernel-patches/wd-2.5.49-patch
Greetings,
Wim.
diff -urN linux-2.5.49/drivers/char/Makefile linux-2.5.49-watchdog-patch/drivers/char/Makefile
--- linux-2.5.49/drivers/char/Makefile Fri Nov 22 22:41:09 2002
+++ linux-2.5.49-watchdog-patch/drivers/char/Makefile Sun Nov 24 00:00:48 2002
@@ -77,12 +77,11 @@
obj-$(CONFIG_NWFLASH) += nwflash.o
obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
-obj-$(CONFIG_WATCHDOGS) += watchdog/
+obj-$(CONFIG_WATCHDOG) += watchdog/
obj-$(CONFIG_MWAVE) += mwave/
obj-$(CONFIG_AGP) += agp/
obj-$(CONFIG_DRM) += drm/
obj-$(CONFIG_PCMCIA) += pcmcia/
-
# Files generated that shall be removed upon make clean
clean-files := consolemap_deftbl.c defkeymap.c qtronixmap.c
diff -urN linux-2.5.49/drivers/char/i810-tco.h linux-2.5.49-watchdog-patch/drivers/char/i810-tco.h
--- linux-2.5.49/drivers/char/i810-tco.h Fri Nov 22 22:40:52 2002
+++ linux-2.5.49-watchdog-patch/drivers/char/i810-tco.h Thu Jan 1 01:00:00 1970
@@ -1,42 +0,0 @@
-/*
- * i810-tco 0.05: TCO timer driver for i8xx chipsets
- *
- * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights Reserved.
- * http://www.kernelconcepts.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Neither kernel concepts nor Nils Faerber admit liability nor provide
- * warranty for any of this software. This material is provided
- * "AS-IS" and at no charge.
- *
- * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>
- * developed for
- * Jentro AG, Haar/Munich (Germany)
- *
- * TCO timer driver for i8xx chipsets
- * based on softdog.c by Alan Cox <alan@redhat.com>
- *
- * For history and the complete list of supported I/O Controller Hub's
- * see i810-tco.c
- */
-
-
-/*
- * Some address definitions for the i810 TCO
- */
-
-#define TCOBASE ACPIBASE + 0x60 /* TCO base address */
-#define TCO1_RLD TCOBASE + 0x00 /* TCO Timer Reload and Current Value */
-#define TCO1_TMR TCOBASE + 0x01 /* TCO Timer Initial Value */
-#define TCO1_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */
-#define TCO1_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */
-#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */
-#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */
-#define TCO1_CNT TCOBASE + 0x08 /* TCO1 Control Register */
-#define TCO2_CNT TCOBASE + 0x0a /* TCO2 Control Register */
-
-#define SMI_EN ACPIBASE + 0x30 /* SMI Control and Enable Register */
diff -urN linux-2.5.49/drivers/char/watchdog/i810-tco.h linux-2.5.49-watchdog-patch/drivers/char/watchdog/i810-tco.h
--- linux-2.5.49/drivers/char/watchdog/i810-tco.h Thu Jan 1 01:00:00 1970
+++ linux-2.5.49-watchdog-patch/drivers/char/watchdog/i810-tco.h Sun Nov 24 00:23:52 2002
@@ -0,0 +1,42 @@
+/*
+ * i810-tco 0.05: TCO timer driver for i8xx chipsets
+ *
+ * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights Reserved.
+ * http://www.kernelconcepts.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Neither kernel concepts nor Nils Faerber admit liability nor provide
+ * warranty for any of this software. This material is provided
+ * "AS-IS" and at no charge.
+ *
+ * (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>
+ * developed for
+ * Jentro AG, Haar/Munich (Germany)
+ *
+ * TCO timer driver for i8xx chipsets
+ * based on softdog.c by Alan Cox <alan@redhat.com>
+ *
+ * For history and the complete list of supported I/O Controller Hub's
+ * see i810-tco.c
+ */
+
+
+/*
+ * Some address definitions for the i810 TCO
+ */
+
+#define TCOBASE ACPIBASE + 0x60 /* TCO base address */
+#define TCO1_RLD TCOBASE + 0x00 /* TCO Timer Reload and Current Value */
+#define TCO1_TMR TCOBASE + 0x01 /* TCO Timer Initial Value */
+#define TCO1_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */
+#define TCO1_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */
+#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */
+#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */
+#define TCO1_CNT TCOBASE + 0x08 /* TCO1 Control Register */
+#define TCO2_CNT TCOBASE + 0x0a /* TCO2 Control Register */
+
+#define SMI_EN ACPIBASE + 0x30 /* SMI Control and Enable Register */
diff -urN linux-2.5.49/drivers/char/watchdog/wd501p.h linux-2.5.49-watchdog-patch/drivers/char/watchdog/wd501p.h
--- linux-2.5.49/drivers/char/watchdog/wd501p.h Thu Jan 1 01:00:00 1970
+++ linux-2.5.49-watchdog-patch/drivers/char/watchdog/wd501p.h Sun Nov 24 00:24:08 2002
@@ -0,0 +1,91 @@
+/*
+ * Industrial Computer Source WDT500/501 driver for Linux 1.3.x
+ *
+ * (c) Copyright 1995 CymruNET Ltd
+ * Innovation Centre
+ * Singleton Park
+ * Swansea
+ * Wales
+ * UK
+ * SA2 8PP
+ *
+ * http://www.cymru.net
+ *
+ * This driver is provided under the GNU General Public License, incorporated
+ * herein by reference. The driver is provided without warranty or
+ * support.
+ *
+ * Release 0.04.
+ *
+ */
+
+#include <linux/config.h>
+
+#define WDT_COUNT0 (io+0)
+#define WDT_COUNT1 (io+1)
+#define WDT_COUNT2 (io+2)
+#define WDT_CR (io+3)
+#define WDT_SR (io+4) /* Start buzzer on PCI write */
+#define WDT_RT (io+5) /* Stop buzzer on PCI write */
+#define WDT_BUZZER (io+6) /* PCI only: rd=disable, wr=enable */
+#define WDT_DC (io+7)
+
+/* The following are only on the PCI card, they're outside of I/O space on
+ * the ISA card: */
+#define WDT_CLOCK (io+12) /* COUNT2: rd=16.67MHz, wr=2.0833MHz */
+/* inverted opto isolated reset output: */
+#define WDT_OPTONOTRST (io+13) /* wr=enable, rd=disable */
+/* opto isolated reset output: */
+#define WDT_OPTORST (io+14) /* wr=enable, rd=disable */
+/* programmable outputs: */
+#define WDT_PROGOUT (io+15) /* wr=enable, rd=disable */
+
+#define WDC_SR_WCCR 1 /* Active low */
+#define WDC_SR_TGOOD 2
+#define WDC_SR_ISOI0 4
+#define WDC_SR_ISII1 8
+#define WDC_SR_FANGOOD 16
+#define WDC_SR_PSUOVER 32 /* Active low */
+#define WDC_SR_PSUUNDR 64 /* Active low */
+#define WDC_SR_IRQ 128 /* Active low */
+
+#ifndef WDT_IS_PCI
+
+/*
+ * Feature Map 1 is the active high inputs not supported on your card.
+ * Feature Map 2 is the active low inputs not supported on your card.
+ */
+
+#ifdef CONFIG_WDT_501 /* Full board */
+
+#ifdef CONFIG_WDT501_FAN /* Full board, Fan has no tachometer */
+#define FEATUREMAP1 0
+#define WDT_OPTION_MASK (WDIOF_OVERHEAT|WDIOF_POWERUNDER|WDIOF_POWEROVER|WDIOF_EXTERN1|WDIOF_EXTERN2|WDIOF_FANFAULT)
+#else
+#define FEATUREMAP1 WDC_SR_FANGOOD
+#define WDT_OPTION_MASK (WDIOF_OVERHEAT|WDIOF_POWERUNDER|WDIOF_POWEROVER|WDIOF_EXTERN1|WDIOF_EXTERN2)
+#endif
+
+#define FEATUREMAP2 0
+#endif
+
+#ifndef CONFIG_WDT_501
+#define CONFIG_WDT_500
+#endif
+
+#ifdef CONFIG_WDT_500 /* Minimal board */
+#define FEATUREMAP1 (WDC_SR_TGOOD|WDC_SR_FANGOOD)
+#define FEATUREMAP2 (WDC_SR_PSUOVER|WDC_SR_PSUUNDR)
+#define WDT_OPTION_MASK (WDIOF_OVERHEAT)
+#endif
+
+#else
+
+#define FEATUREMAP1 (WDC_SR_TGOOD|WDC_SR_FANGOOD)
+#define FEATUREMAP2 (WDC_SR_PSUOVER|WDC_SR_PSUUNDR)
+#define WDT_OPTION_MASK (WDIOF_OVERHEAT)
+#endif
+
+#ifndef FEATUREMAP1
+#error "Config option not set"
+#endif
diff -urN linux-2.5.49/drivers/char/wd501p.h linux-2.5.49-watchdog-patch/drivers/char/wd501p.h
--- linux-2.5.49/drivers/char/wd501p.h Fri Nov 22 22:40:13 2002
+++ linux-2.5.49-watchdog-patch/drivers/char/wd501p.h Thu Jan 1 01:00:00 1970
@@ -1,91 +0,0 @@
-/*
- * Industrial Computer Source WDT500/501 driver for Linux 1.3.x
- *
- * (c) Copyright 1995 CymruNET Ltd
- * Innovation Centre
- * Singleton Park
- * Swansea
- * Wales
- * UK
- * SA2 8PP
- *
- * http://www.cymru.net
- *
- * This driver is provided under the GNU General Public License, incorporated
- * herein by reference. The driver is provided without warranty or
- * support.
- *
- * Release 0.04.
- *
- */
-
-#include <linux/config.h>
-
-#define WDT_COUNT0 (io+0)
-#define WDT_COUNT1 (io+1)
-#define WDT_COUNT2 (io+2)
-#define WDT_CR (io+3)
-#define WDT_SR (io+4) /* Start buzzer on PCI write */
-#define WDT_RT (io+5) /* Stop buzzer on PCI write */
-#define WDT_BUZZER (io+6) /* PCI only: rd=disable, wr=enable */
-#define WDT_DC (io+7)
-
-/* The following are only on the PCI card, they're outside of I/O space on
- * the ISA card: */
-#define WDT_CLOCK (io+12) /* COUNT2: rd=16.67MHz, wr=2.0833MHz */
-/* inverted opto isolated reset output: */
-#define WDT_OPTONOTRST (io+13) /* wr=enable, rd=disable */
-/* opto isolated reset output: */
-#define WDT_OPTORST (io+14) /* wr=enable, rd=disable */
-/* programmable outputs: */
-#define WDT_PROGOUT (io+15) /* wr=enable, rd=disable */
-
-#define WDC_SR_WCCR 1 /* Active low */
-#define WDC_SR_TGOOD 2
-#define WDC_SR_ISOI0 4
-#define WDC_SR_ISII1 8
-#define WDC_SR_FANGOOD 16
-#define WDC_SR_PSUOVER 32 /* Active low */
-#define WDC_SR_PSUUNDR 64 /* Active low */
-#define WDC_SR_IRQ 128 /* Active low */
-
-#ifndef WDT_IS_PCI
-
-/*
- * Feature Map 1 is the active high inputs not supported on your card.
- * Feature Map 2 is the active low inputs not supported on your card.
- */
-
-#ifdef CONFIG_WDT_501 /* Full board */
-
-#ifdef CONFIG_WDT501_FAN /* Full board, Fan has no tachometer */
-#define FEATUREMAP1 0
-#define WDT_OPTION_MASK (WDIOF_OVERHEAT|WDIOF_POWERUNDER|WDIOF_POWEROVER|WDIOF_EXTERN1|WDIOF_EXTERN2|WDIOF_FANFAULT)
-#else
-#define FEATUREMAP1 WDC_SR_FANGOOD
-#define WDT_OPTION_MASK (WDIOF_OVERHEAT|WDIOF_POWERUNDER|WDIOF_POWEROVER|WDIOF_EXTERN1|WDIOF_EXTERN2)
-#endif
-
-#define FEATUREMAP2 0
-#endif
-
-#ifndef CONFIG_WDT_501
-#define CONFIG_WDT_500
-#endif
-
-#ifdef CONFIG_WDT_500 /* Minimal board */
-#define FEATUREMAP1 (WDC_SR_TGOOD|WDC_SR_FANGOOD)
-#define FEATUREMAP2 (WDC_SR_PSUOVER|WDC_SR_PSUUNDR)
-#define WDT_OPTION_MASK (WDIOF_OVERHEAT)
-#endif
-
-#else
-
-#define FEATUREMAP1 (WDC_SR_TGOOD|WDC_SR_FANGOOD)
-#define FEATUREMAP2 (WDC_SR_PSUOVER|WDC_SR_PSUUNDR)
-#define WDT_OPTION_MASK (WDIOF_OVERHEAT)
-#endif
-
-#ifndef FEATUREMAP1
-#error "Config option not set"
-#endif
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] linux-2.5.49 - Watchdog drivers
2002-11-23 23:31 [PATCH] linux-2.5.49 - Watchdog drivers Wim Van Sebroeck
@ 2002-11-25 12:23 ` Dave Jones
0 siblings, 0 replies; 2+ messages in thread
From: Dave Jones @ 2002-11-25 12:23 UTC (permalink / raw)
To: Wim Van Sebroeck; +Cc: torvalds, davej, linux-kernel, Matt_Domsch, rob
On Sun, Nov 24, 2002 at 12:31:03AM +0100, Wim Van Sebroeck wrote:
> Hi Linus, Dave,
>
> included the patch for linux-2.5.49 to make the watchdog drivers working again.
> Could you apply this to the current tree please?
>
> PS: the patch is also ftp-able at: ftp://medelec.uia.ac.be/pub/linux/kernel-patches/wd-2.5.49-patch
Yup. I screwed up a few things (and actually pushed the wrong tree
into the 'pull' tree for Linus *sigh*)
I'll set about putting things right this afternoon.
Dave
--
| Dave Jones. http://www.codemonkey.org.uk
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-11-25 12:19 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-11-23 23:31 [PATCH] linux-2.5.49 - Watchdog drivers Wim Van Sebroeck
2002-11-25 12:23 ` Dave Jones
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®