Linux Kernel on NCR Worldmark 5100 and 3450 Workstation

Linux Kernel on NCR Worldmark 5100 and 3450 Workstation

[Patrick Finnegan]

Does anyone know anything about getting a Linux kernel to boot on either
of these machines?  The Worldmark 5100 is a massive multiprocessor Pentium
Pro machine with two MCA buses.  The 3450 is a quad-Pentium workstation
with a single MCA bus.

Thanks for any info.

Pat
--
Purdue Universtiy ITAP/RCS
Information Technology at Purdue
Research Computing and Storage
http://www-rcd.cc.purdue.edu

Re: Linux Kernel on NCR Worldmark 5100 and 3450 Workstation

[Andrey Panin]

[-- Attachment #1: Type: text/plain, Size: 575 bytes --]

On Mon, Nov 25, 2002 at 10:45:27PM -0500, Patrick Finnegan wrote:
> Does anyone know anything about getting a Linux kernel to boot on either
> of these machines?  The Worldmark 5100 is a massive multiprocessor Pentium
> Pro machine with two MCA buses.  The 3450 is a quad-Pentium workstation
> with a single MCA bus.

You can ask James Bottomley <james.bottomley@hansenpartnership.com> 
about these machines, may be they have Voyager nature.

-- 
Andrey Panin            | Embedded systems software developer
pazke@orbita1.ru        | PGP key: wwwkeys.eu.pgp.net

[-- Attachment #2: Type: application/pgp-signature, Size: 232 bytes --]

Re: Linux Kernel on NCR Worldmark 5100 and 3450 Workstation

[James Bottomley]

> Does anyone know anything about getting a Linux kernel to boot on
> either of these machines?  The Worldmark 5100 is a massive
> multiprocessor Pentium Pro machine with two MCA buses.  The 3450 is a
> quad-Pentium workstation with a single MCA bus.

The WorldMark was the new name for the voyager systems (I even forgot that 
they changed it).  A (somewhat contorted) boot process is documented here.

The 3450 should work flawlessly as long as it has either a buslogic or D700 
SCSI controller (I use a relative of this, the 3455 for my SCSI development 
work).

The 5100 should work, but you'll have trouble with the Q720 SCSI controller.  
The patches I had to make this card work with the 53c7,8xx driver are defunct 
in 2.5 (although they may work for 2.4).  I had planned to try to leverage 
Richard Hirst's parisc Zalon SCSI work to do this and trick the consistent 
memory allocation routines to use the 2Mb memory window behind the MCA bridge, 
but I haven't even begun that yet.

I'm just starting to look at support for the secondary microchannel in the 
5100---If you follow the mca-sysfs thread on linux-kernel, you'll see all the 
necessary abstractions.  Unfortunately, I don't actually have a machine with 
two MCA busses, only the specs, so I'm flying by simulator only.

The project and its patches are all available here:

http://www.hansenpartnership.com/voyager

James Bottomley