* Re: e7500 and IRQ assignment [not found] ` <059c01c294bb$d1036110$6502a8c0@jeff> @ 2002-11-27 15:06 ` Emiliano Gabrielli 0 siblings, 0 replies; 7+ messages in thread From: Emiliano Gabrielli @ 2002-11-27 15:06 UTC (permalink / raw) To: Jeff Nguyen; +Cc: Linux Kernel, linux-smp On 20:49, lunedì 25 novembre 2002, you wrote: > You should try to disable ACPI in the kernel. That might fix the problem > with the IRQ 0 assignment. > passed noacpi to kernel .. nothing changed with aspi=force I had this: [root@pn2 root]# cat /proc/interrupts CPU0 CPU1 0: 1429 76989 IO-APIC-edge timer 1: 3 0 IO-APIC-edge keyboard 2: 0 0 XT-PIC cascade 8: 1 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-edge acpi 12: 0 0 IO-APIC-edge PS/2 Mouse 14: 597 1861 IO-APIC-edge ide0 15: 2 0 IO-APIC-edge ide1 17: 49 105 IO-APIC-level eth0 NMI: 0 0 LOC: 78333 78332 ERR: 0 MIS: 0 [root@pn2 root]# lspci -vv -s 05:0c.0 -x -b 05:0c.0 Non-VGA unclassified device: Altera Corporation: Unknown device 0005 (rev 02) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 255 Region 0: Memory at fc300000 (32-bit, non-prefetchable) 00: 72 11 05 00 13 01 20 04 02 00 00 00 08 40 00 00 10: 00 00 30 fc 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00 It seem the BIOS cannot succesfully write in the interrupt line register just an opinion: is a problem of my own device or a MB bug ?!?! -- Emiliano Gabrielli dip. di Fisica 2° Università di Roma "Tor Vergata" ^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: i7500 and IRQ assignment @ 2002-11-22 18:25 Manish Lachwani 2002-11-25 14:16 ` Emiliano Gabrielli 0 siblings, 1 reply; 7+ messages in thread From: Manish Lachwani @ 2002-11-22 18:25 UTC (permalink / raw) To: 'Emiliano Gabrielli', linux-kernel I experienced the same problem with Supermicro and Intel E7500 board. Look on http://sourceforge.net/projects/lse for the apic routing patch. This patch, when applied, will solve the issue -----Original Message----- From: Emiliano Gabrielli [mailto:Emiliano.Gabrielli@roma2.infn.it] Sent: Friday, November 22, 2002 8:05 AM To: linux-kernel@vger.kernel.org Subject: i7500 and IRQ assignment I can find a patch for the i7500 chipset IRQ problem. Is it still unsolved ? ... I have a full custom PCI device that does not receive an IRQ... Any suggestion ?? tnx in advance -- Emiliano Gabrielli dip. di Fisica 2° Università di Roma "Tor Vergata" - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: i7500 and IRQ assignment 2002-11-22 18:25 i7500 " Manish Lachwani @ 2002-11-25 14:16 ` Emiliano Gabrielli 2002-11-25 15:18 ` e7500 " Emiliano Gabrielli 0 siblings, 1 reply; 7+ messages in thread From: Emiliano Gabrielli @ 2002-11-25 14:16 UTC (permalink / raw) To: linux-kernel; +Cc: Manish Lachwani On 19:25, venerdì 22 novembre 2002, Manish Lachwani wrote: > I experienced the same problem with Supermicro and Intel E7500 board. Look > on > > http://sourceforge.net/projects/lse > > for the apic routing patch. This patch, when applied, will solve the issue uhmm I have tried to apply it against the 2.4.18-18.7.1xsmp by RH, but of sure it gave conflicts... I wan not able to resolve them by hand, in paticular I can't find the funcion/macro "processor()"... Has this patch been applied agaist a more recent kernel yet ?!? 2.4.18 is quit out of date, expecially for the APIC-related problems... My final goal is only to have an IRQ assigne to my custom PCI device by the SuperMicro P4DP6 MB (e7500), with HT enabled tnx in advance -- Emiliano Gabrielli dip. di Fisica 2° Università di Roma "Tor Vergata" ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: e7500 and IRQ assignment 2002-11-25 14:16 ` Emiliano Gabrielli @ 2002-11-25 15:18 ` Emiliano Gabrielli 2002-11-25 15:41 ` Zwane Mwaikambo 0 siblings, 1 reply; 7+ messages in thread From: Emiliano Gabrielli @ 2002-11-25 15:18 UTC (permalink / raw) To: linux-kernel On 15:16, lunedì 25 novembre 2002, Emiliano Gabrielli wrote: > On 19:25, venerdì 22 novembre 2002, Manish Lachwani wrote: > > I experienced the same problem with Supermicro and Intel E7500 board. > > Look on > > > > http://sourceforge.net/projects/lse > > > > for the apic routing patch. This patch, when applied, will solve the > > issue > > uhmm I have tried to apply it against the 2.4.18-18.7.1xsmp by RH, but of > sure it gave conflicts... I wan not able to resolve them by hand, in > paticular I can't find the funcion/macro "processor()"... > > Has this patch been applied agaist a more recent kernel yet ?!? 2.4.18 is > quit out of date, expecially for the APIC-related problems... > > My final goal is only to have an IRQ assigne to my custom PCI device by the > SuperMicro P4DP6 MB (e7500), with HT enabled > > tnx in advance ok, i'm in desperire. I have just patched a 2.4.19-vanilla with the patch mentioned above and the "irqsharing.patch" by Ingo Molnar ... my machine does NOT work yet !! Here follows a dmesg: ting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU0: Intel(R) XEON(TM) CPU 2.00GHz stepping 04 per-CPU timeslice cutoff: 1462.69 usecs. task migration cache decay timeout: 1 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3986.55 BogoMIPS CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU1: Intel(R) XEON(TM) CPU 2.00GHz stepping 04 Total of 2 processors activated (7948.80 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. Setting 3 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 3 ... ok. Setting 4 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 4 ... ok. Setting 5 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 5 ... ok. Setting 6 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 6 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23, 4-0, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23, 5-0, 5-1, 5-2, 5-3, 5-4, 5-5, 5-6, 5-7, 5-8, 5-9, 5-10, 5-11, 5-12, 5-13, 5-14, 5-15, 5-16, 5-17, 5-18, 5-19, 5-20, 5-21, 5-22, 5-23, 6-0, 6-1, 6-2, 6-3, 6-4, 6-5, 6-6, 6-7, 6-8, 6-9, 6-10, 6-11, 6-12, 6-13, 6-14, 6-15, 6-16, 6-17, 6-18, 6-19, 6-20, 6-21, 6-22, 6-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 20. number of IO-APIC #2 registers: 24. number of IO-APIC #3 registers: 24. number of IO-APIC #4 registers: 24. number of IO-APIC #5 registers: 24. number of IO-APIC #6 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02008000 ....... : physical APIC id: 02 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 002 02 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 003 03 0 0 0 0 0 1 1 71 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 003 03 0 0 0 0 0 1 1 79 0d 003 03 0 0 0 0 0 1 1 81 0e 003 03 0 0 0 0 0 1 1 89 0f 003 03 0 0 0 0 0 1 1 91 10 003 03 1 1 0 1 0 1 1 99 11 003 03 1 1 0 1 0 1 1 A1 12 003 03 1 1 0 1 0 1 1 A9 13 003 03 1 1 0 1 0 1 1 B1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #3...... .... register #00: 03000000 ....... : physical APIC id: 03 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 03000000 ....... : arbitration: 03 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 [cut] ... Best regards, -- Emiliano Gabrielli dip. di Fisica 2° Università di Roma "Tor Vergata" ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: e7500 and IRQ assignment 2002-11-25 15:18 ` e7500 " Emiliano Gabrielli @ 2002-11-25 15:41 ` Zwane Mwaikambo 2002-11-25 18:34 ` Emiliano Gabrielli 0 siblings, 1 reply; 7+ messages in thread From: Zwane Mwaikambo @ 2002-11-25 15:41 UTC (permalink / raw) To: Emiliano Gabrielli; +Cc: linux-kernel On Mon, 25 Nov 2002, Emiliano Gabrielli wrote: > number of MP IRQ sources: 20. > number of IO-APIC #2 registers: 24. > number of IO-APIC #3 registers: 24. > number of IO-APIC #4 registers: 24. > number of IO-APIC #5 registers: 24. > number of IO-APIC #6 registers: 24. > testing the IO APIC....................... Out of curiosity, does this box really have 5 IOAPICs? Zwane -- function.linuxpower.ca ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: e7500 and IRQ assignment 2002-11-25 15:41 ` Zwane Mwaikambo @ 2002-11-25 18:34 ` Emiliano Gabrielli 2002-11-25 18:41 ` Emiliano Gabrielli 2002-11-25 19:33 ` Zwane Mwaikambo 0 siblings, 2 replies; 7+ messages in thread From: Emiliano Gabrielli @ 2002-11-25 18:34 UTC (permalink / raw) To: Zwane Mwaikambo; +Cc: linux-kernel On 16:41, lunedì 25 novembre 2002, Zwane Mwaikambo wrote: > On Mon, 25 Nov 2002, Emiliano Gabrielli wrote: > > number of MP IRQ sources: 20. > > number of IO-APIC #2 registers: 24. > > number of IO-APIC #3 registers: 24. > > number of IO-APIC #4 registers: 24. > > number of IO-APIC #5 registers: 24. > > number of IO-APIC #6 registers: 24. > > testing the IO APIC....................... > > Out of curiosity, does this box really have 5 IOAPICs? > > Zwane no of course, but something seems to be buggy... .. nothing changed ;(( I have patched last 2.4.20-rc3 with Ingo patch (irqsharing.patch) or/and apic_route-2.4.18.patch ... patch applies with no problems but no change... I have downloaded the prepatched kernel from www.aslab.com (linux-2.4.19-1) (they affirm their servers use 7500) and even in this case no change appened... I have HT enabled in the BIOS; SMP and IO-APIC are compiled in the kernel... but I still receive some buggy messages in dmesg (see attachement), btw my full custom device has IRQ routed to 0 (see my lspci) If anybody as some IDEA ... I will happy ;P best regards, -- Emiliano Gabrielli dip. di Fisica 2° Università di Roma "Tor Vergata" ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: e7500 and IRQ assignment 2002-11-25 18:34 ` Emiliano Gabrielli @ 2002-11-25 18:41 ` Emiliano Gabrielli 2002-11-25 19:33 ` Zwane Mwaikambo 1 sibling, 0 replies; 7+ messages in thread From: Emiliano Gabrielli @ 2002-11-25 18:41 UTC (permalink / raw) To: Zwane Mwaikambo; +Cc: linux-kernel [-- Attachment #1: Type: text/plain, Size: 645 bytes --] On 19:34, lunedì 25 novembre 2002, Emiliano Gabrielli wrote: > I have downloaded the prepatched kernel from www.aslab.com (linux-2.4.19-1) > (they affirm their servers use 7500) and even in this case no change > appened... > > I have HT enabled in the BIOS; SMP and IO-APIC are compiled in the > kernel... > > but I still receive some buggy messages in dmesg (see attachement), btw my > full custom device has IRQ routed to 0 (see my lspci) > > If anybody as some IDEA ... I will happy ;P > > best regards, sorry, I have forgotten to attach files ... my apologises -- Emiliano Gabrielli dip. di Fisica 2° Università di Roma "Tor Vergata" [-- Attachment #2: lspci --] [-- Type: text/plain, Size: 361 bytes --] 03:0c.0 Class ff00: Altera Corporation: Unknown device 0005 (rev 02) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 0 Region 0: Memory at fc200000 (32-bit, non-prefetchable) [size=1K] [-- Attachment #3: dmesg --] [-- Type: text/plain, Size: 15324 bytes --] U: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU1: Intel(R) XEON(TM) CPU 2.00GHz stepping 04 Total of 2 processors activated (7969.17 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. Setting 3 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 3 ... ok. Setting 4 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 4 ... ok. Setting 5 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 5 ... ok. Setting 6 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 6 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23, 4-0, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23, 5-0, 5-1, 5-2, 5-3, 5-4, 5-5, 5-6, 5-7, 5-8, 5-9, 5-10, 5-11, 5-12, 5-13, 5-14, 5-15, 5-16, 5-17, 5-18, 5-19, 5-20, 5-21, 5-22, 5-23, 6-0, 6-1, 6-2, 6-3, 6-4, 6-5, 6-6, 6-7, 6-8, 6-9, 6-10, 6-11, 6-12, 6-13, 6-14, 6-15, 6-16, 6-17, 6-18, 6-19, 6-20, 6-21, 6-22, 6-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 20. number of IO-APIC #2 registers: 24. number of IO-APIC #3 registers: 24. number of IO-APIC #4 registers: 24. number of IO-APIC #5 registers: 24. number of IO-APIC #6 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02008000 ....... : physical APIC id: 02 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 003 03 0 0 0 0 0 1 1 71 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 003 03 0 0 0 0 0 1 1 79 0d 003 03 0 0 0 0 0 1 1 81 0e 003 03 0 0 0 0 0 1 1 89 0f 003 03 0 0 0 0 0 1 1 91 10 003 03 1 1 0 1 0 1 1 99 11 003 03 1 1 0 1 0 1 1 A1 12 003 03 1 1 0 1 0 1 1 A9 13 003 03 1 1 0 1 0 1 1 B1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #3...... .... register #00: 03000000 ....... : physical APIC id: 03 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 03000000 ....... : arbitration: 03 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 04000000 ....... : arbitration: 04 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #5...... .... register #00: 05000000 ....... : physical APIC id: 05 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 05000000 ....... : arbitration: 05 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #6...... .... register #00: 06000000 ....... : physical APIC id: 06 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 06000000 ....... : arbitration: 06 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1996.5784 MHz. ..... host bus clock speed is 99.8288 MHz. cpu: 0, clocks: 998288, slice: 332762 CPU0<T0:998288,T1:665520,D:6,S:332762,C:998288> cpu: 1, clocks: 998288, slice: 332762 CPU1<T0:998288,T1:332752,D:12,S:332762,C:998288> checking TSC synchronization across CPUs: passed. migration_task 0 on cpu=0 migration_task 1 on cpu=1 PCI: PCI BIOS revision 2.10 entry at 0xfd875, last bus=7 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent Unknown bridge resource 2: assuming transparent Unknown bridge resource 0: assuming transparent Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent Unknown bridge resource 0: assuming transparent Unknown bridge resource 2: assuming transparent Unknown bridge resource 0: assuming transparent Unknown bridge resource 2: assuming transparent Unknown bridge resource 0: assuming transparent Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent Unknown bridge resource 0: assuming transparent Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Discovered primary peer bus 10 [IRQ] PCI: Discovered primary peer bus 11 [IRQ] PCI: Discovered primary peer bus 12 [IRQ] PCI: Using IRQ router PIIX [8086/2480] at 00:1f.0 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B7,I1,P0) -> 16 PCI->APIC IRQ transform: (B7,I2,P0) -> 17 PCI->APIC IRQ transform: (B7,I3,P0) -> 18 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd bigpage subsystem: allocated 0 bigpages (=0MB). allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 65504 aio_setup: sizeof(struct page) = 48 Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). ACPI: Core Subsystem version [20011018] ACPI: Subsystem enabled ACPI: System firmware supports S0 S1 S4 S5 Processor[0]: C0 C1 Processor[1]: C0 C1 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e i810_rng hardware driver 0.9.8 loaded Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3: IDE controller on PCI bus 00 dev f9 PCI: Enabling device 00:1f.1 (0005 -> 0007) PCI: No IRQ known for interrupt pin A of device 00:1f.1. Probably buggy MP table. ICH3: chipset revision 2 ICH3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x2060-0x2067, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x2068-0x206f, BIOS settings: hdc:pio, hdd:pio hda: IC35L040AVER07-0, ATA DISK drive hdc: LG CD-ROM CRD-8522B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c040aa24, I/O limit 4095Mb (mask 0xffffffff) hda: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63, UDMA(100) Partition check: hda: [PTBL] [5005/255/63] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 mice: PS/2 mouse device common for all mice md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 2358.400 MB/sec 32regs : 1432.800 MB/sec pIII_sse : 2574.000 MB/sec pII_mmx : 2343.600 MB/sec p5_mmx : 2314.800 MB/sec raid5: using function: pIII_sse (2574.000 MB/sec) md: multipath personality registered as nr 7 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 4096 buckets, 64Kbytes TCP: Hash tables configured (established 131072 bind 43690) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 268k freed Adding Swap: 1052248k swap-space (priority -1) IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com> microcode: CPU1 no microcode found! (sig=f24, pflags=2) microcode: CPU0 no microcode found! (sig=f24, pflags=2) eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others eth0: OEM i82557/i82558 10/100 Ethernet, 00:30:48:12:1E:82, IRQ 17. Board assembly 000000-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xb874c1d3). eth1: OEM i82557/i82558 10/100 Ethernet, 00:30:48:12:24:99, IRQ 18. Board assembly 000000-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xb874c1d3). ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: e7500 and IRQ assignment 2002-11-25 18:34 ` Emiliano Gabrielli 2002-11-25 18:41 ` Emiliano Gabrielli @ 2002-11-25 19:33 ` Zwane Mwaikambo 2002-11-25 19:54 ` Zwane Mwaikambo 1 sibling, 1 reply; 7+ messages in thread From: Zwane Mwaikambo @ 2002-11-25 19:33 UTC (permalink / raw) To: Emiliano Gabrielli; +Cc: linux-kernel [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #1: Type: TEXT/PLAIN; charset=X-UNKNOWN, Size: 1457 bytes --] On Mon, 25 Nov 2002, Emiliano Gabrielli wrote: > On 16:41, lunedì 25 novembre 2002, Zwane Mwaikambo wrote: > > On Mon, 25 Nov 2002, Emiliano Gabrielli wrote: > > > number of MP IRQ sources: 20. > > > number of IO-APIC #2 registers: 24. > > > number of IO-APIC #3 registers: 24. > > > number of IO-APIC #4 registers: 24. > > > number of IO-APIC #5 registers: 24. > > > number of IO-APIC #6 registers: 24. > > > testing the IO APIC....................... > > > > Out of curiosity, does this box really have 5 IOAPICs? > > > > Zwane > > no of course, but something seems to be buggy... > > .. nothing changed ;(( Can't be certain without more debug output from MP boot process, perhaps MP table parsing? Do you have ACPI enabled? Please humour me here (you only have 20 IRQ sources and everything looks properly wired on IOAPIC#2 ;) Index: linux-2.4.20-rc1-ac4/include/asm-i386/apicdef.h =================================================================== RCS file: /build/cvsroot/linux-2.4.20-rc1-ac4/include/asm-i386/apicdef.h,v retrieving revision 1.1.1.1 diff -u -r1.1.1.1 apicdef.h --- linux-2.4.20-rc1-ac4/include/asm-i386/apicdef.h 18 Nov 2002 01:38:42 -0000 1.1.1.1 +++ linux-2.4.20-rc1-ac4/include/asm-i386/apicdef.h 25 Nov 2002 19:30:45 -0000 @@ -115,7 +115,7 @@ #ifdef CONFIG_MULTIQUAD #define MAX_IO_APICS 32 #else -#define MAX_IO_APICS 8 +#define MAX_IO_APICS 1 #endif #define APIC_BROADCAST_ID_XAPIC 0xFF -- function.linuxpower.ca ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: e7500 and IRQ assignment 2002-11-25 19:33 ` Zwane Mwaikambo @ 2002-11-25 19:54 ` Zwane Mwaikambo 0 siblings, 0 replies; 7+ messages in thread From: Zwane Mwaikambo @ 2002-11-25 19:54 UTC (permalink / raw) To: Emiliano Gabrielli; +Cc: Linux Kernel, William Lee Irwin III On Mon, 25 Nov 2002, Zwane Mwaikambo wrote: > Please humour me here (you only have 20 IRQ sources and everything looks > properly wired on IOAPIC#2 ;) Forgot something (cheers Bill) Index: linux-2.4.20-rc1-ac4/include/asm-i386/apicdef.h =================================================================== RCS file: /build/cvsroot/linux-2.4.20-rc1-ac4/include/asm-i386/apicdef.h,v retrieving revision 1.1.1.1 diff -u -r1.1.1.1 apicdef.h --- linux-2.4.20-rc1-ac4/include/asm-i386/apicdef.h 18 Nov 2002 01:38:42 -0000 1.1.1.1 +++ linux-2.4.20-rc1-ac4/include/asm-i386/apicdef.h 25 Nov 2002 19:30:45 -0000 @@ -115,7 +115,7 @@ #ifdef CONFIG_MULTIQUAD #define MAX_IO_APICS 32 #else -#define MAX_IO_APICS 8 +#define MAX_IO_APICS 1 #endif #define APIC_BROADCAST_ID_XAPIC 0xFF Index: linux-2.4.20-rc1-ac4/arch/i386/kernel/mpparse.c =================================================================== RCS file: /build/cvsroot/linux-2.4.20-rc1-ac4/arch/i386/kernel/mpparse.c,v retrieving revision 1.1.1.1 diff -u -r1.1.1.1 mpparse.c --- linux-2.4.20-rc1-ac4/arch/i386/kernel/mpparse.c 18 Nov 2002 01:39:49 -0000 1.1.1.1 +++ linux-2.4.20-rc1-ac4/arch/i386/kernel/mpparse.c 25 Nov 2002 19:46:59 -0000 @@ -299,7 +299,7 @@ if (nr_ioapics >= MAX_IO_APICS) { printk("Max # of I/O APICs (%d) exceeded (found %d).\n", MAX_IO_APICS, nr_ioapics); - panic("Recompile kernel with bigger MAX_IO_APICS!.\n"); + return; } if (!m->mpc_apicaddr) { printk(KERN_ERR "WARNING: bogus zero I/O APIC address" -- function.linuxpower.ca ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2002-11-27 14:58 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <200211252021.52501.gabrielli@roma2.infn.it>
[not found] ` <059c01c294bb$d1036110$6502a8c0@jeff>
2002-11-27 15:06 ` e7500 and IRQ assignment Emiliano Gabrielli
2002-11-22 18:25 i7500 " Manish Lachwani
2002-11-25 14:16 ` Emiliano Gabrielli
2002-11-25 15:18 ` e7500 " Emiliano Gabrielli
2002-11-25 15:41 ` Zwane Mwaikambo
2002-11-25 18:34 ` Emiliano Gabrielli
2002-11-25 18:41 ` Emiliano Gabrielli
2002-11-25 19:33 ` Zwane Mwaikambo
2002-11-25 19:54 ` Zwane Mwaikambo
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®