* Problems radeonfb, again...
@ 2003-01-01 18:46 Daniel Golle
0 siblings, 0 replies; only message in thread
From: Daniel Golle @ 2003-01-01 18:46 UTC (permalink / raw)
To: linux-kernel
I'm running an ATI OEM (Xelo) Radeon 8500 with a NEC MultiSync 1535VI
panel connected via DVI-D. X runs well with the latest fglrx driver
from ATI as well as with the OpenSource radeon driver. When booting,
the framebuffer does not initialize (see below). With older versions of
ATI's driver (fglr200) I also had problems with the
panel-size-detection, too: I had to start X 3 to 10 times before it
started fine. Once running, there were no further probs.
Is there a possebility to skip the auto-detection of the panel size at
boot time by setting it manual (via bootparams or compiling it into the
kernel)?
--- Kernel output ---
radeonfb: ref_clk=2700, ref_div=12, xclk=25000 from BIOS
radeonfb: panel ID string: ªhé²^D
radeonfb: detected DFP panel size from BIOS: 1x0
radeonfb: Failed to detect DFP panel size
---------------------
thank you and excuse my poor english...
yours
-Daniel
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-01-01 18:38 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-01-01 18:46 Problems radeonfb, again Daniel Golle
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome