* [TRIVIAL] cli_sti in drivers_net_hamradio_bpqether.c
@ 2003-01-14 2:34 Rusty Trivial Russell
0 siblings, 0 replies; only message in thread
From: Rusty Trivial Russell @ 2003-01-14 2:34 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Joerg Reuter DL1BKE, jgarzik, linux-kernel
[ Guys, this has been sitting in my Trivial queue for a while, with
several others. The patch *looks* ok: apply it and wait for someone
to whine, or discard it?
If someonw with this card wants to test this and verify it works on
an SMP kernel, even if not an SMP box, I'd be happier.
I guess it depends on when we are going to rip out save_flags et al
entirely. Linus? ]
From: Chris Wilson <chris@qwirx.com>
As part of the Linux Kernel Janitors project, I would like to submit my
patch for bpqether.c.
The document Documentation/cli-sti-removal.txt says that cli() should no
longer be used to disable interrupts. This patch removes all references to
cli() and {save,restore}_flags.
- added a static spinlock to protect bpq_devices
- changed cli/sti and {save,restore}_flags to taking the spinlock and
disabling interrupts with spin_lock_irqsave
- included my previous patch for proc_net_create, but as a separate hunk,
so if you've already applied then just ignore the rejected hunk.
I have verified that the patched driver compiles without warnings, but
since I don't have the hardware I can't test it. Please treat with
caution.
Perhaps there is another mailing list which I should send this to, in
order to try and find kind souls to test it?
Cheers, Chris.
--
_ ___ __ _
/ __/ / ,__(_)_ | Chris Wilson <0000 at qwirx.com> - Cambs UK |
/ (_/ ,/ _/ /_ | Security/C/C++/Java/Perl/SQL/HTML Developer |
_/_/_/_//_/___/ | We are GNU-free your mind-and your software |
--- trivial-2.5.57/drivers/net/hamradio/bpqether.c.orig 2003-01-14 12:12:03.000000000 +1100
+++ trivial-2.5.57/drivers/net/hamradio/bpqether.c 2003-01-14 12:12:03.000000000 +1100
@@ -159,6 +159,8 @@
);
}
+static spinlock_t bpq_lock = SPIN_LOCK_UNLOCKED;
+
/*
* Sanity check: remove all devices that ceased to exists and
* return '1' if the given BPQ device was affected.
@@ -169,8 +171,7 @@
int result = 0;
unsigned long flags;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&bpq_lock, flags);
bpq_prev = NULL;
@@ -196,7 +197,7 @@
bpq_prev = bpq;
}
- restore_flags(flags);
+ spin_unlock_irqrestore(&bpq_lock, flags);
return result;
}
@@ -446,8 +447,9 @@
int len = 0;
off_t pos = 0;
off_t begin = 0;
+ unsigned long flags;
- cli();
+ spin_lock_irqsave(&bpq_lock, flags);
len += sprintf(buffer, "dev ether destination accept from\n");
@@ -470,7 +472,7 @@
break;
}
- sti();
+ spin_unlock_irqrestore(&bpq_lock, flags);
*start = buffer + (offset - begin);
len -= (offset - begin);
@@ -491,6 +493,7 @@
{
int k;
struct bpqdev *bpq, *bpq2;
+ unsigned long flags;
if ((bpq = kmalloc(sizeof(struct bpqdev), GFP_KERNEL)) == NULL)
return -ENOMEM;
@@ -553,7 +556,7 @@
dev->mtu = AX25_DEF_PACLEN;
dev->addr_len = AX25_ADDR_LEN;
- cli();
+ spin_lock_irqsave(&bpq_lock, flags);
if (bpq_devices == NULL) {
bpq_devices = bpq;
@@ -562,7 +565,7 @@
bpq2->next = bpq;
}
- sti();
+ spin_unlock_irqrestore(&bpq_lock, flags);
return 0;
}
@@ -615,7 +618,13 @@
printk(banner);
- proc_net_create("bpqether", 0, bpq_get_info);
+ if (!proc_net_create("bpqether", 0, bpq_get_info)) {
+ printk(KERN_ERR
+ "bpq: cannot create /proc/net/bpqether entry.\n");
+ unregister_netdevice_notifier(&bpq_dev_notifier);
+ dev_remove_pack(&bpq_packet_type);
+ return -ENOENT;
+ }
read_lock_bh(&dev_base_lock);
for (dev = dev_base; dev != NULL; dev = dev->next) {
--
Don't blame me: the Monkey is driving
File: Chris Wilson <chris@qwirx.com>: [PATCH] cli_sti in drivers_net_hamradio_bpqether.c
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-01-14 2:46 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-01-14 2:34 [TRIVIAL] cli_sti in drivers_net_hamradio_bpqether.c Rusty Trivial Russell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®