mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* RE: RS485 communicatio
@ 2003-03-13 16:56 Ed Vance
  2003-03-13 17:46 ` Richard B. Johnson
                   ` (2 more replies)
  0 siblings, 3 replies; 13+ messages in thread
From: Ed Vance @ 2003-03-13 16:56 UTC (permalink / raw)
  To: 'Linux PPP'; +Cc: linux-serial, 'linux-kernel'

On Wed, Mar 12, 2003 at 10:15 PM, linuxppp@indiainfo.com wrote:
> Hi all,
> am currently working on PPP over serial interface (RS485) in 
> linux 2.4.2-2. I believe RS485 half duplex system and hence 
> only one can transmit at a time. And for RS485 we basicaly 
> use Master-Slave or Primary-Secondary kind of communication. 
> I don't know how to achieve the same using PPP since i need 
> to have max of 10 nodes connected via serial interface. I 
> tested with two nodes using PPP daemon it works fine. 
> Following are the commands i issued
> 
> In PPP server: 
> $usr/sbin/pppd -detach crtscts 10.10.10.100:10.10.10.101 
> 115200 /dev/ttyS0 &
> 
> In PPP client side : 
> $/usr/sbin/pppd call ppp-start 
> where ppp-start file is copied into directory /etc/ppp/peers/ 
> that had the following
> 
> -detach /dev/ttyS0 115200 crtscts
> noauth
> 
> This point to point communication worked fine with RS485 
> interface. If i had to connect one more node what i need to 
> do. Please clarify with the following 
> 
> i) Whether the existing pppd takes care of the RS485 with 
> multi node , if so how do i manage giving commands
> ii) If there is no direct support how do i go ahead. Is there 
> any other layer 2 protocol allows me to acheive TCP/IP 
> communicattion over RS485 which is my ultimatum.
> 
> I will be grateful if anybody of them could help me with my 
> current problem.
> 

I believe Point-to-Point Protocol only supports point-to-point symmetric
links. Don't think there is any multi-point support in the protocol. IIRC,
PPP also requires a full duplex link, which is not available on an RS-485
link with more than two stations, even if it is a 4-wire link. 

I don't know of an easy way around this fundamental limitation.

Maybe somebody on the kernel list has a suggestion.

Cheers

---------------------------------------------------------------- 
Ed Vance              edv (at) macrolink (dot) com
Macrolink, Inc.       1500 N. Kellogg Dr  Anaheim, CA  92807
----------------------------------------------------------------

^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, other threads:[~2003-03-16 18:36 UTC | newest]

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-03-13 16:56 RS485 communicatio Ed Vance
2003-03-13 17:46 ` Richard B. Johnson
2003-03-13 22:54 ` RS485 communication Robert White
2003-03-13 23:30   ` Chris Fowler
2003-03-15  8:07     ` Robert White
2003-03-15 15:42       ` Chris Fowler
2003-03-15 12:46     ` David Woodhouse
2003-03-16  0:56       ` Alan Cox
2003-03-16 10:05         ` David Woodhouse
2003-03-16 10:35           ` Russell King
2003-03-16 10:51             ` David Woodhouse
2003-03-15 19:46 ` RS485 communicatio Pavel Machek
2003-03-16 19:57   ` Alan Cox

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®