2.4.21-pre6 and usb-uhci

2.4.21-pre6 and usb-uhci

[Miek Gieben]

Hello,

[ i'm not subscribed, so please cc me on any follow ups]

with kernel 2.4.21-pre6 my usb mouse stopped working (actually all usb stuff
stopped working). It's a logitech optical mouse which worked perfectly under
-pre5. I'm using the usb-uhci module.  I get no failures are anything of that
kind. dmesg just says:

hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
and
mice: PS/2 mouse device common for all mice

On my laptop (same mouse, same usb controllor) I also get these problems. It looks
to me if usb-uhci is not loaded or something, on -pre5 I get
this from my logs:

usb-uhci.c: $Revision: 1.275 $ time 10:38:36 Apr  1 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 9 for device 00:07.2
PCI: Sharing IRQ 9 with 00:08.0
usb-uhci.c: USB UHCI at I/O 0xfca0, IRQ 9
usb-uhci.c: Detected 2 ports

on -pre6 there are no such lines. Do I have to something differently in
pre6? Btw, the usb-uhci drivers is compiled into the kernel.

grtz  Miek


--
:wq!

Re: 2.4.21-pre6 and usb-uhci

[Martin Zwickel]

[-- Attachment #1: Type: text/plain, Size: 962 bytes --]


try using it as a module!

from greg:
> Yes, the usb host controller drivers do not get built in 2.4.21-pre6
> if
> selected to be compiled into the kernel.  This was my fault, and a
> patch
> has been sent to Marcelo to fix this.
> 
> Sorry,
> 
> greg k-h

Regards,
Martin



-- 
Martin Zwickel <martin.zwickel@technotrend.de>

Research & Development

TechnoTrend AG <http://www.technotrend.de>
Werner-von-Siemens-Str. 6
86159 Augsburg (Germany)

Tel: [+49-821-450448-16] <---> Fax: [+49-821-450448-11]

--------------------------------------------------------------------
This email, together with any attachments,  is for the exclusive and
confidential use of the addressee(s). Any other distribution, use or
reproduction without the sender's prior consent is  unauthorised and
strictly  prohibited.  If  you have received this message  in error,
please notify the sender by email immediately and delete the message
from your computer without making copies.

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: 2.4.21-pre6 and usb-uhci

[Martin Zwickel]

[-- Attachment #1: Type: text/plain, Size: 960 bytes --]


try using it as a module!

from greg:
> Yes, the usb host controller drivers do not get built in 2.4.21-pre6
> if
> selected to be compiled into the kernel.  This was my fault, and a
> patch
> has been sent to Marcelo to fix this.
> 
> Sorry,
> 
> greg k-h

Regards,
Martin

-- 
Martin Zwickel <martin.zwickel@technotrend.de>

Research & Development

TechnoTrend AG <http://www.technotrend.de>
Werner-von-Siemens-Str. 6
86159 Augsburg (Germany)

Tel: [+49-821-450448-16] <---> Fax: [+49-821-450448-11]

--------------------------------------------------------------------
This email, together with any attachments,  is for the exclusive and
confidential use of the addressee(s). Any other distribution, use or
reproduction without the sender's prior consent is  unauthorised and
strictly  prohibited.  If  you have received this message  in error,
please notify the sender by email immediately and delete the message
from your computer without making copies.

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

Re: 2.4.21-pre6 and usb-uhci

[Miek Gieben]

[On 01 Apr, @12:04, Martin wrote in "Re: 2.4.21-pre6 and usb-uhci ..."]
> 
> try using it as a module!
> 
> from greg:
> > Yes, the usb host controller drivers do not get built in 2.4.21-pre6
> > if
> > selected to be compiled into the kernel.  This was my fault, and a
> > patch
> > has been sent to Marcelo to fix this.
> > 
> > Sorry,
> > 
> > greg k-h

thanks, didn't see this message when looking for a solution...

grtz Miek

Re: 2.4.21-pre6 and usb-uhci

[Ben Collins]

On Tue, Apr 01, 2003 at 11:36:46AM +0200, Miek Gieben wrote:
> Hello,
> 
> [ i'm not subscribed, so please cc me on any follow ups]
> 
> with kernel 2.4.21-pre6 my usb mouse stopped working (actually all usb stuff
> stopped working). It's a logitech optical mouse which worked perfectly under
> -pre5. I'm using the usb-uhci module.  I get no failures are anything of that

I get the same problem. This includes a Logitech keyboard, two joysticks
and a Linksys WUSB11 wlan adapter. None of them show up.

-- 
Debian     - http://www.debian.org/
Linux 1394 - http://www.linux1394.org/
Subversion - http://subversion.tigris.org/
Deqo       - http://www.deqo.com/

Re: 2.4.21-pre6 and usb-uhci

[David S. Miller]

On Tue, 2003-04-01 at 20:54, Ben Collins wrote:
> On Tue, Apr 01, 2003 at 11:36:46AM +0200, Miek Gieben wrote:
> > Hello,
> > 
> > [ i'm not subscribed, so please cc me on any follow ups]
> > 
> > with kernel 2.4.21-pre6 my usb mouse stopped working (actually all usb stuff
> > stopped working). It's a logitech optical mouse which worked perfectly under
> > -pre5. I'm using the usb-uhci module.  I get no failures are anything of that
> 
> I get the same problem. This includes a Logitech keyboard, two joysticks
> and a Linksys WUSB11 wlan adapter. None of them show up.

drivers/usb/Makefile is borked, it doesn't link in the USB
host controller drivers when you enable them statically
into the kernel.

-- 
David S. Miller <davem@redhat.com>

Re: 2.4.21-pre6 and usb-uhci

[leon j. breedt]

hi,

after some sleuthing, i found that the file:

usb-Makefile-2.4.21-pre6.patch

located at:

http://www.kernel.org/pub/linux/kernel/people/gregkh/usb/2.4/

contains the changes necessary to fix the static build.

it didn't apply cleanly on my stock 2.4.21-pre6, but the changes
are simple enough to add in by hand.

i have it statically compiled into my kernel now and everything's
working fine.

hope this helps.

leon.