* [PATCH 2.5.66-ac2] PC-9800 sub architecture support (1/9) kconfig
2003-04-07 3:36 [PATCH 2.5.66-ac2] PC-9800 sub architecture support (0/9) summary Osamu Tomita
@ 2003-04-07 3:45 ` Osamu Tomita
2003-04-07 3:48 ` [PATCH 2.5.66-ac2] PC-9800 sub architecture support (2/9) console Osamu Tomita
` (7 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Osamu Tomita @ 2003-04-07 3:45 UTC (permalink / raw)
To: Alan Cox; +Cc: Linux Kernel Mailing List
This is the patch to support NEC PC-9800 subarchitecture
against 2.5.66-ac2. (1/9)
Add selection CONFIG_X86_PC9800.
Regards,
Osamu Tomita
diff -Nru linux-2.5.66-ac2/arch/i386/Kconfig linux98-2.5.66-ac2/arch/i386/Kconfig
--- linux-2.5.66-ac2/arch/i386/Kconfig 2003-04-05 10:06:16.000000000 +0900
+++ linux98-2.5.66-ac2/arch/i386/Kconfig 2003-04-05 10:16:36.000000000 +0900
@@ -103,6 +103,12 @@
A kernel compiled for the Visual Workstation will not run on PCs
and vice versa. See <file:Documentation/sgi-visws.txt> for details.
+config X86_PC9800
+ bool "PC-9800 (NEC)"
+ help
+ To make kernel for NEC PC-9801/PC-9821 sub-architecture, say Y.
+ If say Y, kernel works -ONLY- on PC-9800 architecture.
+
endchoice
@@ -1089,7 +1095,7 @@
config EISA
bool "EISA support"
- depends on ISA
+ depends on ISA && !X86_PC9800
---help---
The Extended Industry Standard Architecture (EISA) bus was
developed as an open alternative to the IBM MicroChannel bus.
@@ -1107,7 +1113,7 @@
config MCA
bool "MCA support"
- depends on !(X86_VISWS || X86_VOYAGER)
+ depends on !(X86_VISWS || X86_VOYAGER || X86_PC9800)
help
MicroChannel Architecture is found in some IBM PS/2 machines and
laptops. It is a bus system similar to PCI or ISA. See
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH 2.5.66-ac2] PC-9800 sub architecture support (2/9) console
2003-04-07 3:36 [PATCH 2.5.66-ac2] PC-9800 sub architecture support (0/9) summary Osamu Tomita
2003-04-07 3:45 ` [PATCH 2.5.66-ac2] PC-9800 sub architecture support (1/9) kconfig Osamu Tomita
@ 2003-04-07 3:48 ` Osamu Tomita
2003-04-07 3:49 ` [PATCH 2.5.66-ac2] PC-9800 sub architecture support (3/9) core Osamu Tomita
` (6 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Osamu Tomita @ 2003-04-07 3:48 UTC (permalink / raw)
To: Alan Cox, James Simmons; +Cc: Linux Kernel Mailing List
This is the patch to support NEC PC-9800 subarchitecture
against 2.5.66-ac2. (2/9)
PC98 Standard console support (without japanese kanji character).
Text mode video card on PC98 is useing 2bytes of VRAM by 1 character to
support japanese kanji character. VRAM for attributes is mapped another
address (+0x2000).
Character codes 0x80-0xff are diffrent with standerd PC.
Regards,
Osamu Tomita
diff -Nru linux-2.5.60/drivers/char/Makefile linux98-2.5.60/drivers/char/Makefile
--- linux-2.5.60/drivers/char/Makefile 2003-02-18 11:10:03.000000000 +0900
+++ linux98-2.5.60/drivers/char/Makefile 2003-02-20 09:16:30.000000000 +0900
@@ -5,7 +5,11 @@
#
# This file contains the font map for the default (hardware) font
#
+ifeq ($(CONFIG_X86_PC9800),y)
+FONTMAPFILE = pc9800.uni
+else
FONTMAPFILE = cp437.uni
+endif
obj-y += mem.o tty_io.o n_tty.o tty_ioctl.o pty.o misc.o random.o
diff -Nru linux/drivers/char/console_macros.h linux98/drivers/char/console_macros.h
--- linux/drivers/char/console_macros.h 2003-03-23 20:26:53.000000000 +0900
+++ linux98/drivers/char/console_macros.h 2003-03-23 21:55:14.000000000 +0900
@@ -56,6 +56,10 @@
#define s_reverse (vc_cons[currcons].d->vc_s_reverse)
#define ulcolor (vc_cons[currcons].d->vc_ulcolor)
#define halfcolor (vc_cons[currcons].d->vc_halfcolor)
+#define def_attr (vc_cons[currcons].d->vc_def_attr)
+#define ul_attr (vc_cons[currcons].d->vc_ul_attr)
+#define half_attr (vc_cons[currcons].d->vc_half_attr)
+#define bold_attr (vc_cons[currcons].d->vc_bold_attr)
#define tab_stop (vc_cons[currcons].d->vc_tab_stop)
#define palette (vc_cons[currcons].d->vc_palette)
#define bell_pitch (vc_cons[currcons].d->vc_bell_pitch)
diff -Nru linux/drivers/char/console_pc9800.h linux98/drivers/char/console_pc9800.h
--- linux/drivers/char/console_pc9800.h Thu Jan 1 09:00:00 1970
+++ linux98/drivers/char/console_pc9800.h Mon Oct 28 11:48:10 2002
@@ -0,0 +1,14 @@
+#ifndef __CONSOLE_PC9800_H
+#define __CONSOLE_PC9800_H
+
+#define BLANK_ATTR 0x00E1
+
+#define JIS_CODE 0x01
+#define EUC_CODE 0x00
+#define SJIS_CODE 0x02
+#define JIS_CODE_ASCII 0x00
+#define JIS_CODE_78 0x01
+#define JIS_CODE_83 0x02
+#define JIS_CODE_90 0x03
+
+#endif /* __CONSOLE_PC9800_H */
diff -Nru linux/drivers/char/consolemap.c linux98/drivers/char/consolemap.c
--- linux/drivers/char/consolemap.c 2002-12-10 11:46:14.000000000 +0900
+++ linux98/drivers/char/consolemap.c 2002-12-16 11:27:23.000000000 +0900
@@ -23,7 +23,7 @@
#include <linux/consolemap.h>
#include <linux/vt_kern.h>
-static unsigned short translations[][256] = {
+unsigned short translations[][256] = {
/* 8-bit Latin-1 mapped to Unicode -- trivial mapping */
{
0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007,
@@ -163,7 +163,59 @@
0xf0e8, 0xf0e9, 0xf0ea, 0xf0eb, 0xf0ec, 0xf0ed, 0xf0ee, 0xf0ef,
0xf0f0, 0xf0f1, 0xf0f2, 0xf0f3, 0xf0f4, 0xf0f5, 0xf0f6, 0xf0f7,
0xf0f8, 0xf0f9, 0xf0fa, 0xf0fb, 0xf0fc, 0xf0fd, 0xf0fe, 0xf0ff
- }
+ },
+ /* JIS X0201 mapped to Unicode */
+ /* code marked with ** is not defined in JIS X0201.
+ So 0x00 - 0x1f are mapped to same to Laten1,
+ and others are mapped to PC-9800 internal font# directry */
+ {
+ 0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007,
+/* ** ** ** ** ** ** ** ** */
+ 0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x000f,
+/* ** ** ** ** ** ** ** ** */
+ 0x0010, 0x0011, 0x0012, 0x0013, 0x0014, 0x0015, 0x0016, 0x0017,
+/* ** ** ** ** ** ** ** ** */
+ 0x0018, 0x0019, 0x001a, 0x001b, 0x001c, 0x001d, 0x001e, 0x001f,
+/* ** ** ** ** ** ** ** ** */
+ 0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026, 0x0027,
+ 0x0028, 0x0029, 0x002a, 0x002b, 0x002c, 0x002d, 0x002e, 0x002f,
+ 0x0030, 0x0031, 0x0032, 0x0033, 0x0034, 0x0035, 0x0036, 0x0037,
+ 0x0038, 0x0039, 0x003a, 0x003b, 0x003c, 0x003d, 0x003e, 0x003f,
+ 0x0040, 0x0041, 0x0042, 0x0043, 0x0044, 0x0045, 0x0046, 0x0047,
+ 0x0048, 0x0049, 0x004a, 0x004b, 0x004c, 0x004d, 0x004e, 0x004f,
+ 0x0050, 0x0051, 0x0052, 0x0053, 0x0054, 0x0055, 0x0056, 0x0057,
+ 0x0058, 0x0059, 0x005a, 0x005b, 0x00a5, 0x005d, 0x005e, 0x005f,
+ 0x0060, 0x0061, 0x0062, 0x0063, 0x0064, 0x0065, 0x0066, 0x0067,
+ 0x0068, 0x0069, 0x006a, 0x006b, 0x006c, 0x006d, 0x006e, 0x006f,
+ 0x0070, 0x0071, 0x0072, 0x0073, 0x0074, 0x0075, 0x0076, 0x0077,
+ 0x0078, 0x0079, 0x007a, 0x007b, 0x007c, 0x007d, 0x203e, 0xf07f,
+/* ** */
+ 0xf080, 0xf081, 0xf082, 0xf083, 0xf084, 0xf085, 0xf086, 0xf087,
+/* ** ** ** ** ** ** ** ** */
+ 0xf088, 0xf089, 0xf08a, 0xf08b, 0xf08c, 0xf08d, 0xf08e, 0xf08f,
+/* ** ** ** ** ** ** ** ** */
+ 0xf090, 0xf091, 0xf092, 0xf093, 0xf094, 0xf095, 0xf096, 0xf097,
+/* ** ** ** ** ** ** ** ** */
+ 0xf098, 0xf099, 0xf09a, 0xf09b, 0xf09c, 0xf09d, 0xf09e, 0xf09f,
+/* ** ** ** ** ** ** ** ** */
+ 0xf0a0, 0xff61, 0xff62, 0xff63, 0xff64, 0xff65, 0xff66, 0xff67,
+/* ** */
+ 0xff68, 0xff69, 0xff6a, 0xff6b, 0xff6c, 0xff6d, 0xff6e, 0xff6f,
+ 0xff70, 0xff71, 0xff72, 0xff73, 0xff74, 0xff75, 0xff76, 0xff77,
+ 0xff78, 0xff79, 0xff7a, 0xff7b, 0xff7c, 0xff7d, 0xff7e, 0xff7f,
+ 0xff80, 0xff81, 0xff82, 0xff83, 0xff84, 0xff85, 0xff86, 0xff87,
+ 0xff88, 0xff89, 0xff8a, 0xff8b, 0xff8c, 0xff8d, 0xff8e, 0xff8f,
+ 0xff90, 0xff91, 0xff92, 0xff93, 0xff94, 0xff95, 0xff96, 0xff97,
+ 0xff98, 0xff99, 0xff9a, 0xff9b, 0xff9c, 0xff9d, 0xff9e, 0xff9f,
+ 0xf0e0, 0xf0e1, 0xf0e2, 0xf0e3, 0xf0e4, 0xf0e5, 0xf0e6, 0xf0e7,
+/* ** ** ** ** ** ** ** ** */
+ 0xf0e8, 0xf0e9, 0xf0ea, 0xf0eb, 0xf0ec, 0xf0ed, 0xf0ee, 0xf0ef,
+/* ** ** ** ** ** ** ** ** */
+ 0xf0f0, 0xf0f1, 0xf0f2, 0xf0f3, 0xf0f4, 0xf0f5, 0xf0f6, 0xf0f7,
+/* ** ** ** ** ** ** ** ** */
+ 0xf0f8, 0xf0f9, 0xf0fa, 0xf0fb, 0xf0fc, 0xf0fd, 0xf0fe, 0xf0ff
+/* ** ** ** ** ** ** ** ** */
+ },
};
/* The standard kernel character-to-font mappings are not invertible
@@ -177,7 +229,7 @@
u16 **uni_pgdir[32];
unsigned long refcount;
unsigned long sum;
- unsigned char *inverse_translations[4];
+ unsigned char *inverse_translations[5];
int readonly;
};
diff -Nru linux/drivers/char/pc9800.uni linux98/drivers/char/pc9800.uni
--- linux/drivers/char/pc9800.uni Thu Jan 1 09:00:00 1970
+++ linux98/drivers/char/pc9800.uni Fri Aug 17 21:50:17 2001
@@ -0,0 +1,260 @@
+#
+# Unicode table for PC-9800 console.
+# Copyright (C) 1998,2001 Linux/98 project (project Seraphim)
+# Kyoto University Microcomputer Club (KMC).
+#
+
+# Kore ha unicode wo 98 no ROM no font ni taio saseru tame no
+# map desu.
+
+# Characters for control codes.
+# PC-9800 uses 2-char sequences while Unicode uses 3-char for some codes.
+0x00
+0x01 U+2401 # SH / SOH
+0x02 U+2402 # SX / SOX
+0x03 U+2403 # EX / ETX
+0x04 U+2404 # ET / EOT
+0x05 U+2405 # EQ / ENQ
+0x06 U+2406 # AK / ACK
+0x07 U+2407 # BL / BEL
+0x08 U+2408 # BS
+0x09 U+2409 # HT
+0x0a U+240a # LF
+0x0b # HM / (VT)
+0x0c # CL / (FF)
+0x0d U+240d # CR
+0x0e # SO / (SS)
+0x0f U+240f # SI
+0x10 U+2410 # DE / DLE
+0x11 U+2411 # D1 / DC1
+0x12 U+2412 # D2 / DC2
+0x13 U+2413 # D3 / DC3
+0x14 U+2414 # D4 / DC4
+0x15 U+2415 # NK / NAK
+0x16 U+2416 # SN / SYN
+0x17 U+2417 # EB / ETB
+0x18 U+2418 # CN / CAN
+0x19 U+2419 # EM
+0x1a U+241a # SB / SUB
+0x1b U+241b # EC / ESC
+
+# arrow
+0x1c U+2192 U+ffeb # right
+0x1d U+2190 U+ffe9 # left
+0x1e U+2191 U+ffea # up
+0x1f U+2193 U+ffec # down
+
+#
+# The ASCII range is identity-mapped, but some of the characters also
+# have to act as substitutes, especially the upper-case characters.
+#
+0x20 U+0020
+0x21 U+0021
+# U+00a8 is Latin-1 Supplement DIAELESIS.
+0x22 U+0022 U+00a8
+0x23 U+0023
+0x24 U+0024
+0x25 U+0025
+0x26 U+0026
+0x26 U+2019 # General Punctuation "RIGHT SINGLE QUOTATION MARK"
+0x27 U+0027 U+2032
+0x28 U+0028
+0x29 U+0029
+0x2a U+002a
+0x2b U+002b
+# U+00b8 is Latin-1 Supplement CEDILLA.
+0x2c U+002c U+00b8
+# U+00b8 is Latin-1 Supplement SOFT HYPHEN.
+0x2d U+002d U+00ad
+0x2d U+2212 # Mathematical Operators "MINUS SIGN"
+0x2e U+002e
+0x2f U+002f
+0x2f U+2044 # General Punctuation "FRACTION SLASH"
+0x2f U+2215 # Mathematical Operators "DIVISION SLASH"
+0x30 U+0030
+0x31 U+0031
+0x32 U+0032
+0x33 U+0033
+0x34 U+0034
+0x35 U+0035
+0x36 U+0036
+0x37 U+0037
+0x38 U+0038
+0x39 U+0039
+0x3a U+003a
+0x3a U+003a # Mathematical Operators "RATIO"
+0x3b U+003b
+0x3c U+003c
+0x3d U+003d
+0x3e U+003e
+0x3f U+003f
+0x40 U+0040
+0x41 U+0041 U+00c0 U+00c1 U+00c2 U+00c3
+0x42 U+0042
+# U+00a9 is Latin-1 Supplement COPYRIGHT SIGN.
+0x43 U+0043 U+00a9
+0x44 U+0044
+0x45 U+0045 U+00c8 U+00ca U+00cb
+0x46 U+0046
+0x47 U+0047
+0x48 U+0048
+0x49 U+0049 U+00cc U+00cd U+00ce U+00cf
+0x4a U+004a
+# U+212a: Letterlike Symbols "KELVIN SIGN"
+0x4b U+004b U+212a
+0x4c U+004c
+0x4d U+004d
+0x4e U+004e
+0x4f U+004f U+00d2 U+00d3 U+00d4 U+00d5
+0x50 U+0050
+0x51 U+0051
+# U+00ae: Latin-1 Supplement "REGISTERED SIGN"
+0x52 U+0052 U+00ae
+0x53 U+0053
+0x54 U+0054
+0x55 U+0055 U+00d9 U+00da U+00db
+0x56 U+0056
+0x57 U+0057
+0x58 U+0058
+0x59 U+0059 U+00dd
+0x5a U+005a
+0x5b U+005b
+0x5c U+00a5 # Latin-1 Supplement "YEN SIGN"
+0x5d U+005d
+0x5e U+005e
+0x5f U+005f U+f804
+0x60 U+0060 U+2035
+0x61 U+0061 U+00e3
+0x62 U+0062
+0x63 U+0063
+0x64 U+0064
+0x65 U+0065
+0x66 U+0066
+0x67 U+0067
+0x68 U+0068
+0x69 U+0069
+0x6a U+006a
+0x6b U+006b
+0x6c U+006c
+0x6d U+006d
+0x6e U+006e
+0x6f U+006f U+00f5
+0x70 U+0070
+0x71 U+0071
+0x72 U+0072
+0x73 U+0073
+0x74 U+0074
+0x75 U+0075
+0x76 U+0076
+0x77 U+0077
+0x78 U+0078 U+00d7
+0x79 U+0079 U+00fd
+0x7a U+007a
+0x7b U+007b
+# U+00a6: Latin-1 Supplement "BROKEN (VERTICAL) BAR"
+0x7c U+007c U+00a6
+0x7d U+007d
+0x7e U+007e
+
+# kuhaku
+0x7f # U+2302
+
+# Block Elements.
+0x80 U+2581 # LOWER ONE EIGHTH BLOCK
+0x81 U+2582 # LOWER ONE QUARTER BLOCK
+0x82 U+2583 # LOWER THREE EIGHTHS BLOCK
+0x83 U+2584 # LOWER HALF BLOCK
+0x84 U+2585 # LOWER FIVE EIGHTHS BLOCK
+0x85 U+2586 # LOWER THREE QUARTERS BLOCK
+0x86 U+2587 # LOWER SEVEN EIGHTHS BLOCK
+0x87 U+2588 # FULL BLOCK
+0x88 U+258f # LEFT ONE EIGHTH BLOCK
+0x89 U+258e # LEFT ONE QUARTER BLOCK
+0x8a U+258d # LEFT THREE EIGHTHS BLOCK
+0x8b U+258c # LEFT HALF BLOCK
+0x8c U+258b # LEFT FIVE EIGHTHS BLOCK
+0x8d U+258a # LEFT THREE QUARTERS BLOCK
+0x8e U+2589 # LEFT SEVEN EIGHTHS BLOCK
+
+# Box Drawing.
+0x8f U+253c
+0x90 U+2534
+0x91 U+252c
+0x92 U+2524
+0x93 U+251c
+0x94 U+203e # General Punctuation "OVERLINE" (= "SPACING OVERSCORE")
+0x95 U+2500 # Box Drawing "BOX DRAWING LIGHT HORIZONTAL"
+0x96 U+2502 # Box Drawing "BOX DRAWING LIGHT VERTICAL"
+0x96 U+ffe8 # Halfwidth symbol variants "HALFWIDTH FORMS LIGHT VERTICAL"
+0x97 U+2595 # Block Elements "RIGHT ONE EIGHTH BLOCK"
+0x98 U+250c
+0x99 U+2510
+0x9a U+2514
+0x9b U+2518
+
+0x9c U+256d # "BOX DRAWING LIGHT ARC DOWN AND RIGHT"
+0x9d U+256e # "BOX DRAWING LIGHT ARC DOWN AND LEFT"
+0x9e U+2570 # "BOX DRAWING LIGHT ARC UP AND RIGHT"
+0x9f U+256f # "BOX DRAWING LIGHT ARC UP AND LEFT"
+
+0xa0 # another whitespace
+
+# Halfwidth CJK punctuation
+0xa1 - 0xa4 U+ff61 - U+ff64
+
+# Halfwidth Katakana variants
+0xa5 - 0xdf U+ff65 - U+ff9f
+0xa5 U+00b7 # Latin-1 Supplement "MIDDLE DOT"
+0xdf U+00b0 # Latin-1 Supplement "DEGREE SIGN"
+
+# Box Drawing
+0xe0 U+2550 # "BOX DRAWING DOUBLE HORIZONTAL"
+0xe1 U+255e # "BOX DRAWING VERTICAL SINGLE AND RIGHT DOUBLE"
+0xe2 U+256a # "BOX DRAWING VERTICAL SINGLE AND HORIZONTAL DOUBLE"
+0xe3 U+2561 # "BOX DRAWING VERTICAL SINGLE AND LEFT DOUBLE"
+
+# Geometric Shapes
+0xe4 U+25e2 # "BLACK LOWER RIGHT TRIANGLE"
+0xe5 U+25e3 # "BLACK LOWER LEFT TRIANGLE"
+0xe6 U+25e5 # "BLACK UPPER RIGHT TRIANGLE"
+0xe7 U+25e4 # "BLACK UPPER LEFT TRIANGLE"
+
+# Playing card symbols
+0xe8 U+2660 # "BLACK SPADE SUIT"
+0xe9 U+2665 # "BLACK HEART SUIT"
+0xea U+2666 # "BLACK DIAMOND SUIT"
+0xeb U+2663 # "BLACK CLUB SUIT"
+
+# Geometric Shapes
+0xec U+25cf # "BLACK CIRCLE"
+0xed U+25cb U+25ef # "WHITE CIRCLE", "LARGE CIRCLE"
+
+# Box Drawing
+0xee U+2571 # "BOX DRAWING LIGHT DIAGONAL UPPER RIGHT TO LOWER LEFT"
+0xef U+2572 # "BOX DRAWING LIGHT DIAGONAL UPPER LEFT TO LOWER RIGHT"
+0xf0 U+2573 # "BOX DRAWING LIGHT DIAGONAL CROSS"
+
+# CJK Unified Ideographs (XXX - should these be here?)
+0xf1 U+5186
+0xf2 U+5e74
+0xf3 U+6708
+0xf4 U+65e5
+0xf5 U+6642
+0xf6 U+5206
+0xf7 U+79d2
+
+# unassigned
+0xf8
+0xf9
+0xfa
+0xfb
+
+0xfc U+005c # "REVERSE SOLIDUS" / "BACKSLASH"
+0xfc U+2216 # Mathematical Operators "SET MINUS"
+
+# unassigned
+0xfd
+0xfe
+0xff
+
+# End of pc9800.uni
diff -Nru linux-2.5.66-ac2/drivers/char/vt.c linux98-2.5.66-ac2/drivers/char/vt.c
--- linux-2.5.66-ac2/drivers/char/vt.c 2003-04-05 10:06:18.000000000 +0900
+++ linux98-2.5.66-ac2/drivers/char/vt.c 2003-04-05 10:19:31.000000000 +0900
@@ -107,6 +107,10 @@
#include "console_macros.h"
+#ifdef CONFIG_X86_PC9800
+#include "console_pc9800.h"
+extern unsigned short translations[][256];
+#endif
const struct consw *conswitchp;
@@ -301,7 +305,7 @@
xx = nxx; yy = nyy;
}
for(;;) {
- u16 attrib = scr_readw(p) & 0xff00;
+ vram_char_t attrib = scr_readw(p) & 0xff00;
int startx = xx;
u16 *q = p;
while (xx < video_num_columns && count) {
@@ -387,6 +391,8 @@
{
attr = build_attr(currcons, color, intensity, blink, underline, reverse ^ decscnm);
video_erase_char = (build_attr(currcons, color, 1, blink, 0, decscnm) << 8) | ' ';
+ if (pc98 && decscnm)
+ video_erase_char |= 0x0400; /* reverse */
}
/* Note: inverting the screen twice should revert to the original state */
@@ -403,7 +409,7 @@
else {
u16 *q = p;
int cnt = count;
- u16 a;
+ vram_char_t a;
if (!can_do_color) {
while (cnt--) {
@@ -437,7 +443,7 @@
void complement_pos(int currcons, int offset)
{
static unsigned short *p;
- static unsigned short old;
+ static vram_char_t old;
static unsigned short oldx, oldy;
if (p) {
@@ -448,10 +454,15 @@
if (offset == -1)
p = NULL;
else {
- unsigned short new;
+ vram_char_t new;
p = screenpos(currcons, offset, 1);
old = scr_readw(p);
+#ifdef CONFIG_FB_EGC
+ new = (old & 0xff0000ff) | ((old & 0xf000) >> 4)
+ | ((old & 0xf00) << 4);
+#else
new = old ^ complement_mask;
+#endif
scr_writew(new, p);
if (DO_UPDATE) {
oldx = (offset >> 1) % video_num_columns;
@@ -510,7 +521,7 @@
static void add_softcursor(int currcons)
{
- int i = scr_readw((u16 *) pos);
+ vram_char_t i = scr_readw((u16 *) pos);
u32 type = cursor_type;
if (! (type & 0x10)) return;
@@ -646,8 +657,12 @@
complement_mask = 0;
can_do_color = 0;
sw->con_init(vc_cons[currcons].d, init);
- if (!complement_mask)
- complement_mask = can_do_color ? 0x7700 : 0x0800;
+ if (!complement_mask) {
+ if (pc98)
+ complement_mask = 0x0400;
+ else
+ complement_mask = can_do_color ? 0x7700 : 0x0800;
+ }
s_complement_mask = complement_mask;
video_size_row = video_num_columns<<1;
screenbuf_size = video_num_lines*video_size_row;
@@ -679,7 +694,7 @@
visual_init(currcons, 1);
if (!*vc_cons[currcons].d->vc_uni_pagedir_loc)
con_set_default_unimap(currcons);
- q = (long)kmalloc(screenbuf_size, GFP_KERNEL);
+ q = (long)kmalloc(screenbuf_size + (pc98 ? screenbuf_size : 0), GFP_KERNEL);
if (!q) {
kfree((char *) p);
vc_cons[currcons].d = NULL;
@@ -738,7 +753,7 @@
return err;
}
- newscreen = (unsigned short *) kmalloc(new_screen_size, GFP_USER);
+ newscreen = (unsigned short *) kmalloc(new_screen_size + (pc98 ? new_screen_size : 0), GFP_USER);
if (!newscreen)
return -ENOMEM;
@@ -1264,6 +1279,10 @@
/* console_sem is held */
static void setterm_command(int currcons)
{
+ if (sw->con_setterm_command
+ && sw->con_setterm_command(vc_cons[currcons].d))
+ return;
+
switch(par[0]) {
case 1: /* set color for underline mode */
if (can_do_color && par[1] < 16) {
@@ -2430,9 +2449,17 @@
vc_cons[currcons].d->vc_palette[k++] = default_grn[j] ;
vc_cons[currcons].d->vc_palette[k++] = default_blu[j] ;
}
- def_color = 0x07; /* white */
- ulcolor = 0x0f; /* bold white */
- halfcolor = 0x08; /* grey */
+ if (pc98) {
+ def_color = 0x07; /* white */
+ def_attr = 0xE1;
+ ul_attr = 0x08; /* underline */
+ half_attr = 0x00; /* ignore half color */
+ bold_attr = 0xC1; /* yellow */
+ } else {
+ def_color = 0x07; /* white */
+ ulcolor = 0x0f; /* bold white */
+ halfcolor = 0x08; /* grey */
+ }
init_waitqueue_head(&vt_cons[currcons]->paste_wait);
reset_terminal(currcons, do_clear);
}
@@ -2473,7 +2500,12 @@
vt_cons[currcons] = (struct vt_struct *)
alloc_bootmem(sizeof(struct vt_struct));
visual_init(currcons, 1);
+#if defined(CONFIG_X86_PC9800) || defined(CONFIG_FB)
+ screenbuf
+ = (unsigned short *) alloc_bootmem(screenbuf_size * 2);
+#else
screenbuf = (unsigned short *) alloc_bootmem(screenbuf_size);
+#endif
kmalloced = 0;
vc_init(currcons, video_num_lines, video_num_columns,
currcons || !sw->con_save_screen);
@@ -2978,9 +3010,12 @@
/* used by selection */
u16 screen_glyph(int currcons, int offset)
{
- u16 w = scr_readw(screenpos(currcons, offset, 1));
+ vram_char_t w = scr_readw(screenpos(currcons, offset, 1));
u16 c = w & 0xff;
+ if (pc98)
+ return ((u16)(w >> 16) & 0xff00) | c;
+
if (w & hi_font_mask)
c |= 0x100;
return c;
diff -Nru linux-2.5.65-bk4/drivers/char/vt_ioctl.c linux98-2.5.65-bk4/drivers/char/vt_ioctl.c
--- linux-2.5.65-bk4/drivers/char/vt_ioctl.c 2003-03-23 20:26:54.000000000 +0900
+++ linux98-2.5.65-bk4/drivers/char/vt_ioctl.c 2003-03-23 21:55:14.000000000 +0900
@@ -657,6 +657,17 @@
return 0;
}
+#ifdef CONFIG_X86_PC9800
+ case VT_GDC_RESIZE:
+ {
+ if (!perm)
+ return -EPERM;
+/* con_adjust_height(0);*/
+ update_screen(console);
+ return 0;
+ }
+#endif
+
case VT_SETMODE:
{
struct vt_mode tmp;
@@ -1038,8 +1049,10 @@
vt_cons[new_console]->vt_mode.frsig = 0;
vt_cons[new_console]->vt_pid = -1;
vt_cons[new_console]->vt_newvt = -1;
+#ifndef CONFIG_X86_PC9800
if (!in_interrupt()) /* Via keyboard.c:SAK() - akpm */
reset_palette(new_console) ;
+#endif
}
/*
diff -Nru linux-2.5.65-bk4/drivers/video/console/Kconfig linux98-2.5.65-bk4/drivers/video/console/Kconfig
--- linux-2.5.65-bk4/drivers/video/console/Kconfig 2003-03-23 20:26:57.000000000 +0900
+++ linux98-2.5.65-bk4/drivers/video/console/Kconfig 2003-03-23 21:55:14.000000000 +0900
@@ -6,7 +6,7 @@
config VGA_CONSOLE
bool "VGA text console"
- depends on !ARCH_ACORN && !ARCH_EBSA110 || !4xx && !8xx
+ depends on !X86_PC9800 && !ARCH_ACORN && !ARCH_EBSA110 || !4xx && !8xx
help
Saying Y here will allow you to use Linux in text mode through a
display that complies with the generic VGA standard. Virtually
@@ -97,6 +97,18 @@
Say Y to build a console driver for Sun machines that uses the
terminal emulation built into their console PROMS.
+config GDC_CONSOLE
+ bool "PC-9800 GDC text console"
+ depends on X86_PC9800
+ default y
+ help
+ This enables support for PC-9800 standard text mode console.
+ If use NEC PC-9801/PC-9821, Say Y.
+
+config GDC_32BITACCESS
+ bool "Enable 32-bit access to text video RAM"
+ depends on GDC_CONSOLE
+
config DUMMY_CONSOLE
bool
depends on PROM_CONSOLE!=y || VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y
diff -Nru linux/include/linux/console.h linux98/include/linux/console.h
--- linux/include/linux/console.h 2003-02-15 08:51:33.000000000 +0900
+++ linux98/include/linux/console.h 2003-02-20 09:47:41.000000000 +0900
@@ -17,6 +17,13 @@
#include <linux/types.h>
#include <linux/kdev_t.h>
#include <linux/spinlock.h>
+#include <linux/config.h>
+
+#ifdef CONFIG_X86_PC9800
+typedef __u32 vram_char_t;
+#else
+typedef __u16 vram_char_t;
+#endif
struct vc_data;
struct console_font_op;
@@ -32,7 +39,7 @@
void (*con_init)(struct vc_data *, int);
void (*con_deinit)(struct vc_data *);
void (*con_clear)(struct vc_data *, int, int, int, int);
- void (*con_putc)(struct vc_data *, int, int, int);
+ void (*con_putc)(struct vc_data *, int, vram_char_t, int);
void (*con_putcs)(struct vc_data *, const unsigned short *, int, int, int);
void (*con_cursor)(struct vc_data *, int);
int (*con_scroll)(struct vc_data *, int, int, int, int);
@@ -49,6 +56,7 @@
void (*con_invert_region)(struct vc_data *, u16 *, int);
u16 *(*con_screen_pos)(struct vc_data *, int);
unsigned long (*con_getxy)(struct vc_data *, unsigned long, int *, int *);
+ int (*con_setterm_command)(struct vc_data *);
};
extern const struct consw *conswitchp;
@@ -56,6 +64,7 @@
extern const struct consw dummy_con; /* dummy console buffer */
extern const struct consw fb_con; /* frame buffer based console */
extern const struct consw vga_con; /* VGA text console */
+extern const struct consw gdc_con; /* PC-9800 GDC text console */
extern const struct consw newport_con; /* SGI Newport console */
extern const struct consw prom_con; /* SPARC PROM console */
diff -Nru linux-2.5.65-bk4/include/linux/console_struct.h linux98-2.5.65-bk4/include/linux/console_struct.h
--- linux-2.5.65-bk4/include/linux/console_struct.h 2003-03-23 20:27:02.000000000 +0900
+++ linux98-2.5.65-bk4/include/linux/console_struct.h 2003-03-23 22:22:05.000000000 +0900
@@ -9,6 +9,9 @@
* to achieve effects such as fast scrolling by changing the origin.
*/
+#include <linux/config.h>
+#include <linux/console.h>
+
#define NPAR 16
struct vc_data {
@@ -31,6 +34,10 @@
unsigned char vc_s_color; /* Saved foreground & background */
unsigned char vc_ulcolor; /* Color for underline mode */
unsigned char vc_halfcolor; /* Color for half intensity mode */
+ unsigned char vc_def_attr; /* Default attributes */
+ unsigned char vc_ul_attr; /* Attribute for underline mode */
+ unsigned char vc_half_attr; /* Attribute for half intensity mode */
+ unsigned char vc_bold_attr; /* Attribute for bold mode */
/* cursor */
unsigned int vc_cursor_type;
unsigned short vc_complement_mask; /* [#] Xor mask for mouse pointer */
@@ -41,7 +48,7 @@
/* fonts */
unsigned short vc_hi_font_mask; /* [#] Attribute set for upper 256 chars of font or 0 if not supported */
struct console_font_op vc_font; /* Current VC font set */
- unsigned short vc_video_erase_char; /* Background erase character */
+ vram_char_t vc_video_erase_char; /* Background erase character */
/* VT terminal data */
unsigned int vc_state; /* Escape sequence parser state */
unsigned int vc_npar,vc_par[NPAR]; /* Parameters of current escape sequence */
@@ -110,6 +117,10 @@
#define CUR_HWMASK 0x0f
#define CUR_SWMASK 0xfff0
+#ifdef CONFIG_X86_PC9800
+#define CUR_DEFAULT CUR_BLOCK
+#else
#define CUR_DEFAULT CUR_UNDERLINE
+#endif
#define CON_IS_VISIBLE(conp) (*conp->vc_display_fg == conp)
diff -Nru linux/include/linux/tty.h linux98/include/linux/tty.h
--- linux/include/linux/tty.h Sat Oct 19 13:01:54 2002
+++ linux98/include/linux/tty.h Mon Oct 21 14:22:18 2002
@@ -123,6 +123,10 @@
#define VIDEO_TYPE_PMAC 0x60 /* PowerMacintosh frame buffer. */
+#define VIDEO_TYPE_98NORMAL 0xa4 /* NEC PC-9800 normal */
+#define VIDEO_TYPE_9840 0xa5 /* NEC PC-9800 normal 40 lines */
+#define VIDEO_TYPE_98HIRESO 0xa6 /* NEC PC-9800 hireso */
+
/*
* This character is the same as _POSIX_VDISABLE: it cannot be used as
* a c_cc[] character, but indicates that a particular special character
diff -Nru linux/include/linux/vt.h linux98/include/linux/vt.h
--- linux/include/linux/vt.h Sat Oct 19 13:02:30 2002
+++ linux98/include/linux/vt.h Mon Oct 21 14:26:03 2002
@@ -50,5 +50,6 @@
#define VT_RESIZEX 0x560A /* set kernel's idea of screensize + more */
#define VT_LOCKSWITCH 0x560B /* disallow vt switching */
#define VT_UNLOCKSWITCH 0x560C /* allow vt switching */
+#define VT_GDC_RESIZE 0x5698
#endif /* _LINUX_VT_H */
diff -Nru linux/include/linux/vt_buffer.h linux98/include/linux/vt_buffer.h
--- linux/include/linux/vt_buffer.h Sat Oct 19 13:02:24 2002
+++ linux98/include/linux/vt_buffer.h Mon Oct 21 14:28:40 2002
@@ -19,6 +19,10 @@
#include <asm/vga.h>
#endif
+#ifdef CONFIG_GDC_CONSOLE
+#include <asm/gdc.h>
+#endif
+
#ifndef VT_BUF_HAVE_RW
#define scr_writew(val, addr) (*(addr) = (val))
#define scr_readw(addr) (*(addr))
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH 2.5.66-ac2] PC-9800 sub architecture support (3/9) core
2003-04-07 3:36 [PATCH 2.5.66-ac2] PC-9800 sub architecture support (0/9) summary Osamu Tomita
2003-04-07 3:45 ` [PATCH 2.5.66-ac2] PC-9800 sub architecture support (1/9) kconfig Osamu Tomita
2003-04-07 3:48 ` [PATCH 2.5.66-ac2] PC-9800 sub architecture support (2/9) console Osamu Tomita
@ 2003-04-07 3:49 ` Osamu Tomita
2003-04-07 3:50 ` [PATCH 2.5.66-ac2] PC-9800 sub architecture support (4/9) DMA Osamu Tomita
` (5 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Osamu Tomita @ 2003-04-07 3:49 UTC (permalink / raw)
To: Alan Cox; +Cc: Linux Kernel Mailing List
This is the patch to support NEC PC-9800 subarchitecture
against 2.5.66-ac2. (3/9)
Small patches for PC98 core support.
io.h: Using ioport 0x5f to wait is recomended by vendor.
irq.h: Cascade IRQ is 7 for PC98 not 2.
pc9800.h: Add macros to access BIOS parameters.
Regards,
Osamu Tomita
diff -Nru linux/include/asm-i386/io.h linux98/include/asm-i386/io.h
--- linux/include/asm-i386/io.h 2002-10-12 13:22:45.000000000 +0900
+++ linux98/include/asm-i386/io.h 2002-10-12 19:25:19.000000000 +0900
@@ -27,6 +27,8 @@
* Linus
*/
+#include <linux/config.h>
+
/*
* Bit simplified and optimized by Jan Hubicka
* Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
@@ -288,7 +290,11 @@
#ifdef SLOW_IO_BY_JUMPING
#define __SLOW_DOWN_IO "jmp 1f; 1: jmp 1f; 1:"
#else
+#ifdef CONFIG_X86_PC9800
+#define __SLOW_DOWN_IO "outb %%al,$0x5f;"
+#else
#define __SLOW_DOWN_IO "outb %%al,$0x80;"
+#endif
#endif
static inline void slow_down_io(void) {
diff -Nru linux/include/asm-i386/irq.h linux98/include/asm-i386/irq.h
--- linux/include/asm-i386/irq.h 2002-09-21 00:20:16.000000000 +0900
+++ linux98/include/asm-i386/irq.h 2002-09-21 07:17:56.000000000 +0900
@@ -17,7 +17,11 @@
static __inline__ int irq_cannonicalize(int irq)
{
+#ifdef CONFIG_X86_PC9800
+ return ((irq == 7) ? 11 : irq);
+#else
return ((irq == 2) ? 9 : irq);
+#endif
}
extern void disable_irq(unsigned int);
diff -Nru linux/include/asm-i386/pc9800.h linux98/include/asm-i386/pc9800.h
--- linux/include/asm-i386/pc9800.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98/include/asm-i386/pc9800.h 2002-08-17 21:50:18.000000000 +0900
@@ -0,0 +1,27 @@
+/*
+ * PC-9800 machine types.
+ *
+ * Copyright (C) 1999 TAKAI Kosuke <tak@kmc.kyoto-u.ac.jp>
+ * (Linux/98 Project)
+ */
+
+#ifndef _ASM_PC9800_H_
+#define _ASM_PC9800_H_
+
+#include <asm/pc9800_sca.h>
+#include <asm/types.h>
+
+#define __PC9800SCA(type, pa) (*(type *) phys_to_virt(pa))
+#define __PC9800SCA_TEST_BIT(pa, n) \
+ ((__PC9800SCA(u8, pa) & (1U << (n))) != 0)
+
+#define PC9800_HIGHRESO_P() __PC9800SCA_TEST_BIT(PC9800SCA_BIOS_FLAG, 3)
+#define PC9800_8MHz_P() __PC9800SCA_TEST_BIT(PC9800SCA_BIOS_FLAG, 7)
+
+ /* 0x2198 is 98 21 on memory... */
+#define PC9800_9821_P() (__PC9800SCA(u16, PC9821SCA_ROM_ID) == 0x2198)
+
+/* Note PC9821_...() are valid only when PC9800_9821_P() was true. */
+#define PC9821_IDEIF_DOUBLE_P() __PC9800SCA_TEST_BIT(PC9821SCA_ROM_FLAG4, 4)
+
+#endif
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH 2.5.66-ac2] PC-9800 sub architecture support (4/9) DMA
2003-04-07 3:36 [PATCH 2.5.66-ac2] PC-9800 sub architecture support (0/9) summary Osamu Tomita
` (2 preceding siblings ...)
2003-04-07 3:49 ` [PATCH 2.5.66-ac2] PC-9800 sub architecture support (3/9) core Osamu Tomita
@ 2003-04-07 3:50 ` Osamu Tomita
2003-04-07 3:52 ` [PATCH 2.5.66-ac2] PC-9800 sub architecture support (5/9) IDE Osamu Tomita
` (4 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Osamu Tomita @ 2003-04-07 3:50 UTC (permalink / raw)
To: Alan Cox; +Cc: Linux Kernel Mailing List
This is the patch to support NEC PC-9800 subarchitecture
against 2.5.66-ac2. (4/9)
DMA support for PC98.
For fix differences of IO port assign and memory addressing.
PC98 has 'page register' to expand DMA accesible address.
Regards,
Osamu Tomita
diff -Nru linux-2.5.66-bk8/include/asm-i386/dma.h linux98-2.5.66-bk8/include/asm-i386/dma.h
--- linux-2.5.66-bk8/include/asm-i386/dma.h 2003-04-02 22:10:44.000000000 +0900
+++ linux98-2.5.66-bk8/include/asm-i386/dma.h 2003-04-02 22:31:58.000000000 +0900
@@ -1,298 +1,10 @@
-/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
- * Written by Hennus Bergman, 1992.
- * High DMA channel support & info by Hannu Savolainen
- * and John Boyd, Nov. 1992.
- */
-
#ifndef _ASM_DMA_H
#define _ASM_DMA_H
-#include <linux/config.h>
-#include <linux/spinlock.h> /* And spinlocks */
-#include <asm/io.h> /* need byte IO */
-#include <linux/delay.h>
-
-
-#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
-#define dma_outb outb_p
-#else
-#define dma_outb outb
-#endif
-
-#define dma_inb inb
-
-/*
- * NOTES about DMA transfers:
- *
- * controller 1: channels 0-3, byte operations, ports 00-1F
- * controller 2: channels 4-7, word operations, ports C0-DF
- *
- * - ALL registers are 8 bits only, regardless of transfer size
- * - channel 4 is not used - cascades 1 into 2.
- * - channels 0-3 are byte - addresses/counts are for physical bytes
- * - channels 5-7 are word - addresses/counts are for physical words
- * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
- * - transfer count loaded to registers is 1 less than actual count
- * - controller 2 offsets are all even (2x offsets for controller 1)
- * - page registers for 5-7 don't use data bit 0, represent 128K pages
- * - page registers for 0-3 use bit 0, represent 64K pages
- *
- * DMA transfers are limited to the lower 16MB of _physical_ memory.
- * Note that addresses loaded into registers must be _physical_ addresses,
- * not logical addresses (which may differ if paging is active).
- *
- * Address mapping for channels 0-3:
- *
- * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses)
- * | ... | | ... | | ... |
- * | ... | | ... | | ... |
- * | ... | | ... | | ... |
- * P7 ... P0 A7 ... A0 A7 ... A0
- * | Page | Addr MSB | Addr LSB | (DMA registers)
- *
- * Address mapping for channels 5-7:
- *
- * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses)
- * | ... | \ \ ... \ \ \ ... \ \
- * | ... | \ \ ... \ \ \ ... \ (not used)
- * | ... | \ \ ... \ \ \ ... \
- * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0
- * | Page | Addr MSB | Addr LSB | (DMA registers)
- *
- * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
- * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
- * the hardware level, so odd-byte transfers aren't possible).
- *
- * Transfer count (_not # bytes_) is limited to 64K, represented as actual
- * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more,
- * and up to 128K bytes may be transferred on channels 5-7 in one operation.
- *
- */
-
-#define MAX_DMA_CHANNELS 8
-
-/* The maximum address that we can perform a DMA transfer to on this platform */
-#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000)
-
-/* 8237 DMA controllers */
-#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */
-#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */
-
-/* DMA controller registers */
-#define DMA1_CMD_REG 0x08 /* command register (w) */
-#define DMA1_STAT_REG 0x08 /* status register (r) */
-#define DMA1_REQ_REG 0x09 /* request register (w) */
-#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */
-#define DMA1_MODE_REG 0x0B /* mode register (w) */
-#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */
-#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */
-#define DMA1_RESET_REG 0x0D /* Master Clear (w) */
-#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */
-#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */
-
-#define DMA2_CMD_REG 0xD0 /* command register (w) */
-#define DMA2_STAT_REG 0xD0 /* status register (r) */
-#define DMA2_REQ_REG 0xD2 /* request register (w) */
-#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */
-#define DMA2_MODE_REG 0xD6 /* mode register (w) */
-#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */
-#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */
-#define DMA2_RESET_REG 0xDA /* Master Clear (w) */
-#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */
-#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */
-
-#define DMA_ADDR_0 0x00 /* DMA address registers */
-#define DMA_ADDR_1 0x02
-#define DMA_ADDR_2 0x04
-#define DMA_ADDR_3 0x06
-#define DMA_ADDR_4 0xC0
-#define DMA_ADDR_5 0xC4
-#define DMA_ADDR_6 0xC8
-#define DMA_ADDR_7 0xCC
-
-#define DMA_CNT_0 0x01 /* DMA count registers */
-#define DMA_CNT_1 0x03
-#define DMA_CNT_2 0x05
-#define DMA_CNT_3 0x07
-#define DMA_CNT_4 0xC2
-#define DMA_CNT_5 0xC6
-#define DMA_CNT_6 0xCA
-#define DMA_CNT_7 0xCE
-
-#define DMA_PAGE_0 0x87 /* DMA page registers */
-#define DMA_PAGE_1 0x83
-#define DMA_PAGE_2 0x81
-#define DMA_PAGE_3 0x82
-#define DMA_PAGE_5 0x8B
-#define DMA_PAGE_6 0x89
-#define DMA_PAGE_7 0x8A
-
-#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
-#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
-#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */
-
-#define DMA_AUTOINIT 0x10
-
-
-extern spinlock_t dma_spin_lock;
-
-static __inline__ unsigned long claim_dma_lock(void)
-{
- unsigned long flags;
- spin_lock_irqsave(&dma_spin_lock, flags);
- return flags;
-}
-
-static __inline__ void release_dma_lock(unsigned long flags)
-{
- spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
- if (dmanr<=3)
- dma_outb(dmanr, DMA1_MASK_REG);
- else
- dma_outb(dmanr & 3, DMA2_MASK_REG);
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
- if (dmanr<=3)
- dma_outb(dmanr | 4, DMA1_MASK_REG);
- else
- dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while holding the DMA lock ! ---
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
- if (dmanr<=3)
- dma_outb(0, DMA1_CLEAR_FF_REG);
- else
- dma_outb(0, DMA2_CLEAR_FF_REG);
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
- if (dmanr<=3)
- dma_outb(mode | dmanr, DMA1_MODE_REG);
- else
- dma_outb(mode | (dmanr&3), DMA2_MODE_REG);
-}
-
-/* Set only the page register bits of the transfer address.
- * This is used for successive transfers when we know the contents of
- * the lower 16 bits of the DMA current address register, but a 64k boundary
- * may have been crossed.
- */
-static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
-{
- switch(dmanr) {
- case 0:
- dma_outb(pagenr, DMA_PAGE_0);
- break;
- case 1:
- dma_outb(pagenr, DMA_PAGE_1);
- break;
- case 2:
- dma_outb(pagenr, DMA_PAGE_2);
- break;
- case 3:
- dma_outb(pagenr, DMA_PAGE_3);
- break;
- case 5:
- dma_outb(pagenr & 0xfe, DMA_PAGE_5);
- break;
- case 6:
- dma_outb(pagenr & 0xfe, DMA_PAGE_6);
- break;
- case 7:
- dma_outb(pagenr & 0xfe, DMA_PAGE_7);
- break;
- }
-}
-
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
- set_dma_page(dmanr, a>>16);
- if (dmanr <= 3) {
- dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
- dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
- } else {
- dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
- dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
- }
-}
-
-
-/* Set transfer size (max 64k for DMA0..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
- count--;
- if (dmanr <= 3) {
- dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
- dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
- } else {
- dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
- dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
- }
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
- unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
- : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
-
- /* using short to get 16-bit wrap around */
- unsigned short count;
-
- count = 1 + dma_inb(io_port);
- count += dma_inb(io_port) << 8;
-
- return (dmanr<=3)? count : (count<<1);
-}
-
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr); /* release it again */
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
+#ifdef CONFIG_X86_PC9800
+#include <asm-i386/mach-pc9800/mach_dma.h>
#else
-#define isa_dma_bridge_buggy (0)
+#include <asm-i386/mach-default/mach_dma.h>
#endif
#endif /* _ASM_DMA_H */
diff -Nru linux-2.5.66-bk8/include/asm-i386/mach-default/mach_dma.h linux98-2.5.66-bk8/include/asm-i386/mach-default/mach_dma.h
--- linux-2.5.66-bk8/include/asm-i386/mach-default/mach_dma.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98-2.5.66-bk8/include/asm-i386/mach-default/mach_dma.h 2003-04-02 22:31:58.000000000 +0900
@@ -0,0 +1,298 @@
+/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ */
+
+#ifndef _ASM_MACH_DMA_H
+#define _ASM_MACH_DMA_H
+
+#include <linux/config.h>
+#include <linux/spinlock.h> /* And spinlocks */
+#include <asm/io.h> /* need byte IO */
+#include <linux/delay.h>
+
+
+#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
+#define dma_outb outb_p
+#else
+#define dma_outb outb
+#endif
+
+#define dma_inb inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ * controller 1: channels 0-3, byte operations, ports 00-1F
+ * controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ * - ALL registers are 8 bits only, regardless of transfer size
+ * - channel 4 is not used - cascades 1 into 2.
+ * - channels 0-3 are byte - addresses/counts are for physical bytes
+ * - channels 5-7 are word - addresses/counts are for physical words
+ * - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ * - transfer count loaded to registers is 1 less than actual count
+ * - controller 2 offsets are all even (2x offsets for controller 1)
+ * - page registers for 5-7 don't use data bit 0, represent 128K pages
+ * - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * DMA transfers are limited to the lower 16MB of _physical_ memory.
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ * Address mapping for channels 0-3:
+ *
+ * A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses)
+ * | ... | | ... | | ... |
+ * | ... | | ... | | ... |
+ * | ... | | ... | | ... |
+ * P7 ... P0 A7 ... A0 A7 ... A0
+ * | Page | Addr MSB | Addr LSB | (DMA registers)
+ *
+ * Address mapping for channels 5-7:
+ *
+ * A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses)
+ * | ... | \ \ ... \ \ \ ... \ \
+ * | ... | \ \ ... \ \ \ ... \ (not used)
+ * | ... | \ \ ... \ \ \ ... \
+ * P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0
+ * | Page | Addr MSB | Addr LSB | (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation.
+ *
+ */
+
+#define MAX_DMA_CHANNELS 8
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000)
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG 0x08 /* command register (w) */
+#define DMA1_STAT_REG 0x08 /* status register (r) */
+#define DMA1_REQ_REG 0x09 /* request register (w) */
+#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */
+#define DMA1_MODE_REG 0x0B /* mode register (w) */
+#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */
+#define DMA1_RESET_REG 0x0D /* Master Clear (w) */
+#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */
+#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */
+
+#define DMA2_CMD_REG 0xD0 /* command register (w) */
+#define DMA2_STAT_REG 0xD0 /* status register (r) */
+#define DMA2_REQ_REG 0xD2 /* request register (w) */
+#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */
+#define DMA2_MODE_REG 0xD6 /* mode register (w) */
+#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */
+#define DMA2_RESET_REG 0xDA /* Master Clear (w) */
+#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */
+#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */
+
+#define DMA_ADDR_0 0x00 /* DMA address registers */
+#define DMA_ADDR_1 0x02
+#define DMA_ADDR_2 0x04
+#define DMA_ADDR_3 0x06
+#define DMA_ADDR_4 0xC0
+#define DMA_ADDR_5 0xC4
+#define DMA_ADDR_6 0xC8
+#define DMA_ADDR_7 0xCC
+
+#define DMA_CNT_0 0x01 /* DMA count registers */
+#define DMA_CNT_1 0x03
+#define DMA_CNT_2 0x05
+#define DMA_CNT_3 0x07
+#define DMA_CNT_4 0xC2
+#define DMA_CNT_5 0xC6
+#define DMA_CNT_6 0xCA
+#define DMA_CNT_7 0xCE
+
+#define DMA_PAGE_0 0x87 /* DMA page registers */
+#define DMA_PAGE_1 0x83
+#define DMA_PAGE_2 0x81
+#define DMA_PAGE_3 0x82
+#define DMA_PAGE_5 0x8B
+#define DMA_PAGE_6 0x89
+#define DMA_PAGE_7 0x8A
+
+#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT 0x10
+
+
+extern spinlock_t dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dma_spin_lock, flags);
+ return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+ spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+ if (dmanr<=3)
+ dma_outb(dmanr, DMA1_MASK_REG);
+ else
+ dma_outb(dmanr & 3, DMA2_MASK_REG);
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+ if (dmanr<=3)
+ dma_outb(dmanr | 4, DMA1_MASK_REG);
+ else
+ dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+ if (dmanr<=3)
+ dma_outb(0, DMA1_CLEAR_FF_REG);
+ else
+ dma_outb(0, DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+ if (dmanr<=3)
+ dma_outb(mode | dmanr, DMA1_MODE_REG);
+ else
+ dma_outb(mode | (dmanr&3), DMA2_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
+{
+ switch(dmanr) {
+ case 0:
+ dma_outb(pagenr, DMA_PAGE_0);
+ break;
+ case 1:
+ dma_outb(pagenr, DMA_PAGE_1);
+ break;
+ case 2:
+ dma_outb(pagenr, DMA_PAGE_2);
+ break;
+ case 3:
+ dma_outb(pagenr, DMA_PAGE_3);
+ break;
+ case 5:
+ dma_outb(pagenr & 0xfe, DMA_PAGE_5);
+ break;
+ case 6:
+ dma_outb(pagenr & 0xfe, DMA_PAGE_6);
+ break;
+ case 7:
+ dma_outb(pagenr & 0xfe, DMA_PAGE_7);
+ break;
+ }
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+ set_dma_page(dmanr, a>>16);
+ if (dmanr <= 3) {
+ dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+ dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+ } else {
+ dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+ dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+ }
+}
+
+
+/* Set transfer size (max 64k for DMA0..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+ count--;
+ if (dmanr <= 3) {
+ dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+ dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+ } else {
+ dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+ dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+ }
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+ unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
+ : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
+
+ /* using short to get 16-bit wrap around */
+ unsigned short count;
+
+ count = 1 + dma_inb(io_port);
+ count += dma_inb(io_port) << 8;
+
+ return (dmanr<=3)? count : (count<<1);
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr); /* release it again */
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy (0)
+#endif
+
+#endif /* _ASM_MACH_DMA_H */
diff -Nru linux-2.5.66-bk8/include/asm-i386/mach-pc9800/mach_dma.h linux98-2.5.66-bk8/include/asm-i386/mach-pc9800/mach_dma.h
--- linux-2.5.66-bk8/include/asm-i386/mach-pc9800/mach_dma.h 1970-01-01 09:00:00.000000000 +0900
+++ linux98-2.5.66-bk8/include/asm-i386/mach-pc9800/mach_dma.h 2003-04-02 22:31:58.000000000 +0900
@@ -0,0 +1,258 @@
+/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ *
+ * Modified for PC-9800 sub architecture by Osamu Tomita <tomita@cinet.co.jp>
+ */
+
+#ifndef _ASM_MACH_DMA_H
+#define _ASM_MACH_DMA_H
+
+#include <linux/config.h>
+#include <linux/spinlock.h> /* And spinlocks */
+#include <asm/io.h> /* need byte IO */
+#include <linux/delay.h>
+
+
+#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
+#define dma_outb outb_p
+#else
+#define dma_outb outb
+#endif
+
+#define dma_inb inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ * controller 1: channels 0-3, byte operations, ports 01-1F
+ *
+ * - ALL registers are 8 bits only, regardless of transfer size
+ * - channels 0-3 are byte - addresses/counts are for physical bytes
+ * - transfers must not cross physical 64K (0-3) boundaries
+ * - transfer count loaded to registers is 1 less than actual count
+ * - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ * Address mapping for channels 0-3:
+ *
+ * A31 ... A24 A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses)
+ * | ... | | ... | | ... | | ... |
+ * | ... | | ... | | ... | | ... |
+ * | ... | | ... | | ... | | ... |
+ * P7 ... P0 P7 ... P0 A7 ... A0 A7 ... A0
+ * | Ex Page | Page | Addr MSB | Addr LSB | (DMA registers)
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more.
+ *
+ */
+
+#define MAX_DMA_CHANNELS 4
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+#define MAX_DMA_ADDRESS (~0UL)
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE 0x01 /* 8 bit DMA, channels 0..3 */
+#define IO_DMA2_BASE 0x00 /* none */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG 0x11 /* command register (w) */
+#define DMA1_STAT_REG 0x11 /* status register (r) */
+#define DMA1_REQ_REG 0x13 /* request register (w) */
+#define DMA1_MASK_REG 0x15 /* single-channel mask (w) */
+#define DMA1_MODE_REG 0x17 /* mode register (w) */
+#define DMA1_CLEAR_FF_REG 0x19 /* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG 0x1B /* Temporary Register (r) */
+#define DMA1_RESET_REG 0x1B /* Master Clear (w) */
+#define DMA1_CLR_MASK_REG 0x1D /* Clear Mask */
+#define DMA1_MASK_ALL_REG 0x1F /* all-channels mask (w) */
+
+#define DMA2_CMD_REG 0x00 /* none */
+#define DMA2_STAT_REG 0x00 /* none */
+#define DMA2_REQ_REG 0x00 /* none */
+#define DMA2_MASK_REG 0x00 /* none */
+#define DMA2_MODE_REG 0x00 /* none */
+#define DMA2_CLEAR_FF_REG 0x00 /* none */
+#define DMA2_TEMP_REG 0x00 /* none */
+#define DMA2_RESET_REG 0x00 /* none */
+#define DMA2_CLR_MASK_REG 0x00 /* none */
+#define DMA2_MASK_ALL_REG 0x00 /* none */
+
+#define DMA_ADDR_0 0x01 /* DMA address registers */
+#define DMA_ADDR_1 0x05
+#define DMA_ADDR_2 0x09
+#define DMA_ADDR_3 0x0D
+#define DMA_ADDR_4 0x00 /* none */
+#define DMA_ADDR_5 0x00 /* none */
+#define DMA_ADDR_6 0x00 /* none */
+#define DMA_ADDR_7 0x00 /* none */
+
+#define DMA_CNT_0 0x03 /* DMA count registers */
+#define DMA_CNT_1 0x07
+#define DMA_CNT_2 0x0B
+#define DMA_CNT_3 0x0F
+#define DMA_CNT_4 0x00 /* none */
+#define DMA_CNT_5 0x00 /* none */
+#define DMA_CNT_6 0x00 /* none */
+#define DMA_CNT_7 0x00 /* none */
+
+#define DMA_PAGE_0 0x27 /* DMA page registers */
+#define DMA_PAGE_1 0x21
+#define DMA_PAGE_2 0x23
+#define DMA_PAGE_3 0x25
+#define DMA_PAGE_5 0x00 /* none */
+#define DMA_PAGE_6 0x00 /* none */
+#define DMA_PAGE_7 0x00 /* none */
+
+#define DMA_Ex_PAGE_0 0xe05 /* DMA Extended page reg base */
+#define DMA_Ex_PAGE_1 0xe07
+#define DMA_Ex_PAGE_2 0xe09
+#define DMA_Ex_PAGE_3 0xe0b
+
+#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_CASCADE 0x00 /* none */
+
+#define DMA_AUTOINIT 0x10
+
+
+extern spinlock_t dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dma_spin_lock, flags);
+ return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+ spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+ dma_outb(dmanr, DMA1_MASK_REG);
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+ dma_outb(dmanr | 4, DMA1_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+ dma_outb(0, DMA1_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+ dma_outb(mode | dmanr, DMA1_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, unsigned int pagenr)
+{
+ unsigned char low=pagenr&0xff;
+ unsigned char hi=pagenr>>8;
+
+ switch(dmanr) {
+ case 0:
+ dma_outb(low, DMA_PAGE_0);
+ dma_outb(hi, DMA_Ex_PAGE_0);
+ break;
+ case 1:
+ dma_outb(low, DMA_PAGE_1);
+ dma_outb(hi, DMA_Ex_PAGE_1);
+ break;
+ case 2:
+ dma_outb(low, DMA_PAGE_2);
+ dma_outb(hi, DMA_Ex_PAGE_2);
+ break;
+ case 3:
+ dma_outb(low, DMA_PAGE_3);
+ dma_outb(hi, DMA_Ex_PAGE_3);
+ break;
+ }
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+ set_dma_page(dmanr, a>>16);
+ dma_outb( a & 0xff, ((dmanr&3)<<2) + IO_DMA1_BASE );
+ dma_outb( (a>>8) & 0xff, ((dmanr&3)<<2) + IO_DMA1_BASE );
+}
+
+
+/* Set transfer size (max 64k for DMA0..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+ count--;
+ dma_outb( count & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA1_BASE );
+ dma_outb( (count>>8) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA1_BASE );
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+ /* using short to get 16-bit wrap around */
+ unsigned short count;
+
+ count = 1 + dma_inb(((dmanr&3)<<2) + 2 + IO_DMA1_BASE);
+ count += dma_inb(((dmanr&3)<<2) + 2 + IO_DMA1_BASE) << 8;
+
+ return count;
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr); /* release it again */
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy (0)
+#endif
+
+#endif /* _ASM_MACH_DMA_H */
diff -Nru linux/include/asm-i386/scatterlist.h linux98/include/asm-i386/scatterlist.h
--- linux/include/asm-i386/scatterlist.h 2002-04-15 04:18:52.000000000 +0900
+++ linux98/include/asm-i386/scatterlist.h 2002-04-17 10:37:22.000000000 +0900
@@ -1,6 +1,8 @@
#ifndef _I386_SCATTERLIST_H
#define _I386_SCATTERLIST_H
+#include <linux/config.h>
+
struct scatterlist {
struct page *page;
unsigned int offset;
@@ -8,6 +10,10 @@
unsigned int length;
};
+#ifdef CONFIG_X86_PC9800
+#define ISA_DMA_THRESHOLD (0xffffffff)
+#else
#define ISA_DMA_THRESHOLD (0x00ffffff)
+#endif
#endif /* !(_I386_SCATTERLIST_H) */
diff -Nru linux/kernel/dma.c linux98/kernel/dma.c
--- linux/kernel/dma.c 2002-08-11 10:41:22.000000000 +0900
+++ linux98/kernel/dma.c 2002-08-21 09:53:59.000000000 +0900
@@ -9,6 +9,7 @@
* [It also happened to remove the sizeof(char *) == sizeof(int)
* assumption introduced because of those /proc/dma patches. -- Hennus]
*/
+#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
@@ -62,10 +63,12 @@
{ 0, 0 },
{ 0, 0 },
{ 0, 0 },
+#ifndef CONFIG_X86_PC9800
{ 1, "cascade" },
{ 0, 0 },
{ 0, 0 },
{ 0, 0 }
+#endif
};
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH 2.5.66-ac2] PC-9800 sub architecture support (5/9) IDE
2003-04-07 3:36 [PATCH 2.5.66-ac2] PC-9800 sub architecture support (0/9) summary Osamu Tomita
` (3 preceding siblings ...)
2003-04-07 3:50 ` [PATCH 2.5.66-ac2] PC-9800 sub architecture support (4/9) DMA Osamu Tomita
@ 2003-04-07 3:52 ` Osamu Tomita
2003-04-07 11:32 ` Alan Cox
2003-04-07 3:54 ` [PATCH 2.5.66-ac2] PC-9800 sub architecture support (6/9) japanese "kanji" Osamu Tomita
` (3 subsequent siblings)
8 siblings, 1 reply; 12+ messages in thread
From: Osamu Tomita @ 2003-04-07 3:52 UTC (permalink / raw)
To: Alan Cox; +Cc: Linux Kernel Mailing List
This is the patch to support NEC PC-9800 subarchitecture
against 2.5.66-ac2. (5/9)
PC98 standard IDE I/F support.
- Change default IO port address and IRQ.
- Request region exactly for other optional cards.
- Get BIOS C/H/S parameter for PC98.
Regards,
Osamu Tomita
diff -Nru linux-2.5.66-ac2/drivers/ide/ide-disk.c linux98-2.5.66-ac2/drivers/ide/ide-disk.c
--- linux-2.5.66-ac2/drivers/ide/ide-disk.c 2003-04-05 10:06:18.000000000 +0900
+++ linux98-2.5.66-ac2/drivers/ide/ide-disk.c 2003-04-05 10:46:13.000000000 +0900
@@ -1591,6 +1591,71 @@
(void) probe_lba_addressing(drive, 1);
+#ifdef CONFIG_X86_PC9800
+ /* XXX - need more checks */
+ if (!drive->nobios && !drive->scsi && !drive->removable) {
+ /* PC-9800's BIOS do pack drive numbers to be continuous,
+ so extra work is needed here. */
+
+ /* drive information passed from boot/setup.S */
+ struct drive_info_struct {
+ u16 cyl;
+ u8 sect, head;
+ u16 ssize;
+ } __attribute__ ((packed));
+ extern struct drive_info_struct drive_info[];
+
+ /* this pointer must be advanced only when *DRIVE is
+ really hard disk. */
+ static struct drive_info_struct *info = drive_info;
+
+ if (info < &drive_info[4] && info->cyl) {
+ drive->cyl = drive->bios_cyl = info->cyl;
+ drive->head = drive->bios_head = info->head;
+ drive->sect = drive->bios_sect = info->sect;
+ ++info;
+ }
+ }
+
+ /* =PC98 MEMO=
+ physical capacity =< 65535*8*17 sect. : H/S=8/17 (fixed)
+ physical capacity > 65535*8*17 sect. : use physical geometry
+ (65535*8*17 = 8912760 sectors)
+ */
+ printk("%s: CHS: physical %d/%d/%d, logical %d/%d/%d, BIOS %d/%d/%d\n",
+ drive->name,
+ id->cyls, id->heads, id->sectors,
+ id->cur_cyls, id->cur_heads, id->cur_sectors,
+ drive->bios_cyl, drive->bios_head,drive->bios_sect);
+ if (!drive->cyl || !drive->head || !drive->sect) {
+ drive->cyl = drive->bios_cyl = id->cyls;
+ drive->head = drive->bios_head = id->heads;
+ drive->sect = drive->bios_sect = id->sectors;
+ printk("%s: not BIOS-supported device.\n",drive->name);
+ }
+ /* calculate drive capacity, and select LBA if possible */
+ init_idedisk_capacity(drive);
+
+ /*
+ * if possible, give fdisk access to more of the drive,
+ * by correcting bios_cyls:
+ */
+ capacity = idedisk_capacity(drive);
+ if (capacity < 8912760 &&
+ (drive->head != 8 || drive->sect != 17)) {
+ drive->head = drive->bios_head = 8;
+ drive->sect = drive->bios_sect = 17;
+ drive->cyl = drive->bios_cyl =
+ capacity / (drive->bios_head * drive->bios_sect);
+ printk("%s: Fixing Geometry :: CHS=%d/%d/%d to CHS=%d/%d/%d\n",
+ drive->name,
+ id->cur_cyls,id->cur_heads,id->cur_sectors,
+ drive->bios_cyl,drive->bios_head,drive->bios_sect);
+ id->cur_cyls = drive->bios_cyl;
+ id->cur_heads = drive->bios_head;
+ id->cur_sectors = drive->bios_sect;
+ }
+#else /* !CONFIG_X86_PC9800 */
/* Extract geometry if we did not already have one for the drive */
if (!drive->cyl || !drive->head || !drive->sect) {
drive->cyl = drive->bios_cyl = id->cyls;
@@ -1624,6 +1689,8 @@
if ((capacity >= (drive->bios_cyl * drive->bios_sect * drive->bios_head)) &&
(!drive->forced_geom) && drive->bios_sect && drive->bios_head)
drive->bios_cyl = (capacity / drive->bios_sect) / drive->bios_head;
+#endif /* CONFIG_X86_PC9800 */
+
printk (KERN_INFO "%s: %ld sectors", drive->name, capacity);
/* Give size in megabytes (MB), not mebibytes (MiB). */
diff -Nru linux-2.5.66-ac2/drivers/ide/ide-probe.c linux98-2.5.66-ac2/drivers/ide/ide-probe.c
--- linux-2.5.66-ac2/drivers/ide/ide-probe.c 2003-04-05 10:06:18.000000000 +0900
+++ linux98-2.5.66-ac2/drivers/ide/ide-probe.c 2003-04-05 10:46:13.000000000 +0900
@@ -669,7 +669,7 @@
if (hwif->mmio == 2)
return 0;
- addr_errs = hwif_check_region(hwif, hwif->io_ports[IDE_DATA_OFFSET], 1);
+ addr_errs = hwif_check_region(hwif, hwif->io_ports[IDE_DATA_OFFSET], pc98 ? 2 : 1);
for (i = IDE_ERROR_OFFSET; i <= IDE_STATUS_OFFSET; i++)
addr_errs += hwif_check_region(hwif, hwif->io_ports[i], 1);
if (hwif->io_ports[IDE_CONTROL_OFFSET])
@@ -718,7 +718,9 @@
}
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
- hwif_request_region(hwif->io_ports[i], 1, hwif->name);
+ hwif_request_region(hwif->io_ports[i],
+ (pc98 && i == IDE_DATA_OFFSET) ? 2 : 1,
+ hwif->name);
}
//EXPORT_SYMBOL(hwif_register);
@@ -806,6 +808,9 @@
#if CONFIG_BLK_DEV_PDC4030
(hwif->chipset != ide_pdc4030 || hwif->channel == 0) &&
#endif /* CONFIG_BLK_DEV_PDC4030 */
+#if CONFIG_BLK_DEV_IDE_PC9800
+ (hwif->chipset != ide_pc9800 || !hwif->mate->present) &&
+#endif
(hwif_check_regions(hwif))) {
u16 msgout = 0;
for (unit = 0; unit < MAX_DRIVES; ++unit) {
@@ -1166,7 +1171,7 @@
ide_init_drive(drive);
}
-#if !defined(__mc68000__) && !defined(CONFIG_APUS) && !defined(__sparc__)
+#if !defined(__mc68000__) && !defined(CONFIG_APUS) && !defined(__sparc__) && !defined(CONFIG_X86_PC9800)
printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name,
hwif->io_ports[IDE_DATA_OFFSET],
hwif->io_ports[IDE_DATA_OFFSET]+7,
@@ -1176,6 +1181,11 @@
hwif->io_ports[IDE_DATA_OFFSET],
hwif->io_ports[IDE_DATA_OFFSET]+7,
hwif->io_ports[IDE_CONTROL_OFFSET], __irq_itoa(hwif->irq));
+#elif defined(CONFIG_X86_PC9800)
+ printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name,
+ hwif->io_ports[IDE_DATA_OFFSET],
+ hwif->io_ports[IDE_DATA_OFFSET]+15,
+ hwif->io_ports[IDE_CONTROL_OFFSET], hwif->irq);
#else
printk("%s at %x on irq 0x%08x", hwif->name,
hwif->io_ports[IDE_DATA_OFFSET], hwif->irq);
diff -Nru linux-2.5.66-ac2/drivers/ide/ide.c linux98-2.5.66-ac2/drivers/ide/ide.c
--- linux-2.5.66-ac2/drivers/ide/ide.c 2003-04-05 10:06:18.000000000 +0900
+++ linux98-2.5.66-ac2/drivers/ide/ide.c 2003-04-05 10:46:13.000000000 +0900
@@ -551,7 +551,8 @@
}
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
if (hwif->io_ports[i]) {
- hwif_release_region(hwif->io_ports[i], 1);
+ hwif_release_region(hwif->io_ports[i],
+ (pc98 && i == IDE_DATA_OFFSET) ? 2 : 1);
}
}
}
@@ -2129,6 +2130,12 @@
}
#endif /* CONFIG_BLK_DEV_IDEPCI */
+#ifdef CONFIG_BLK_DEV_IDE_PC9800
+ {
+ extern void ide_probe_for_pc9800(void);
+ ide_probe_for_pc9800();
+ }
+#endif
#ifdef CONFIG_ETRAX_IDE
{
extern void init_e100_ide(void);
diff -Nru linux/include/linux/hdreg.h linux98/include/linux/hdreg.h
--- linux/include/linux/hdreg.h 2003-02-15 08:51:42.000000000 +0900
+++ linux98/include/linux/hdreg.h 2003-02-20 10:18:37.000000000 +0900
@@ -5,11 +5,29 @@
* This file contains some defines for the AT-hd-controller.
* Various sources.
*/
+#include <linux/config.h>
/* ide.c has its own port definitions in "ide.h" */
#define HD_IRQ 14
+#ifdef CONFIG_X86_PC9800
+/* Hd controller regs. for NEC PC-9800 */
+#define HD_DATA 0x640 /* _CTL when writing */
+#define HD_ERROR 0x642 /* see err-bits */
+#define HD_NSECTOR 0x644 /* nr of sectors to read/write */
+#define HD_SECTOR 0x646 /* starting sector */
+#define HD_LCYL 0x648 /* starting cylinder */
+#define HD_HCYL 0x64a /* high byte of starting cyl */
+#define HD_CURRENT 0x64c /* 101dhhhh , d=drive, hhhh=head */
+#define HD_STATUS 0x64e /* see status-bits */
+#define HD_FEATURE HD_ERROR /* same io address, read=error, write=feature */
+#define HD_PRECOMP HD_FEATURE /* obsolete use of this port - predates IDE */
+#define HD_COMMAND HD_STATUS /* same io address, read=status, write=cmd */
+
+#define HD_CMD 0x74c /* used for resets */
+#define HD_ALTSTATUS 0x74c /* same as HD_STATUS but doesn't clear irq */
+#else /* !CONFIG_X86_PC9800 */
/* Hd controller regs. Ref: IBM AT Bios-listing */
#define HD_DATA 0x1f0 /* _CTL when writing */
#define HD_ERROR 0x1f1 /* see err-bits */
@@ -25,6 +43,7 @@
#define HD_CMD 0x3f6 /* used for resets */
#define HD_ALTSTATUS 0x3f6 /* same as HD_STATUS but doesn't clear irq */
+#endif /* CONFIG_X86_PC9800 */
/* remainder is shared between hd.c, ide.c, ide-cd.c, and the hdparm utility */
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH 2.5.66-ac2] PC-9800 sub architecture support (5/9) IDE
2003-04-07 3:52 ` [PATCH 2.5.66-ac2] PC-9800 sub architecture support (5/9) IDE Osamu Tomita
@ 2003-04-07 11:32 ` Alan Cox
2003-04-07 12:36 ` Osamu Tomita
0 siblings, 1 reply; 12+ messages in thread
From: Alan Cox @ 2003-04-07 11:32 UTC (permalink / raw)
To: Osamu Tomita; +Cc: Linux Kernel Mailing List
On Llu, 2003-04-07 at 04:52, Osamu Tomita wrote:
> This is the patch to support NEC PC-9800 subarchitecture
> against 2.5.66-ac2. (5/9)
>
> PC98 standard IDE I/F support.
> - Change default IO port address and IRQ.
> - Request region exactly for other optional cards.
I'm ignoring this one for the moment because one of the jobs I need
to do is to move all the resource handling in IDE into the drivers
not the core code. When that is done the problem goes away
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2.5.66-ac2] PC-9800 sub architecture support (5/9) IDE
2003-04-07 11:32 ` Alan Cox
@ 2003-04-07 12:36 ` Osamu Tomita
0 siblings, 0 replies; 12+ messages in thread
From: Osamu Tomita @ 2003-04-07 12:36 UTC (permalink / raw)
To: Alan Cox; +Cc: Linux Kernel Mailing List
On Mon, Apr 07, 2003 at 12:32:32PM +0100, Alan Cox wrote:
> On Llu, 2003-04-07 at 04:52, Osamu Tomita wrote:
> > This is the patch to support NEC PC-9800 subarchitecture
> > against 2.5.66-ac2. (5/9)
> >
> > PC98 standard IDE I/F support.
> > - Change default IO port address and IRQ.
> > - Request region exactly for other optional cards.
>
> I'm ignoring this one for the moment because one of the jobs I need
> to do is to move all the resource handling in IDE into the drivers
> not the core code. When that is done the problem goes away
I see.
Thanks,
Osamu Tomita
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2.5.66-ac2] PC-9800 sub architecture support (6/9) japanese "kanji"
2003-04-07 3:36 [PATCH 2.5.66-ac2] PC-9800 sub architecture support (0/9) summary Osamu Tomita
` (4 preceding siblings ...)
2003-04-07 3:52 ` [PATCH 2.5.66-ac2] PC-9800 sub architecture support (5/9) IDE Osamu Tomita
@ 2003-04-07 3:54 ` Osamu Tomita
2003-04-07 3:55 ` [PATCH 2.5.66-ac2] PC-9800 sub architecture support (7/9) PCI Osamu Tomita
` (2 subsequent siblings)
8 siblings, 0 replies; 12+ messages in thread
From: Osamu Tomita @ 2003-04-07 3:54 UTC (permalink / raw)
To: Alan Cox, James Simmons; +Cc: Linux Kernel Mailing List
This is the patch to support NEC PC-9800 subarchitecture
against 2.5.66-ac2. (6/9)
Add japanese kanji character support to PC98 console.
Regards,
Osamu Tomita
diff -Nru linux/drivers/char/console_macros.h linux98/drivers/char/console_macros.h
--- linux/drivers/char/console_macros.h 2003-03-23 21:55:14.000000000 +0900
+++ linux98/drivers/char/console_macros.h 2003-03-24 00:13:03.000000000 +0900
@@ -69,6 +69,16 @@
#define complement_mask (vc_cons[currcons].d->vc_complement_mask)
#define s_complement_mask (vc_cons[currcons].d->vc_s_complement_mask)
#define hi_font_mask (vc_cons[currcons].d->vc_hi_font_mask)
+#define kanji_mode (vc_cons[currcons].d->vc_kanji_mode)
+#define s_kanji_mode (vc_cons[currcons].d->vc_s_kanji_mode)
+#define kanji_char1 (vc_cons[currcons].d->vc_kanji_char1)
+#define translate_ex (vc_cons[currcons].d->vc_translate_ex)
+#define G0_charset_ex (vc_cons[currcons].d->vc_G0_charset_ex)
+#define G1_charset_ex (vc_cons[currcons].d->vc_G1_charset_ex)
+#define saved_G0_ex (vc_cons[currcons].d->vc_saved_G0_ex)
+#define saved_G1_ex (vc_cons[currcons].d->vc_saved_G1_ex)
+#define kanji_jis_mode (vc_cons[currcons].d->vc_kanji_jis_mode)
+#define s_kanji_jis_mode (vc_cons[currcons].d->vc_s_kanji_jis_mode)
#define vcmode (vt_cons[currcons]->vc_mode)
diff -Nru linux/drivers/char/vt.c linux98/drivers/char/vt.c
--- linux/drivers/char/vt.c 2003-03-23 21:55:14.000000000 +0900
+++ linux98/drivers/char/vt.c 2003-03-24 00:13:03.000000000 +0900
@@ -155,6 +155,10 @@
static void blank_screen(unsigned long dummy);
static void gotoxy(int currcons, int new_x, int new_y);
static void save_cur(int currcons);
+#ifdef CONFIG_KANJI
+static void save_cur_kanji(int currcons);
+static void restore_cur_kanji(int currcons);
+#endif
static void reset_terminal(int currcons, int do_clear);
static void con_flush_chars(struct tty_struct *tty);
static void set_vesa_blanking(unsigned long arg);
@@ -439,6 +443,25 @@
do_update_region(currcons, (unsigned long) p, count);
}
+#ifdef CONFIG_KANJI
+/* can called form keyboard.c */
+void do_change_kanji_mode(int currcons, unsigned long mode)
+{
+ switch (mode) {
+ case 0:
+ kanji_mode = EUC_CODE;
+ break;
+ case 1:
+ kanji_mode = JIS_CODE;
+ break;
+ case 2:
+ kanji_mode = SJIS_CODE;
+ break;
+ }
+ kanji_char1 = 0;
+}
+#endif /* CONFIG_KANJI */
+
/* used by selection: complement pointer position */
void complement_pos(int currcons, int offset)
{
@@ -1103,6 +1126,9 @@
translate = set_translate(charset == 0
? G0_charset
: G1_charset,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = (charset == 0 ? G0_charset_ex : G1_charset_ex);
+#endif
disp_ctrl = 0;
toggle_meta = 0;
break;
@@ -1111,6 +1137,9 @@
* chars < 32 be displayed as ROM chars.
*/
translate = set_translate(IBMPC_MAP,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = 0;
+#endif
disp_ctrl = 1;
toggle_meta = 0;
break;
@@ -1119,6 +1148,9 @@
* high bit before displaying as ROM char.
*/
translate = set_translate(IBMPC_MAP,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = 0;
+#endif
disp_ctrl = 1;
toggle_meta = 1;
break;
@@ -1332,6 +1364,22 @@
case 14: /* set vesa powerdown interval */
vesa_off_interval = ((par[1] < 60) ? par[1] : 60) * 60 * HZ;
break;
+#ifdef CONFIG_KANJI
+ case 98:
+ if (par[1] < 10) /* change kanji mode */
+ do_change_kanji_mode(currcons, par[1]); /* 0208 */
+ else if (par[1] == 10) { /* save restore kanji mode */
+ switch (par[2]) {
+ case 1:
+ save_cur_kanji(currcons);
+ break;
+ case 2:
+ restore_cur_kanji(currcons);
+ break;
+ }
+ }
+ break;
+#endif /* CONFIG_KANJI */
}
}
@@ -1409,8 +1457,26 @@
need_wrap = 0;
}
+#ifdef CONFIG_KANJI
+static void save_cur_kanji(int currcons)
+{
+ s_kanji_mode = kanji_mode;
+ s_kanji_jis_mode = kanji_jis_mode;
+}
+
+static void restore_cur_kanji(int currcons)
+{
+ kanji_mode = s_kanji_mode;
+ kanji_jis_mode = s_kanji_jis_mode;
+ kanji_char1 = 0;
+}
+#endif
+
enum { ESnormal, ESesc, ESsquare, ESgetpars, ESgotpars, ESfunckey,
EShash, ESsetG0, ESsetG1, ESpercent, ESignore, ESnonstd,
+#ifdef CONFIG_KANJI
+ ESsetJIS, ESsetJIS2,
+#endif
ESpalette };
/* console_sem is held (except via vc_init()) */
@@ -1420,9 +1486,18 @@
bottom = video_num_lines;
vc_state = ESnormal;
ques = 0;
+#ifdef CONFIG_KANJI
+ translate = set_translate(JP_MAP, currcons);
+ translate_ex = 0;
+ G0_charset = JP_MAP;
+ G0_charset_ex = 0;
+ G1_charset = GRAF_MAP;
+ G1_charset_ex = 0;
+#else
translate = set_translate(LAT1_MAP,currcons);
G0_charset = LAT1_MAP;
G1_charset = GRAF_MAP;
+#endif
charset = 0;
need_wrap = 0;
report_mouse = 0;
@@ -1464,6 +1539,12 @@
bell_pitch = DEFAULT_BELL_PITCH;
bell_duration = DEFAULT_BELL_DURATION;
+#ifdef CONFIG_KANJI
+ kanji_mode = EUC_CODE;
+ kanji_char1 = 0;
+ kanji_jis_mode = JIS_CODE_ASCII;
+#endif
+
gotoxy(currcons,0,0);
save_cur(currcons);
if (do_clear)
@@ -1506,11 +1587,17 @@
case 14:
charset = 1;
translate = set_translate(G1_charset,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = G1_charset_ex;
+#endif
disp_ctrl = 1;
return;
case 15:
charset = 0;
translate = set_translate(G0_charset,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = G0_charset_ex;
+#endif
disp_ctrl = 0;
return;
case 24: case 26:
@@ -1567,6 +1654,11 @@
case ')':
vc_state = ESsetG1;
return;
+#ifdef CONFIG_KANJI
+ case '$':
+ vc_state = ESsetJIS;
+ return;
+#endif
case '#':
vc_state = EShash;
return;
@@ -1816,8 +1908,25 @@
G0_charset = IBMPC_MAP;
else if (c == 'K')
G0_charset = USER_MAP;
- if (charset == 0)
+#ifdef CONFIG_KANJI
+ G0_charset_ex = 0;
+ if (c == 'J')
+ G0_charset = JP_MAP;
+ else if (c == 'I'){
+ G0_charset = JP_MAP;
+ G0_charset_ex = 1;
+ }
+#endif /* CONFIG_KANJI */
+ if (charset == 0) {
translate = set_translate(G0_charset,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = G0_charset_ex;
+#endif
+ }
+#ifdef CONFIG_KANJI
+ kanji_jis_mode = JIS_CODE_ASCII;
+ kanji_char1 = 0;
+#endif
vc_state = ESnormal;
return;
case ESsetG1:
@@ -1829,10 +1938,51 @@
G1_charset = IBMPC_MAP;
else if (c == 'K')
G1_charset = USER_MAP;
- if (charset == 1)
+#ifdef CONFIG_KANJI
+ G1_charset_ex = 0;
+ if (c == 'J')
+ G1_charset = JP_MAP;
+ else if (c == 'I') {
+ G1_charset = JP_MAP;
+ G1_charset_ex = 1;
+ }
+#endif /* CONFIG_KANJI */
+ if (charset == 1) {
translate = set_translate(G1_charset,currcons);
+#ifdef CONFIG_KANJI
+ translate_ex = G1_charset_ex;
+#endif
+ }
+#ifdef CONFIG_KANJI
+ kanji_jis_mode = JIS_CODE_ASCII;
+ kanji_char1 = 0;
+#endif
+ vc_state = ESnormal;
+ return;
+#ifdef CONFIG_KANJI
+ case ESsetJIS:
+ if (c == '@')
+ kanji_jis_mode = JIS_CODE_78;
+ else if (c == 'B')
+ kanji_jis_mode = JIS_CODE_83;
+ else if (c == '('){
+ vc_state = ESsetJIS2;
+ return;
+ } else {
+ vc_state = ESnormal;
+ return;
+ }
vc_state = ESnormal;
+ kanji_char1 = 0;
return;
+ case ESsetJIS2:
+ if (c == 'D'){
+ kanji_jis_mode = JIS_CODE_90;
+ kanji_char1 = 0;
+ }
+ vc_state = ESnormal;
+ return;
+#endif /* CONIFG_KANJI */
default:
vc_state = ESnormal;
}
@@ -1864,7 +2014,7 @@
}
#endif
- int c, tc, ok, n = 0, draw_x = -1;
+ int c, tc = 0, ok, n = 0, draw_x = -1;
unsigned int currcons;
unsigned long draw_from = 0, draw_to = 0;
struct vt_struct *vt = (struct vt_struct *)tty->driver_data;
@@ -1921,48 +2071,151 @@
hide_cursor(currcons);
while (!tty->stopped && count) {
+ int realkanji = 0;
+ int kanjioverrun = 0;
c = *buf;
buf++;
n++;
count--;
- if (utf) {
- /* Combine UTF-8 into Unicode */
- /* Incomplete characters silently ignored */
- if(c > 0x7f) {
- if (utf_count > 0 && (c & 0xc0) == 0x80) {
- utf_char = (utf_char << 6) | (c & 0x3f);
- utf_count--;
- if (utf_count == 0)
- tc = c = utf_char;
- else continue;
- } else {
- if ((c & 0xe0) == 0xc0) {
- utf_count = 1;
- utf_char = (c & 0x1f);
- } else if ((c & 0xf0) == 0xe0) {
- utf_count = 2;
- utf_char = (c & 0x0f);
- } else if ((c & 0xf8) == 0xf0) {
- utf_count = 3;
- utf_char = (c & 0x07);
- } else if ((c & 0xfc) == 0xf8) {
- utf_count = 4;
- utf_char = (c & 0x03);
- } else if ((c & 0xfe) == 0xfc) {
- utf_count = 5;
- utf_char = (c & 0x01);
- } else
- utf_count = 0;
- continue;
- }
- } else {
- tc = c;
- utf_count = 0;
- }
- } else { /* no utf */
- tc = translate[toggle_meta ? (c|0x80) : c];
- }
+#ifdef CONFIG_KANJI
+ if (vc_state == ESnormal && !disp_ctrl) {
+ switch (kanji_jis_mode) {
+ case JIS_CODE_78:
+ case JIS_CODE_83:
+ case JIS_CODE_90:
+ if (utf)
+ break;
+ if (c >= 127 || c <= 0x20) {
+ kanji_char1 = 0;
+ break;
+ }
+ if (kanji_char1) {
+ tc = (((unsigned int)kanji_char1) << 8) |
+ (((unsigned int)c) & 0x007f);
+ kanji_char1 = 0;
+ realkanji = 1;
+ } else {
+ kanji_char1 = ((unsigned int)c) & 0x007f;
+ continue;
+ }
+ break;
+ case JIS_CODE_ASCII:
+ default:
+ switch (kanji_mode) {
+ case SJIS_CODE:
+ if (kanji_char1) {
+ if ((0x40 <= c && c <= 0x7E) ||
+ (0x80 <= c && c <= 0xFC)) {
+ realkanji = 1;
+ /* SJIS to JIS */
+ kanji_char1 <<= 1; /* 81H-9FH --> 22H-3EH */
+ /* EOH-EFH --> C0H-DEH */
+ c -= 0x1f; /* 40H-7EH --> 21H-5FH */
+ /* 80H-9EH --> 61H-7FH */
+ /* 9FH-FCH --> 80H-DDH */
+ if (!(c & 0x80)) {
+ if (c < 0x61)
+ c++;
+ c += 0xde;
+ }
+ c &= 0xff;
+ c += 0xa1;
+ kanji_char1 += 0x1f;
+ tc = (kanji_char1 << 8) + c;
+ tc &= 0x7f7f;
+ kanji_char1 = 0;
+ }
+ } else {
+ if ((0x81 <= c && c <= 0x9f) ||
+ (0xE0 <= c && c <= 0xEF)) {
+ realkanji = 1;
+ kanji_char1 = c;
+ continue;
+ } else if (0xA1 <= c && c <= 0xDF) {
+ tc = (unsigned int)translations[JP_MAP][c];
+ goto hankana_skip;
+ }
+ }
+ break;
+ case EUC_CODE:
+ if (utf)
+ break;
+ if (c <= 0x7f) {
+ kanji_char1 = 0;
+ break;
+ }
+ if (kanji_char1) {
+ if (kanji_char1 == 0x8e) { /* SS2 */
+ /* realkanji ha tatenai */
+ tc = (unsigned int)translations[JP_MAP][c];
+ kanji_char1 = 0;
+ goto hankana_skip;
+ } else {
+ tc = (((unsigned int)kanji_char1) << 8) |
+ (((unsigned int)c) & 0x007f);
+ kanji_char1 = 0;
+ realkanji = 1;
+ }
+ } else {
+ kanji_char1 = (unsigned int)c;
+ continue;
+ }
+ break;
+ case JIS_CODE:
+ /* to be supported */
+ break;
+ } /* switch (kanji_mode) */
+ } /* switch (kanji_jis_mode) */
+ } /* if (vc_state == ESnormal) */
+
+#endif /* CONFIG_KANJI */
+ if (!realkanji) {
+ if (utf) {
+ /* Combine UTF-8 into Unicode */
+ /* Incomplete characters silently ignored */
+ if(c > 0x7f) {
+ if (utf_count > 0 && (c & 0xc0) == 0x80) {
+ utf_char = (utf_char << 6) | (c & 0x3f);
+ utf_count--;
+ if (utf_count == 0)
+ tc = c = utf_char;
+ else continue;
+ } else {
+ if ((c & 0xe0) == 0xc0) {
+ utf_count = 1;
+ utf_char = (c & 0x1f);
+ } else if ((c & 0xf0) == 0xe0) {
+ utf_count = 2;
+ utf_char = (c & 0x0f);
+ } else if ((c & 0xf8) == 0xf0) {
+ utf_count = 3;
+ utf_char = (c & 0x07);
+ } else if ((c & 0xfc) == 0xf8) {
+ utf_count = 4;
+ utf_char = (c & 0x03);
+ } else if ((c & 0xfe) == 0xfc) {
+ utf_count = 5;
+ utf_char = (c & 0x01);
+ } else
+ utf_count = 0;
+ continue;
+ }
+ } else {
+ tc = c;
+ utf_count = 0;
+ }
+ } else { /* no utf */
+#ifdef CONFIG_KANJI
+ tc = translate[(toggle_meta || translate_ex) ? (c | 0x80) : c];
+#else
+ tc = translate[toggle_meta ? (c|0x80) : c];
+#endif
+ }
+ } /* if (!realkanji) */
+#ifdef CONFIG_KANJI
+ hankana_skip:
+#endif
/* If the original code was a control character we
* only allow a glyph to be displayed if the code is
@@ -1979,43 +2232,71 @@
: CTRL_ACTION) >> c) & 1)))
&& (c != 127 || disp_ctrl)
&& (c != 128+27);
+ ok |= realkanji;
if (vc_state == ESnormal && ok) {
- /* Now try to find out how to display it */
- tc = conv_uni_to_pc(vc_cons[currcons].d, tc);
- if ( tc == -4 ) {
+ if (!realkanji) {
+ /* Now try to find out how to display it */
+ tc = conv_uni_to_pc(vc_cons[currcons].d, tc);
+ if ( tc == -4 ) {
/* If we got -4 (not found) then see if we have
defined a replacement character (U+FFFD) */
- tc = conv_uni_to_pc(vc_cons[currcons].d, 0xfffd);
+ tc = conv_uni_to_pc(vc_cons[currcons].d, 0xfffd);
/* One reason for the -4 can be that we just
did a clear_unimap();
try at least to show something. */
- if (tc == -4)
- tc = c;
- } else if ( tc == -3 ) {
+ if (tc == -4)
+ tc = c;
+ } else if ( tc == -3 ) {
/* Bad hash table -- hope for the best */
- tc = c;
- }
- if (tc & ~charmask)
- continue; /* Conversion failed */
+ tc = c;
+ }
+ if (tc & ~charmask)
+ continue; /* Conversion failed */
+ } /* !realkanji */
if (need_wrap || decim)
FLUSH
if (need_wrap) {
cr(currcons);
lf(currcons);
+ if (kanjioverrun) {
+ x++;
+ pos += 2;
+ kanjioverrun = 0;
+ }
}
if (decim)
insert_char(currcons, 1);
+#ifndef CONFIG_KANJI
scr_writew(himask ?
((attr << 8) & ~himask) + ((tc & 0x100) ? himask : 0) + (tc & 0xff) :
(attr << 8) + tc,
(u16 *) pos);
+#else /* CONFIG_KANJI */
+ if (realkanji) {
+ tc = ((tc >> 8) & 0xff) | ((tc << 8) & 0xff00);
+ *((u16 *)pos) = (tc - 0x20) & 0xff7f;
+ *(pc9800_attr_offset((u16 *)pos)) = attr;
+ x ++;
+ pos += 2;
+ *((u16 *)pos) = (tc - 0x20) | 0x80;
+ *(pc9800_attr_offset((u16 *)pos)) = attr;
+ } else {
+ *((u16 *)pos) = tc & 0x00ff;
+ *(pc9800_attr_offset((u16 *)pos)) = attr;
+ }
+#endif /* !CONFIG_KANJI */
if (DO_UPDATE && draw_x < 0) {
draw_x = x;
draw_from = pos;
+ if (realkanji) {
+ draw_x --;
+ draw_from -= 2;
+ }
}
+#ifndef CONFIG_KANJI
if (x == video_num_columns - 1) {
need_wrap = decawm;
draw_to = pos+2;
@@ -2023,6 +2304,16 @@
x++;
draw_to = (pos+=2);
}
+#else /* CONFIG_KANJI */
+ if (x >= video_num_columns - 1) {
+ need_wrap = decawm;
+ kanjioverrun = x - video_num_columns + 1;
+ draw_to = pos + 2;
+ } else {
+ x++;
+ draw_to = (pos += 2);
+ }
+#endif /* !CONFIG_KANJI */
continue;
}
FLUSH
diff -Nru linux-2.5.65-bk4/drivers/video/console/Kconfig linux98-2.5.65-bk4/drivers/video/console/Kconfig
--- linux-2.5.65-bk4/drivers/video/console/Kconfig 2003-03-23 21:55:14.000000000 +0900
+++ linux98-2.5.65-bk4/drivers/video/console/Kconfig 2003-03-24 00:18:45.000000000 +0900
@@ -109,6 +109,10 @@
bool "Enable 32-bit access to text video RAM"
depends on GDC_CONSOLE
+config KANJI
+ bool "Japanese Kanji support"
+ depends on X86_PC9800
+
config DUMMY_CONSOLE
bool
depends on PROM_CONSOLE!=y || VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y
diff -Nru linux/include/linux/console_struct.h linux98/include/linux/console_struct.h
--- linux/include/linux/console_struct.h 2003-03-23 22:22:05.000000000 +0900
+++ linux98/include/linux/console_struct.h 2003-03-24 00:13:03.000000000 +0900
@@ -94,6 +94,18 @@
struct vc_data **vc_display_fg; /* [!] Ptr to var holding fg console for this display */
unsigned long vc_uni_pagedir;
unsigned long *vc_uni_pagedir_loc; /* [!] Location of uni_pagedir variable for this console */
+#ifdef CONFIG_KANJI
+ unsigned char vc_kanji_char1;
+ unsigned char vc_kanji_mode;
+ unsigned char vc_kanji_jis_mode;
+ unsigned char vc_s_kanji_mode;
+ unsigned char vc_s_kanji_jis_mode;
+ unsigned int vc_translate_ex;
+ unsigned char vc_G0_charset_ex;
+ unsigned char vc_G1_charset_ex;
+ unsigned char vc_saved_G0_ex;
+ unsigned char vc_saved_G1_ex;
+#endif /* CONFIG_KANJI */
/* additional information is in vt_kern.h */
};
diff -Nru linux/include/linux/consolemap.h linux98/include/linux/consolemap.h
--- linux/include/linux/consolemap.h Sat Oct 19 13:02:34 2002
+++ linux98/include/linux/consolemap.h Mon Oct 21 14:19:31 2002
@@ -7,6 +7,7 @@
#define GRAF_MAP 1
#define IBMPC_MAP 2
#define USER_MAP 3
+#define JP_MAP 4
struct vc_data;
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH 2.5.66-ac2] PC-9800 sub architecture support (7/9) PCI
2003-04-07 3:36 [PATCH 2.5.66-ac2] PC-9800 sub architecture support (0/9) summary Osamu Tomita
` (5 preceding siblings ...)
2003-04-07 3:54 ` [PATCH 2.5.66-ac2] PC-9800 sub architecture support (6/9) japanese "kanji" Osamu Tomita
@ 2003-04-07 3:55 ` Osamu Tomita
2003-04-07 3:56 ` [PATCH 2.5.66-ac2] PC-9800 sub architecture support (8/9) PCMCIA Osamu Tomita
2003-04-07 4:03 ` [PATCH 2.5.66-ac2] PC-9800 sub architecture support (9/9) SCSI Osamu Tomita
8 siblings, 0 replies; 12+ messages in thread
From: Osamu Tomita @ 2003-04-07 3:55 UTC (permalink / raw)
To: Alan Cox; +Cc: Linux Kernel Mailing List
This is the patch to support NEC PC-9800 subarchitecture
against 2.5.66-ac2. (7/9)
Small changes for PCI support.
Fix for difference of IRQ numbers and IO addresses.
Regards,
Osamu Tomita
diff -Nru linux/arch/i386/pci/irq.c linux98/arch/i386/pci/irq.c
--- linux/arch/i386/pci/irq.c 2002-10-12 13:22:46.000000000 +0900
+++ linux98/arch/i386/pci/irq.c 2002-10-12 14:18:52.000000000 +0900
@@ -5,6 +5,7 @@
*/
#include <linux/config.h>
+#include <linux/pci_ids.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/pci.h>
@@ -25,6 +26,7 @@
static struct irq_routing_table *pirq_table;
+#ifndef CONFIG_X86_PC9800
/*
* Never use: 0, 1, 2 (timer, keyboard, and cascade)
* Avoid using: 13, 14 and 15 (FP error and IDE).
@@ -36,6 +38,20 @@
1000000, 1000000, 1000000, 1000, 1000, 0, 1000, 1000,
0, 0, 0, 0, 1000, 100000, 100000, 100000
};
+#else
+/*
+ * Never use: 0, 1, 2, 7 (timer, keyboard, CRT VSYNC and cascade)
+ * Avoid using: 8, 9 and 15 (FP error and IDE).
+ * Penalize: 4, 5, 11, 12, 13, 14 (known ISA uses: serial, floppy, sound, mouse
+ * and parallel)
+ */
+unsigned int pcibios_irq_mask = 0xff78;
+
+static int pirq_penalty[16] = {
+ 1000000, 1000000, 1000000, 0, 1000, 1000, 0, 1000000,
+ 100000, 100000, 0, 1000, 1000, 1000, 1000, 100000
+};
+#endif
struct irq_router {
char *name;
@@ -612,6 +628,17 @@
r->set(pirq_router_dev, dev, pirq, 11);
}
+#ifdef CONFIG_X86_PC9800
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_CARDBUS) {
+ if (pci_find_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_82439TX, NULL) != NULL) {
+ if (mask & 0x0040) {
+ mask &= 0x0040; /* assign IRQ 6 only */
+ printk("pci-irq: Use IRQ6 for CardBus controller\n");
+ }
+ }
+ }
+#endif
/*
* Find the best IRQ to assign: use the one
* reported by the device if possible.
diff -Nru linux-2.5.66-ac1/drivers/pcmcia/yenta.c linux98-2.5.66-ac1/drivers/pcmcia/yenta.c
--- linux-2.5.66-ac1/drivers/pcmcia/yenta.c 2003-03-28 08:40:15.000000000 +0900
+++ linux98-2.5.66-ac1/drivers/pcmcia/yenta.c 2003-03-28 08:48:50.000000000 +0900
@@ -8,6 +8,7 @@
* Dynamically adjust the size of the bridge resource
*
*/
+#include <linux/config.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/sched.h>
@@ -452,6 +453,7 @@
add_timer(&socket->poll_timer);
}
+#ifndef CONFIG_X86_PC9800
/*
* Only probe "regular" interrupts, don't
* touch dangerous spots like the mouse irq,
@@ -462,6 +464,10 @@
* Default to 11, 10, 9, 7, 6, 5, 4, 3.
*/
static u32 isa_interrupts = 0x0ef8;
+#else
+/* Default to 12, 10, 6, 5, 3. */
+static u32 isa_interrupts = 0x1468;
+#endif
static unsigned int yenta_probe_irq(pci_socket_t *socket, u32 isa_irq_mask)
{
diff -Nru linux/include/asm-i386/pci.h linux98/include/asm-i386/pci.h
--- linux/include/asm-i386/pci.h 2002-06-09 14:29:24.000000000 +0900
+++ linux98/include/asm-i386/pci.h 2002-06-10 20:49:15.000000000 +0900
@@ -17,7 +17,11 @@
#endif
extern unsigned long pci_mem_start;
+#ifdef CONFIG_X86_PC9800
+#define PCIBIOS_MIN_IO 0x4000
+#else
#define PCIBIOS_MIN_IO 0x1000
+#endif
#define PCIBIOS_MIN_MEM (pci_mem_start)
void pcibios_config_init(void);
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH 2.5.66-ac2] PC-9800 sub architecture support (8/9) PCMCIA
2003-04-07 3:36 [PATCH 2.5.66-ac2] PC-9800 sub architecture support (0/9) summary Osamu Tomita
` (6 preceding siblings ...)
2003-04-07 3:55 ` [PATCH 2.5.66-ac2] PC-9800 sub architecture support (7/9) PCI Osamu Tomita
@ 2003-04-07 3:56 ` Osamu Tomita
2003-04-07 4:03 ` [PATCH 2.5.66-ac2] PC-9800 sub architecture support (9/9) SCSI Osamu Tomita
8 siblings, 0 replies; 12+ messages in thread
From: Osamu Tomita @ 2003-04-07 3:56 UTC (permalink / raw)
To: Alan Cox; +Cc: Linux Kernel Mailing List
This is the patch to support NEC PC-9800 subarchitecture
against 2.5.66-ac2. (8/9)
Small change for PCMCIA (16bits) support.
For fix usable IRQ number.
Regards,
Osamu Tomita
diff -Nru linux-2.5.62-ac1/drivers/pcmcia/i82365.c linux98-2.5.62-ac1/drivers/pcmcia/i82365.c
--- linux-2.5.62-ac1/drivers/pcmcia/i82365.c 2003-02-18 07:56:55.000000000 +0900
+++ linux98-2.5.62-ac1/drivers/pcmcia/i82365.c 2003-02-21 11:14:30.000000000 +0900
@@ -188,7 +188,11 @@
};
/* Default ISA interrupt mask */
+#ifndef CONFIG_X86_PC9800
#define I365_MASK 0xdeb8 /* irq 15,14,12,11,10,9,7,5,4,3 */
+#else
+#define I365_MASK 0xd668 /* irq 15,14,12,10,9,6,5,3 */
+#endif
#ifdef CONFIG_ISA
static int grab_irq;
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH 2.5.66-ac2] PC-9800 sub architecture support (9/9) SCSI
2003-04-07 3:36 [PATCH 2.5.66-ac2] PC-9800 sub architecture support (0/9) summary Osamu Tomita
` (7 preceding siblings ...)
2003-04-07 3:56 ` [PATCH 2.5.66-ac2] PC-9800 sub architecture support (8/9) PCMCIA Osamu Tomita
@ 2003-04-07 4:03 ` Osamu Tomita
8 siblings, 0 replies; 12+ messages in thread
From: Osamu Tomita @ 2003-04-07 4:03 UTC (permalink / raw)
To: Alan Cox, James Bottomley; +Cc: linux-scsi, linux-kernel
This is the patch to support NEC PC-9800 subarchitecture
against 2.5.66-ac2. (9/9)
SCSI host adapter support.
- Override BIOS parameter for PC98.
I rewrite this patch. Function for PC-98 BIOS parameter is called from each
low level drivers. How about this patch. We need PC-98's BIOS parameter to
create bootable partition. Please apply.
Regards,
Osamu Tomita
diff -Nru linux-2.5.66-bk10/drivers/scsi/advansys.h linux98-2.5.66-bk10/drivers/scsi/advansys.h
--- linux-2.5.66-bk10/drivers/scsi/advansys.h 2003-03-25 07:01:48.000000000 +0900
+++ linux98-2.5.66-bk10/drivers/scsi/advansys.h 2003-04-05 18:52:32.000000000 +0900
@@ -71,6 +71,13 @@
* AdvanSys Host Driver Scsi_Host_Template (struct SHT) from hosts.h.
*/
#if ASC_LINUX_KERNEL24
+#ifdef CONFIG_X86_PC9800
+extern int pc98_bios_param(struct scsi_device *, struct block_device *,
+ sector_t, int *);
+#define ADVANSYS_BIOSPARAM pc98_bios_param
+#else
+#define ADVANSYS_BIOSPARAM advansys_biosparam
+#endif
#define ADVANSYS { \
.proc_name = "advansys", \
.proc_info = advansys_proc_info, \
@@ -80,7 +87,7 @@
.info = advansys_info, \
.queuecommand = advansys_queuecommand, \
.eh_bus_reset_handler = advansys_reset, \
- .bios_param = advansys_biosparam, \
+ .bios_param = ADVANSYS_BIOSPARAM, \
.slave_configure = advansys_slave_configure, \
/* \
* Because the driver may control an ISA adapter 'unchecked_isa_dma' \
diff -Nru linux-2.5.66-bk10/drivers/scsi/aic7xxx/aic7xxx_osm.c linux98-2.5.66-bk10/drivers/scsi/aic7xxx/aic7xxx_osm.c
--- linux-2.5.66-bk10/drivers/scsi/aic7xxx/aic7xxx_osm.c 2003-04-04 22:45:00.000000000 +0900
+++ linux98-2.5.66-bk10/drivers/scsi/aic7xxx/aic7xxx_osm.c 2003-04-05 18:56:11.000000000 +0900
@@ -1265,6 +1265,9 @@
return SUCCESS;
}
+extern int pc98_bios_param(struct scsi_device *, struct block_device *,
+ sector_t, int *);
+
Scsi_Host_Template aic7xxx_driver_template = {
.module = THIS_MODULE,
.name = "aic7xxx",
@@ -1275,8 +1278,12 @@
.eh_device_reset_handler = ahc_linux_dev_reset,
.eh_bus_reset_handler = ahc_linux_bus_reset,
#if defined(__i386__)
+#ifdef CONFIG_X86_PC9800
+ .bios_param = pc98_bios_param,
+#else
.bios_param = ahc_linux_biosparam,
#endif
+#endif
.can_queue = AHC_MAX_QUEUE,
.this_id = -1,
.sg_tablesize = AHC_NSEG,
diff -Nru linux-2.5.66-bk10/drivers/scsi/sym53c8xx_2/sym53c8xx.h linux98-2.5.66-bk10/drivers/scsi/sym53c8xx_2/sym53c8xx.h
--- linux-2.5.66-bk10/drivers/scsi/sym53c8xx_2/sym53c8xx.h 2003-03-25 07:01:49.000000000 +0900
+++ linux98-2.5.66-bk10/drivers/scsi/sym53c8xx_2/sym53c8xx.h 2003-04-05 18:59:21.000000000 +0900
@@ -105,23 +105,32 @@
#include <scsi/scsicam.h>
+#ifdef CONFIG_X86_PC9800
+extern int pc98_bios_param(struct scsi_device *, struct block_device *,
+ sector_t, int *);
+#define SYM53C8XX_BIOSPARAM pc98_bios_param
+#else
+#define SYM53C8XX_BIOSPARAM NULL
+#endif
+
#define SYM53C8XX { \
- name: "sym53c8xx", \
- detect: sym53c8xx_detect, \
- release: sym53c8xx_release, \
- info: sym53c8xx_info, \
- queuecommand: sym53c8xx_queue_command, \
- slave_configure: sym53c8xx_slave_configure, \
- eh_abort_handler: sym53c8xx_eh_abort_handler, \
- eh_device_reset_handler:sym53c8xx_eh_device_reset_handler, \
- eh_bus_reset_handler: sym53c8xx_eh_bus_reset_handler, \
- eh_host_reset_handler: sym53c8xx_eh_host_reset_handler, \
- can_queue: 0, \
- this_id: 7, \
- sg_tablesize: 0, \
- cmd_per_lun: 0, \
- use_clustering: DISABLE_CLUSTERING, \
- highmem_io: 1}
+ .name = "sym53c8xx", \
+ .detect = sym53c8xx_detect, \
+ .release = sym53c8xx_release, \
+ .info = sym53c8xx_info, \
+ .queuecommand = sym53c8xx_queue_command, \
+ .slave_configure = sym53c8xx_slave_configure, \
+ .eh_abort_handler = sym53c8xx_eh_abort_handler, \
+ .eh_device_reset_handler = sym53c8xx_eh_device_reset_handler, \
+ .eh_bus_reset_handler = sym53c8xx_eh_bus_reset_handler, \
+ .eh_host_reset_handler = sym53c8xx_eh_host_reset_handler, \
+ .bios_param = SYM53C8XX_BIOSPARAM, \
+ .can_queue = 0, \
+ .this_id = 7, \
+ .sg_tablesize = 0, \
+ .cmd_per_lun = 0, \
+ .use_clustering = DISABLE_CLUSTERING, \
+ .highmem_io = 1}
#endif /* defined(HOSTS_C) || defined(MODULE) */
^ permalink raw reply [flat|nested] 12+ messages in thread