kernel panic (2.5.67-ac1)

kernel panic (2.5.67-ac1)

[Christian Staudenmayer]

hello,

(i've posted a similar message before but i've been told to add the whole error
message, so here it is. sorry about that, but typing screenfulls of hex numbers
makes me feel like a geek but it also makes my head hurt ;)

the 2.5.67 kernel boots fine here, but the -ac1 patch to it ends up in 
a kernel panic.
here are the last 25 lines of the error, i don't know if there is more above of it,
scrolling up didn't work... (btw there can be typos in it ;)

Process swapper (pid: 1, threadinfo=dbf8e000 task=dbf8c040)
Stack: c15259a8 c15259a8 00000001 00000002 dbf8fe48 c022cd1a c15259a8 000000ff
       dbf8fe3c dbf8fe40
Call Trace:
 [<c022cd1a>] ide_xlate_1024+0x106/0x18c
 [<c01654aa>] handle_ide_mess+0x14e/0x1e8
 [<c016557f>] msdos_partition+0x3b/0x3ec
 [<c01171fa>] release_console_sem+0x32/0x94
 [<c0117165>] printk+0xfd/0x114
 [<c016491d>] check_partition+0xa1/0xec
 [<c0164c13>] register_disk+0xa7/0x144
 [<c0164c28>] register_disk+0xbc/0x144
 [<c0218301>] add_disk+0x35/0x44
 [<c021829c>] exact_match+0x0/0xc
 [<c02182a8>] exact_lock+0x0/0x24
 [<c0273589>] sd_attach+0x1d/0x244
 [<c023d9c0>] scsi_register_device+0xb8/0xe4
 [<c010502c>] init+0x0/0x144
 [<c0105049>] init+0x1d/0x144
 [<c010502c>] init+0x0/0x144
 [<c01079c1>] kernel_thread_helper+0x5/0xc

Code: 8b 40 38 be 93 74 31 c0 ff d0 89 c1 c7 03 3f 00 00 00 85 ff
 <0>Kernel panic: Attempted to kill init!

The machine is a p3 700 with 448MB of ram, and it's running an old scsi 
disk at an adaptec 2940
controller that uses the aic7xxx drivers (at boot it says AIC7870).
When configuring (make menuconfig) the kernel, i loaded the saved 
config file that worked for 2.5.67.

Note: i am not subscribed to the lkml, perhaps i will later on, when 
i'm more experienced.
so, please email me at the_sithlord@yahoo.com
you can also drop by in my undernet channel called #hansapils

any help regarding this problem would be highly appreciated.

greetings, chris
the_sithlord@yahoo.com

__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more
http://tax.yahoo.com

Re: kernel panic (2.5.67-ac1)

[Patrick Mansfield]

On Mon, Apr 14, 2003 at 12:25:48PM -0700, Christian Staudenmayer wrote:
> hello,
> 
> (i've posted a similar message before but i've been told to add the whole error
> message, so here it is. sorry about that, but typing screenfulls of hex numbers
> makes me feel like a geek but it also makes my head hurt ;)
> 
> the 2.5.67 kernel boots fine here, but the -ac1 patch to it ends up in 
> a kernel panic.
> here are the last 25 lines of the error, i don't know if there is more above of it,
> scrolling up didn't work... (btw there can be typos in it ;)

This stack looks very much like the problem with scsi queue plugging
behaviour and the removal of blk_empty_queue. It is not always hit, there
could easily be something in ac that changed the timing.

[If so] this is not a problem in the ac kernel, even though you only hit
it after adding the ac patch.

James B sent in a fix, it's included in the current bk tree, the changelog
says:

  fix scsi queue plugging behaviour
  
  Following recent changes removing blk_queue_empty(), we were
  incorrectly plugging the queue some times (most often as part of
  the SCSI scan process).  This was causing a non-deterministic panic
  in the scan code because a destroyed queue was sometimes being
  unplugged and run.

Or see this for log and patch:

http://linux.bkbits.net:8080/linux-2.5/cset@1.971.103.27?nav=index.html|ChangeSet@-2d

The patch won't apply cleanly on top of 2.5.67.

-- Patrick Mansfield