* [2.5.68-mm1] APM suspend/resume doesn't work properly
@ 2003-04-22 8:37 cb-lkml
0 siblings, 0 replies; only message in thread
From: cb-lkml @ 2003-04-22 8:37 UTC (permalink / raw)
To: linux-kernel
Hi
I tried 2.5.68-mm1 last night and found that after one suspend/resume cycle the
3c574_cs PCMCIA ethernet card didn't work. The only weirdness in the logs is
Apr 21 17:57:47 flat kernel: eth0: command 0x5800 did not complete!
Apr 21 17:58:18 flat last message repeated 1376 times
which appeared after resuming. Once the card was ejected/reinserted the card
worked fine.
After that the machine would not go into suspend state. 2.5.66-mm3 worked fine.
Didn't try suspend in 2.5.67-mm4.
On the plus side, the 3c574_cs driver fixes seem to work.
Sony Vaio, Celeron 333, Pre-empt, APM, 3c574_cs, Debian sid.
Charlie
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-04-22 8:24 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-04-22 8:37 [2.5.68-mm1] APM suspend/resume doesn't work properly cb-lkml
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®