* [PATCH] 2.6.0-test4 - Watchdog patches
@ 2003-08-31 20:52 Wim Van Sebroeck
2003-08-31 21:15 ` Justin Cormack
0 siblings, 1 reply; 4+ messages in thread
From: Wim Van Sebroeck @ 2003-08-31 20:52 UTC (permalink / raw)
To: torvalds; +Cc: linux-kernel
Hi Linus,
please do a
bk pull http://linux-watchdog.bkbits.net/linux-2.5-watchdog
This will update the following files:
drivers/char/watchdog/Kconfig | 12
drivers/char/watchdog/Makefile | 1
drivers/char/watchdog/acquirewdt.c | 230 ++++++++++-------
drivers/char/watchdog/advantechwdt.c | 2
drivers/char/watchdog/alim1535_wdt.c | 465 +++++++++++++++++++++++++++++++++++
drivers/char/watchdog/wafer5823wdt.c | 181 +++++++++----
6 files changed, 754 insertions(+), 137 deletions(-)
through these ChangeSets:
<wim@iguana.be> (03/08/30 1.1292)
[WATCHDOG] advantechwdt.c - patch
small clean-up (add trivial comma)
<wim@iguana.be> (03/08/30 1.1293)
[WATCHDOG] wafer5823wdt.c - patch
general clean-up (comments, trailing spaces, ...)
Added WATCHDOG_NAME and PFX defines for easier printk's.
clean-up printk's.
<wim@iguana.be> (03/08/30 1.1294)
[WATCHDOG] wafer5823wdt.c - patch2
fix possible wafwdt_is_open race
make wdt_stop and wdt_start module params
change wd_margin to timeout and make it a module_param
make expect_close the same system as in advantechwdt.c
clean-up ioctl handling
added extra printk's to report what problem occured
add MODULE_DESCRIPTION info
<wim@iguana.be> (03/08/31 1.1295)
[WATCHDOG] wafer5823wdt.c - patch3
fix MODULE_PARM_DESC for timeout
add WDIOC_SETOPTIONS functionality
<wim@iguana.be> (03/08/31 1.1296)
[WATCHDOG] acquirewdt.c - patch
clean-up of comments, trailing spaces, includes, ...
removed unnecessary spinlocking
added WATCHDOG_NAME + PFX defines for easier printk's
clean-up expect_close / acq_is_open
made wdt_stop and wdt_start a module_param
clean-up ioctl handling
clean-up init and exit routines
added MODULE_AUTHOR + MODULE_DESCRIPTION info
<wim@iguana.be> (03/08/31 1.1297)
[WATCHDOG] alim1535_wdt.c
Add "ALi M1535 PMU Watchdog Timer" driver
The ChangeSets can also be looked at on:
http://linux-watchdog.bkbits.net:8080/linux-2.5-watchdog
For completeness, I added the patches below.
Greetings,
Wim.
================================================================================
diff -Nru a/drivers/char/watchdog/advantechwdt.c b/drivers/char/watchdog/advantechwdt.c
--- a/drivers/char/watchdog/advantechwdt.c Sun Aug 31 22:46:08 2003
+++ b/drivers/char/watchdog/advantechwdt.c Sun Aug 31 22:46:08 2003
@@ -133,7 +133,7 @@
static struct watchdog_info ident = {
.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
.firmware_version = 1,
- .identity = "Advantech WDT"
+ .identity = "Advantech WDT",
};
switch (cmd) {
diff -Nru a/drivers/char/watchdog/wafer5823wdt.c b/drivers/char/watchdog/wafer5823wdt.c
--- a/drivers/char/watchdog/wafer5823wdt.c Sun Aug 31 22:46:28 2003
+++ b/drivers/char/watchdog/wafer5823wdt.c Sun Aug 31 22:46:28 2003
@@ -1,5 +1,5 @@
/*
- * ICP Wafer 5823 Single Board Computer WDT driver for Linux 2.4.x
+ * ICP Wafer 5823 Single Board Computer WDT driver
* http://www.icpamerica.com/wafer_5823.php
* May also work on other similar models
*
@@ -17,10 +17,10 @@
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
- *
- * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
- * warranty for any of this software. This material is provided
- * "AS-IS" and at no charge.
+ *
+ * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ * warranty for any of this software. This material is provided
+ * "AS-IS" and at no charge.
*
* (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>
*
@@ -39,6 +39,10 @@
#include <asm/io.h>
#include <asm/uaccess.h>
+#define WATCHDOG_NAME "Wafer 5823 WDT"
+#define PFX WATCHDOG_NAME ": "
+#define WD_TIMO 60 /* 60 sec default timeout */
+
static unsigned long wafwdt_is_open;
static spinlock_t wafwdt_lock;
static int expect_close = 0;
@@ -55,7 +59,6 @@
#define WDT_START 0x443
#define WDT_STOP 0x843
-#define WD_TIMO 60 /* 1 minute */
static int wd_margin = WD_TIMO;
#ifdef CONFIG_WATCHDOG_NOWAYOUT
@@ -124,7 +127,7 @@
static struct watchdog_info ident = {
.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
.firmware_version = 1,
- .identity = "Wafer 5823 WDT"
+ .identity = "Wafer 5823 WDT",
};
int one=1;
@@ -174,10 +177,10 @@
wafwdt_close(struct inode *inode, struct file *file)
{
clear_bit(0, &wafwdt_is_open);
- if (expect_close) {
+ if (expect_close) {
wafwdt_stop();
} else {
- printk(KERN_CRIT "WDT device closed unexpectedly. WDT will not stop!\n");
+ printk(KERN_CRIT PFX "WDT device closed unexpectedly. WDT will not stop!\n");
}
return 0;
}
@@ -201,6 +204,7 @@
static struct file_operations wafwdt_fops = {
.owner = THIS_MODULE,
+ .llseek = no_llseek,
.write = wafwdt_write,
.ioctl = wafwdt_ioctl,
.open = wafwdt_open,
@@ -210,23 +214,23 @@
static struct miscdevice wafwdt_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
- .fops = &wafwdt_fops
+ .fops = &wafwdt_fops,
};
/*
* The WDT needs to learn about soft shutdowns in order to
- * turn the timebomb registers off.
+ * turn the timebomb registers off.
*/
static struct notifier_block wafwdt_notifier = {
.notifier_call = wafwdt_notify_sys,
.next = NULL,
- .priority = 0
+ .priority = 0,
};
static int __init wafwdt_init(void)
{
- printk(KERN_INFO "WDT driver for Wafer 5823 single board computer initialising.\n");
+ printk(KERN_INFO PFX "WDT driver for Wafer 5823 single board computer initialising.\n");
spin_lock_init(&wafwdt_lock);
if(!request_region(WDT_STOP, 1, "Wafer 5823 WDT"))
diff -Nru a/drivers/char/watchdog/wafer5823wdt.c b/drivers/char/watchdog/wafer5823wdt.c
--- a/drivers/char/watchdog/wafer5823wdt.c Sun Aug 31 22:46:47 2003
+++ b/drivers/char/watchdog/wafer5823wdt.c Sun Aug 31 22:46:47 2003
@@ -44,8 +44,8 @@
#define WD_TIMO 60 /* 60 sec default timeout */
static unsigned long wafwdt_is_open;
+static char expect_close;
static spinlock_t wafwdt_lock;
-static int expect_close = 0;
/*
* You must set these - there is no sane way to probe for this board.
@@ -56,10 +56,17 @@
* to restart it again.
*/
-#define WDT_START 0x443
-#define WDT_STOP 0x843
-
-static int wd_margin = WD_TIMO;
+static int wdt_stop = 0x843;
+module_param(wdt_stop, int, 0);
+MODULE_PARM_DESC(wdt_stop, "Wafer 5823 WDT 'stop' io port (default 0x843)");
+
+static int wdt_start = 0x443;
+module_param(wdt_start, int, 0);
+MODULE_PARM_DESC(wdt_start, "Wafer 5823 WDT 'start' io port (default 0x443)");
+
+static int timeout = WD_TIMO; /* in seconds */
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
#ifdef CONFIG_WATCHDOG_NOWAYOUT
static int nowayout = 1;
@@ -73,24 +80,24 @@
static void wafwdt_ping(void)
{
/* pat watchdog */
- spin_lock(&wafwdt_lock);
- inb_p(WDT_STOP);
- inb_p(WDT_START);
- spin_unlock(&wafwdt_lock);
+ spin_lock(&wafwdt_lock);
+ inb_p(wdt_stop);
+ inb_p(wdt_start);
+ spin_unlock(&wafwdt_lock);
}
static void wafwdt_start(void)
{
/* start up watchdog */
- outb_p(wd_margin, WDT_START);
- inb_p(WDT_START);
+ outb_p(timeout, wdt_start);
+ inb_p(wdt_start);
}
static void
wafwdt_stop(void)
{
/* stop watchdog */
- inb_p(WDT_STOP);
+ inb_p(wdt_stop);
}
static ssize_t wafwdt_write(struct file *file, const char *buf, size_t count, loff_t * ppos)
@@ -99,6 +106,7 @@
if (ppos != &file->f_pos)
return -ESPIPE;
+ /* See if we got the magic character 'V' and reload the timer */
if (count) {
if (!nowayout) {
size_t i;
@@ -106,30 +114,30 @@
/* In case it was set long ago */
expect_close = 0;
+ /* scan to see wether or not we got the magic character */
for (i = 0; i != count; i++) {
char c;
if (get_user(c, buf + i))
return -EFAULT;
if (c == 'V')
- expect_close = 1;
+ expect_close = 42;
}
}
+ /* Well, anyhow someone wrote to us, we should return that favour */
wafwdt_ping();
- return 1;
}
- return 0;
+ return count;
}
static int wafwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
unsigned long arg)
{
- int new_margin;
+ int new_timeout;
static struct watchdog_info ident = {
.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
.firmware_version = 1,
.identity = "Wafer 5823 WDT",
};
- int one=1;
switch (cmd) {
case WDIOC_GETSUPPORT:
@@ -139,25 +147,24 @@
break;
case WDIOC_GETSTATUS:
- if (copy_to_user((int *) arg, &one, sizeof (int)))
- return -EFAULT;
- break;
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, (int *)arg);
case WDIOC_KEEPALIVE:
wafwdt_ping();
break;
case WDIOC_SETTIMEOUT:
- if (get_user(new_margin, (int *)arg))
+ if (get_user(new_timeout, (int *)arg))
return -EFAULT;
- if ((new_margin < 1) || (new_margin > 255))
+ if ((new_timeout < 1) || (new_timeout > 255))
return -EINVAL;
- wd_margin = new_margin;
+ timeout = new_timeout;
wafwdt_stop();
wafwdt_start();
/* Fall */
case WDIOC_GETTIMEOUT:
- return put_user(wd_margin, (int *)arg);
+ return put_user(timeout, (int *)arg);
default:
return -ENOTTY;
@@ -169,6 +176,10 @@
{
if (test_and_set_bit(0, &wafwdt_is_open))
return -EBUSY;
+
+ /*
+ * Activate
+ */
wafwdt_start();
return 0;
}
@@ -176,12 +187,14 @@
static int
wafwdt_close(struct inode *inode, struct file *file)
{
- clear_bit(0, &wafwdt_is_open);
- if (expect_close) {
+ if (expect_close == 42) {
wafwdt_stop();
} else {
printk(KERN_CRIT PFX "WDT device closed unexpectedly. WDT will not stop!\n");
+ wafwdt_ping();
}
+ clear_bit(0, &wafwdt_is_open);
+ expect_close = 0;
return 0;
}
@@ -230,37 +243,77 @@
static int __init wafwdt_init(void)
{
- printk(KERN_INFO PFX "WDT driver for Wafer 5823 single board computer initialising.\n");
+ int ret;
+
+ printk(KERN_INFO "WDT driver for Wafer 5823 single board computer initialising.\n");
spin_lock_init(&wafwdt_lock);
- if(!request_region(WDT_STOP, 1, "Wafer 5823 WDT"))
- goto error;
- if(!request_region(WDT_START, 1, "Wafer 5823 WDT"))
+
+ if (timeout < 1 || timeout > 63) {
+ timeout = WD_TIMO;
+ printk (KERN_INFO PFX "timeout value must be 1<=x<=255, using %d\n",
+ timeout);
+ }
+
+ if (wdt_stop != wdt_start) {
+ if(!request_region(wdt_stop, 1, "Wafer 5823 WDT")) {
+ printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
+ wdt_stop);
+ ret = -EIO;
+ goto error;
+ }
+ }
+
+ if(!request_region(wdt_start, 1, "Wafer 5823 WDT")) {
+ printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
+ wdt_start);
+ ret = -EIO;
goto error2;
- if(misc_register(&wafwdt_miscdev)<0)
+ }
+
+ ret = register_reboot_notifier(&wafwdt_notifier);
+ if (ret != 0) {
+ printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
+ ret);
goto error3;
- register_reboot_notifier(&wafwdt_notifier);
- return 0;
+ }
+
+ ret = misc_register(&wafwdt_miscdev);
+ if (ret != 0) {
+ printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+ WATCHDOG_MINOR, ret);
+ goto error4;
+ }
+
+ printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
+ timeout, nowayout);
+
+ return ret;
+error4:
+ unregister_reboot_notifier(&wafwdt_notifier);
error3:
- release_region(WDT_START, 1);
+ release_region(wdt_start, 1);
error2:
- release_region(WDT_STOP, 1);
+ if (wdt_stop != wdt_start)
+ release_region(wdt_stop, 1);
error:
- return -ENODEV;
+ return ret;
}
static void __exit wafwdt_exit(void)
{
misc_deregister(&wafwdt_miscdev);
unregister_reboot_notifier(&wafwdt_notifier);
- release_region(WDT_STOP, 1);
- release_region(WDT_START, 1);
+ if(wdt_stop != wdt_start)
+ release_region(wdt_stop, 1);
+ release_region(wdt_start, 1);
}
module_init(wafwdt_init);
module_exit(wafwdt_exit);
MODULE_AUTHOR("Justin Cormack");
+MODULE_DESCRIPTION("ICP Wafer 5823 Single Board Computer WDT driver");
MODULE_LICENSE("GPL");
/* end of wafer5823wdt.c */
diff -Nru a/drivers/char/watchdog/wafer5823wdt.c b/drivers/char/watchdog/wafer5823wdt.c
--- a/drivers/char/watchdog/wafer5823wdt.c Sun Aug 31 22:47:06 2003
+++ b/drivers/char/watchdog/wafer5823wdt.c Sun Aug 31 22:47:06 2003
@@ -66,7 +66,7 @@
static int timeout = WD_TIMO; /* in seconds */
module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WD_TIMO) ".");
#ifdef CONFIG_WATCHDOG_NOWAYOUT
static int nowayout = 1;
@@ -165,6 +165,26 @@
/* Fall */
case WDIOC_GETTIMEOUT:
return put_user(timeout, (int *)arg);
+
+ case WDIOC_SETOPTIONS:
+ {
+ int options, retval = -EINVAL;
+
+ if (get_user(options, (int *)arg))
+ return -EFAULT;
+
+ if (options & WDIOS_DISABLECARD) {
+ wafwdt_start();
+ retval = 0;
+ }
+
+ if (options & WDIOS_ENABLECARD) {
+ wafwdt_stop();
+ retval = 0;
+ }
+
+ return retval;
+ }
default:
return -ENOTTY;
diff -Nru a/drivers/char/watchdog/acquirewdt.c b/drivers/char/watchdog/acquirewdt.c
--- a/drivers/char/watchdog/acquirewdt.c Sun Aug 31 22:47:25 2003
+++ b/drivers/char/watchdog/acquirewdt.c Sun Aug 31 22:47:25 2003
@@ -1,5 +1,5 @@
/*
- * Acquire Single Board Computer Watchdog Timer driver for Linux 2.1.x
+ * Acquire Single Board Computer Watchdog Timer driver
*
* Based on wdt.c. Original copyright messages:
*
@@ -10,10 +10,10 @@
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
- *
- * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
- * warranty for any of this software. This material is provided
- * "AS-IS" and at no charge.
+ *
+ * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ * warranty for any of this software. This material is provided
+ * "AS-IS" and at no charge.
*
* (c) Copyright 1995 Alan Cox <alan@redhat.com>
*
@@ -22,33 +22,39 @@
* Can't add timeout - driver doesn't allow changing value
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
+#include <linux/fs.h>
#include <linux/ioport.h>
#include <linux/notifier.h>
-#include <linux/fs.h>
#include <linux/reboot.h>
#include <linux/init.h>
-#include <linux/spinlock.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
-static int acq_is_open;
-static spinlock_t acq_lock;
-static int expect_close = 0;
+#define WATCHDOG_NAME "Acquire WDT"
+#define PFX WATCHDOG_NAME ": "
+#define WATCHDOG_TIMEOUT 0 /* ??? Is the timeout hardcoded to 1 minute ??? */
+
+static unsigned long acq_is_open;
+static char expect_close;
/*
* You must set these - there is no sane way to probe for this board.
*/
-
-#define WDT_STOP 0x43
-#define WDT_START 0x443
+
+static int wdt_stop = 0x43;
+module_param(wdt_stop, int, 0);
+MODULE_PARM_DESC(wdt_stop, "Acquire WDT 'stop' io port (default 0x43)");
+
+static int wdt_start = 0x443;
+module_param(wdt_start, int, 0);
+MODULE_PARM_DESC(wdt_start, "Acquire WDT 'start' io port (default 0x443)");
#ifdef CONFIG_WATCHDOG_NOWAYOUT
static int nowayout = 1;
@@ -62,38 +68,52 @@
/*
* Kernel methods.
*/
-
static void acq_ping(void)
{
/* Write a watchdog value */
- inb_p(WDT_START);
+ inb_p(wdt_start);
}
+static void acq_stop(void)
+{
+ /* Turn the card off */
+ inb_p(wdt_stop);
+}
+
+/*
+ * /dev/watchdog handling.
+ */
+
static ssize_t acq_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
{
/* Can't seek (pwrite) on this device */
if (ppos != &file->f_pos)
return -ESPIPE;
+ /* See if we got the magic character 'V' and reload the timer */
if(count) {
if (!nowayout) {
size_t i;
+ /* note: just in case someone wrote the magic character
+ * five months ago... */
expect_close = 0;
+ /* scan to see wether or not we got the magic character */
for (i = 0; i != count; i++) {
char c;
if (get_user(c, buf + i))
return -EFAULT;
if (c == 'V')
- expect_close = 1;
+ expect_close = 42;
}
}
+
+ /* Well, anyhow someone wrote to us, we should return that favour */
acq_ping();
- return 1;
}
- return 0;
+ return count;
}
static int acq_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
@@ -103,65 +123,75 @@
{
.options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
.firmware_version = 1,
- .identity = "Acquire WDT"
+ .identity = "Acquire WDT",
};
-
+
switch(cmd)
{
case WDIOC_GETSUPPORT:
- if (copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident)))
- return -EFAULT;
- break;
-
+ return copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident)) ? -EFAULT : 0;
+
case WDIOC_GETSTATUS:
- if (copy_to_user((int *)arg, &acq_is_open, sizeof(int)))
- return -EFAULT;
- break;
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, (int *)arg);
case WDIOC_KEEPALIVE:
acq_ping();
- break;
+ return 0;
+
+ case WDIOC_GETTIMEOUT:
+ return put_user(WATCHDOG_TIMEOUT, (int *)arg);
+
+ case WDIOC_SETOPTIONS:
+ {
+ int options, retval = -EINVAL;
+
+ if (get_user(options, (int *)arg))
+ return -EFAULT;
+
+ if (options & WDIOS_DISABLECARD)
+ {
+ acq_stop();
+ retval = 0;
+ }
+
+ if (options & WDIOS_ENABLECARD)
+ {
+ acq_ping();
+ retval = 0;
+ }
+
+ return retval;
+ }
default:
- return -ENOTTY;
+ return -ENOIOCTLCMD;
}
- return 0;
}
static int acq_open(struct inode *inode, struct file *file)
{
- if ((minor(inode->i_rdev) == WATCHDOG_MINOR)) {
- spin_lock(&acq_lock);
- if(acq_is_open) {
- spin_unlock(&acq_lock);
- return -EBUSY;
- }
- if (nowayout)
- __module_get(THIS_MODULE);
+ if (test_and_set_bit(0, &acq_is_open))
+ return -EBUSY;
- /* Activate */
- acq_is_open=1;
- inb_p(WDT_START);
- spin_unlock(&acq_lock);
- return 0;
+ if (nowayout)
+ __module_get(THIS_MODULE);
- } else {
- return -ENODEV;
- }
+ /* Activate */
+ acq_ping();
+ return 0;
}
static int acq_close(struct inode *inode, struct file *file)
{
- if(minor(inode->i_rdev)==WATCHDOG_MINOR) {
- spin_lock(&acq_lock);
- if (expect_close)
- inb_p(WDT_STOP);
- else
- printk(KERN_CRIT "WDT closed unexpectedly. WDT will not stop!\n");
-
- acq_is_open=0;
- spin_unlock(&acq_lock);
+ if (expect_close == 42) {
+ acq_stop();
+ } else {
+ printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+ acq_ping();
}
+ clear_bit(0, &acq_is_open);
+ expect_close = 0;
return 0;
}
@@ -172,20 +202,20 @@
static int acq_notify_sys(struct notifier_block *this, unsigned long code,
void *unused)
{
- if(code==SYS_DOWN || code==SYS_HALT)
- /* Turn the card off */
- inb_p(WDT_STOP);
-
+ if(code==SYS_DOWN || code==SYS_HALT) {
+ /* Turn the WDT off */
+ acq_stop();
+ }
return NOTIFY_DONE;
}
-
+
/*
* Kernel Interfaces
*/
-
-
+
static struct file_operations acq_fops = {
.owner = THIS_MODULE,
+ .llseek = no_llseek,
.write = acq_write,
.ioctl = acq_ioctl,
.open = acq_open,
@@ -196,52 +226,84 @@
{
.minor = WATCHDOG_MINOR,
.name = "watchdog",
- .fops = &acq_fops
+ .fops = &acq_fops,
};
-
/*
* The WDT card needs to learn about soft shutdowns in order to
- * turn the timebomb registers off.
+ * turn the timebomb registers off.
*/
-
+
static struct notifier_block acq_notifier =
{
.notifier_call = acq_notify_sys,
.next = NULL,
- .priority = 0
+ .priority = 0,
};
static int __init acq_init(void)
{
+ int ret;
+
printk(KERN_INFO "WDT driver for Acquire single board computer initialising.\n");
- spin_lock_init(&acq_lock);
- if (misc_register(&acq_miscdev))
- return -ENODEV;
- if (!request_region(WDT_STOP, 1, "Acquire WDT")) {
- misc_deregister(&acq_miscdev);
- return -EIO;
- }
- if (!request_region(WDT_START, 1, "Acquire WDT")) {
- release_region(WDT_STOP, 1);
- misc_deregister(&acq_miscdev);
- return -EIO;
+ if (wdt_stop != wdt_start) {
+ if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) {
+ printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
+ wdt_stop);
+ ret = -EIO;
+ goto out;
+ }
}
- register_reboot_notifier(&acq_notifier);
- return 0;
+ if (!request_region(wdt_start, 1, WATCHDOG_NAME)) {
+ printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
+ wdt_start);
+ ret = -EIO;
+ goto unreg_stop;
+ }
+
+ ret = register_reboot_notifier(&acq_notifier);
+ if (ret != 0) {
+ printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
+ ret);
+ goto unreg_regions;
+ }
+
+ ret = misc_register(&acq_miscdev);
+ if (ret != 0) {
+ printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+ WATCHDOG_MINOR, ret);
+ goto unreg_reboot;
+ }
+
+ printk (KERN_INFO PFX "initialized. (nowayout=%d)\n",
+ nowayout);
+
+out:
+ return ret;
+unreg_reboot:
+ unregister_reboot_notifier(&acq_notifier);
+unreg_regions:
+ release_region(wdt_start, 1);
+unreg_stop:
+ if (wdt_stop != wdt_start)
+ release_region(wdt_stop, 1);
+ goto out;
}
-
+
static void __exit acq_exit(void)
{
misc_deregister(&acq_miscdev);
unregister_reboot_notifier(&acq_notifier);
- release_region(WDT_STOP,1);
- release_region(WDT_START,1);
+ if(wdt_stop != wdt_start)
+ release_region(wdt_stop,1);
+ release_region(wdt_start,1);
}
module_init(acq_init);
module_exit(acq_exit);
MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Unkown");
+MODULE_DESCRIPTION("Acquire Single Board Computer Watchdog Timer driver");
diff -Nru a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
--- a/drivers/char/watchdog/Kconfig Sun Aug 31 22:47:44 2003
+++ b/drivers/char/watchdog/Kconfig Sun Aug 31 22:47:44 2003
@@ -346,6 +346,18 @@
module, say M here and read <file:Documentation/modules.txt>. Most
people will say N.
+config ALIM1535_WDT
+ tristate "ALi M1535 PMU Watchdog Timer"
+ depends on WATCHDOG
+ ---help---
+ This is the driver for the hardware watchdog on the ALi M1535 PMU.
+
+ This driver is also available as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module is called alim1535_wdt. If you want to compile it as a
+ module, say M here and read <file:Documentation/modules.txt>. Most
+ people will say N.
+
config SC1200_WDT
tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
depends on WATCHDOG
diff -Nru a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile
--- a/drivers/char/watchdog/Makefile Sun Aug 31 22:47:44 2003
+++ b/drivers/char/watchdog/Makefile Sun Aug 31 22:47:44 2003
@@ -27,6 +27,7 @@
obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
+obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o
obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
diff -Nru a/drivers/char/watchdog/alim1535_wdt.c b/drivers/char/watchdog/alim1535_wdt.c
--- /dev/null Wed Dec 31 16:00:00 1969
+++ b/drivers/char/watchdog/alim1535_wdt.c Sun Aug 31 22:47:44 2003
@@ -0,0 +1,465 @@
+/*
+ * Watchdog for the 7101 PMU version found in the ALi M1535 chipsets
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/ioport.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+#define WATCHDOG_NAME "ALi_M1535"
+#define PFX WATCHDOG_NAME ": "
+#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
+
+/* internal variables */
+static unsigned long ali_is_open;
+static char ali_expect_release;
+static struct pci_dev *ali_pci;
+static u32 ali_timeout_bits; /* stores the computed timeout */
+static spinlock_t ali_lock; /* Guards the hardware */
+
+/* module parameters */
+static int timeout = WATCHDOG_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (0<timeout<18000, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+
+#ifdef CONFIG_WATCHDOG_NOWAYOUT
+static int nowayout = 1;
+#else
+static int nowayout = 0;
+#endif
+
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
+
+/*
+ * ali_start - start watchdog countdown
+ *
+ * Starts the timer running providing the timer has a counter
+ * configuration set.
+ */
+
+static void ali_start(void)
+{
+ u32 val;
+
+ spin_lock(&ali_lock);
+
+ pci_read_config_dword(ali_pci, 0xCC, &val);
+ val &= ~0x3F; /* Mask count */
+ val |= (1<<25) | ali_timeout_bits;
+ pci_write_config_dword(ali_pci, 0xCC, val);
+
+ spin_unlock(&ali_lock);
+}
+
+/*
+ * ali_stop - stop the timer countdown
+ *
+ * Stop the ALi watchdog countdown
+ */
+
+static void ali_stop(void)
+{
+ u32 val;
+
+ spin_lock(&ali_lock);
+
+ pci_read_config_dword(ali_pci, 0xCC, &val);
+ val &= ~0x3F; /* Mask count to zero (disabled) */
+ val &= ~(1<<25);/* and for safety mask the reset enable */
+ pci_write_config_dword(ali_pci, 0xCC, val);
+
+ spin_unlock(&ali_lock);
+}
+
+/*
+ * ali_keepalive - send a keepalive to the watchdog
+ *
+ * Send a keepalive to the timer (actually we restart the timer).
+ */
+
+static void ali_keepalive(void)
+{
+ ali_start();
+}
+
+/*
+ * ali_settimer - compute the timer reload value
+ * @t: time in seconds
+ *
+ * Computes the timeout values needed
+ */
+
+static int ali_settimer(int t)
+{
+ if(t < 0)
+ return -EINVAL;
+ else if(t < 60)
+ ali_timeout_bits = t|(1<<6);
+ else if(t < 3600)
+ ali_timeout_bits = (t/60)|(1<<7);
+ else if(t < 18000)
+ ali_timeout_bits = (t/300)|(1<<6)|(1<<7);
+ else return -EINVAL;
+
+ timeout = t;
+ return 0;
+}
+
+/*
+ * /dev/watchdog handling
+ */
+
+/*
+ * ali_write - writes to ALi watchdog
+ * @file: file from VFS
+ * @data: user address of data
+ * @len: length of data
+ * @ppos: pointer to the file offset
+ *
+ * Handle a write to the ALi watchdog. Writing to the file pings
+ * the watchdog and resets it. Writing the magic 'V' sequence allows
+ * the next close to turn off the watchdog.
+ */
+
+static ssize_t ali_write(struct file *file, const char *data,
+ size_t len, loff_t * ppos)
+{
+ /* Can't seek (pwrite) on this device */
+ if (ppos != &file->f_pos)
+ return -ESPIPE;
+
+ /* See if we got the magic character 'V' and reload the timer */
+ if (len) {
+ if (!nowayout) {
+ size_t i;
+
+ /* note: just in case someone wrote the magic character
+ * five months ago... */
+ ali_expect_release = 0;
+
+ /* scan to see wether or not we got the magic character */
+ for (i = 0; i != len; i++) {
+ char c;
+ if(get_user(c, data+i))
+ return -EFAULT;
+ if (c == 'V')
+ ali_expect_release = 42;
+ }
+ }
+
+ /* someone wrote to us, we should reload the timer */
+ ali_start();
+ }
+ return len;
+}
+
+/*
+ * ali_ioctl - handle watchdog ioctls
+ * @inode: VFS inode
+ * @file: VFS file pointer
+ * @cmd: ioctl number
+ * @arg: arguments to the ioctl
+ *
+ * Handle the watchdog ioctls supported by the ALi driver. Really
+ * we want an extension to enable irq ack monitoring and the like
+ */
+
+static int ali_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ static struct watchdog_info ident = {
+ .options = WDIOF_KEEPALIVEPING |
+ WDIOF_SETTIMEOUT |
+ WDIOF_MAGICCLOSE,
+ .firmware_version = 0,
+ .identity = "ALi M1535 WatchDog Timer",
+ };
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ return copy_to_user((struct watchdog_info *) arg, &ident,
+ sizeof (ident)) ? -EFAULT : 0;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, (int *) arg);
+
+ case WDIOC_KEEPALIVE:
+ ali_keepalive();
+ return 0;
+
+ case WDIOC_SETOPTIONS:
+ {
+ int new_options, retval = -EINVAL;
+
+ if (get_user (new_options, (int *) arg))
+ return -EFAULT;
+
+ if (new_options & WDIOS_DISABLECARD) {
+ ali_stop();
+ retval = 0;
+ }
+
+ if (new_options & WDIOS_ENABLECARD) {
+ ali_start();
+ retval = 0;
+ }
+
+ return retval;
+ }
+
+ case WDIOC_SETTIMEOUT:
+ {
+ int new_timeout;
+
+ if (get_user(new_timeout, (int *) arg))
+ return -EFAULT;
+
+ if (ali_settimer(new_timeout))
+ return -EINVAL;
+
+ ali_keepalive();
+ /* Fall */
+ }
+
+ case WDIOC_GETTIMEOUT:
+ return put_user(timeout, (int *)arg);
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+
+/*
+ * ali_open - handle open of ali watchdog
+ * @inode: inode from VFS
+ * @file: file from VFS
+ *
+ * Open the ALi watchdog device. Ensure only one person opens it
+ * at a time. Also start the watchdog running.
+ */
+
+static int ali_open(struct inode *inode, struct file *file)
+{
+ /* /dev/watchdog can only be opened once */
+ if (test_and_set_bit(0, &ali_is_open))
+ return -EBUSY;
+
+ /* Activate */
+ ali_start();
+ return 0;
+}
+
+/*
+ * ali_release - close an ALi watchdog
+ * @inode: inode from VFS
+ * @file: file from VFS
+ *
+ * Close the ALi watchdog device. Actual shutdown of the timer
+ * only occurs if the magic sequence has been set.
+ */
+
+static int ali_release(struct inode *inode, struct file *file)
+{
+ /*
+ * Shut off the timer.
+ */
+ if (ali_expect_release == 42) {
+ ali_stop();
+ } else {
+ printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+ ali_keepalive();
+ }
+ clear_bit(0, &ali_is_open);
+ ali_expect_release = 0;
+ return 0;
+}
+
+/*
+ * ali_notify_sys - System down notifier
+ *
+ * Notifier for system down
+ */
+
+
+static int ali_notify_sys(struct notifier_block *this, unsigned long code, void *unused)
+{
+ if (code==SYS_DOWN || code==SYS_HALT) {
+ /* Turn the WDT off */
+ ali_stop();
+ }
+
+ return NOTIFY_DONE;
+}
+
+/*
+ * Data for PCI driver interface
+ *
+ * This data only exists for exporting the supported
+ * PCI ids via MODULE_DEVICE_TABLE. We do not actually
+ * register a pci_driver, because someone else might one day
+ * want to register another driver on the same PCI id.
+ */
+
+static struct pci_device_id ali_pci_tbl[] __initdata = {
+ { PCI_VENDOR_ID_AL, 1535, PCI_ANY_ID, PCI_ANY_ID,},
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, ali_pci_tbl);
+
+/*
+ * ali_find_watchdog - find a 1535 and 7101
+ *
+ * Scans the PCI hardware for a 1535 series bridge and matching 7101
+ * watchdog device. This may be overtight but it is better to be safe
+ */
+
+static int __init ali_find_watchdog(void)
+{
+ struct pci_dev *pdev;
+ u32 wdog;
+
+ /* Check for a 1535 series bridge */
+ pdev = pci_find_device(PCI_VENDOR_ID_AL, 0x1535, NULL);
+ if(pdev == NULL)
+ return -ENODEV;
+
+ /* Check for the a 7101 PMU */
+ pdev = pci_find_device(PCI_VENDOR_ID_AL, 0x7101, NULL);
+ if(pdev == NULL)
+ return -ENODEV;
+
+ if(pci_enable_device(pdev))
+ return -EIO;
+
+ ali_pci = pdev;
+
+ /*
+ * Initialize the timer bits
+ */
+ pci_read_config_dword(pdev, 0xCC, &wdog);
+
+ wdog &= ~0x3F; /* Timer bits */
+ wdog &= ~((1<<27)|(1<<26)|(1<<25)|(1<<24)); /* Issued events */
+ wdog &= ~((1<<16)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9)); /* No monitor bits */
+
+ pci_write_config_dword(pdev, 0xCC, wdog);
+
+ return 0;
+}
+
+/*
+ * Kernel Interfaces
+ */
+
+static struct file_operations ali_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = ali_write,
+ .ioctl = ali_ioctl,
+ .open = ali_open,
+ .release = ali_release,
+};
+
+static struct miscdevice ali_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &ali_fops,
+};
+
+static struct notifier_block ali_notifier = {
+ .notifier_call = ali_notify_sys,
+ .next = NULL,
+ .priority = 0,
+};
+
+/*
+ * watchdog_init - module initialiser
+ *
+ * Scan for a suitable watchdog and if so initialize it. Return an error
+ * if we cannot, the error causes the module to unload
+ */
+
+static int __init watchdog_init(void)
+{
+ int ret;
+
+ spin_lock_init(&ali_lock);
+
+ /* Check wether or not the hardware watchdog is there */
+ if (ali_find_watchdog() != 0) {
+ return -ENODEV;
+ }
+
+ /* Check that the timeout value is within it's range ; if not reset to the default */
+ if (timeout < 1 || timeout >= 18000) {
+ timeout = WATCHDOG_TIMEOUT;
+ printk(KERN_INFO PFX "timeout value must be 0<timeout<18000, using %d\n",
+ timeout);
+ }
+
+ /* Calculate the watchdog's timeout */
+ ali_settimer(timeout);
+
+ ret = misc_register(&ali_miscdev);
+ if (ret != 0) {
+ printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+ WATCHDOG_MINOR, ret);
+ goto out;
+ }
+
+ ret = register_reboot_notifier(&ali_notifier);
+ if (ret != 0) {
+ printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
+ ret);
+ goto unreg_miscdev;
+ }
+
+ printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
+ timeout, nowayout);
+
+out:
+ return ret;
+unreg_miscdev:
+ misc_deregister(&ali_miscdev);
+ goto out;
+}
+
+/*
+ * watchdog_exit - module de-initialiser
+ *
+ * Called while unloading a successfully installed watchdog module.
+ */
+
+static void __exit watchdog_exit(void)
+{
+ /* Stop the timer before we leave */
+ ali_stop();
+
+ /* Deregister */
+ unregister_reboot_notifier(&ali_notifier);
+ misc_deregister(&ali_miscdev);
+}
+
+module_init(watchdog_init);
+module_exit(watchdog_exit);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("ALi M1535 PMU Watchdog Timer driver");
+MODULE_LICENSE("GPL");
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] 2.6.0-test4 - Watchdog patches
2003-08-31 20:52 [PATCH] 2.6.0-test4 - Watchdog patches Wim Van Sebroeck
@ 2003-08-31 21:15 ` Justin Cormack
2003-09-03 19:54 ` Wim Van Sebroeck
0 siblings, 1 reply; 4+ messages in thread
From: Justin Cormack @ 2003-08-31 21:15 UTC (permalink / raw)
To: Wim Van Sebroeck; +Cc: torvalds, Kernel mailing list
On Sun, 2003-08-31 at 21:52, Wim Van Sebroeck wrote:
= 0;
>
> /*
> * You must set these - there is no sane way to probe for this board.
> @@ -56,10 +56,17 @@
> * to restart it again.
> */
>
> -#define WDT_START 0x443
> -#define WDT_STOP 0x843
> -
> -static int wd_margin = WD_TIMO;
> +static int wdt_stop = 0x843;
> +module_param(wdt_stop, int, 0);
> +MODULE_PARM_DESC(wdt_stop, "Wafer 5823 WDT 'stop' io port (default 0x843)");
> +
> +static int wdt_start = 0x443;
> +module_param(wdt_start, int, 0);
> +MODULE_PARM_DESC(wdt_start, "Wafer 5823 WDT 'start' io port (default 0x443)");
There is *no point* making these module parameters. There is no other
watchdog that works in exactly the same way but using different io
ports. If there was this still wouldnt be the sensible way to do it.
> + if (timeout < 1 || timeout > 63) {
> + timeout = WD_TIMO;
> + printk (KERN_INFO PFX "timeout value must be 1<=x<=255, using %d\n",
> + timeout);
where did that 63 come from? should be 255.
Also, generally, please cc authors when you send patches. And making the comments the
same in the watchdog drivers is a complete waste of time. If you want to reduce
the amount of duplicated code in the drivers you could make a watchdog_ops interface
for almost all of them.
Justin
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] 2.6.0-test4 - Watchdog patches
2003-08-31 21:15 ` Justin Cormack
@ 2003-09-03 19:54 ` Wim Van Sebroeck
2003-09-05 0:48 ` Rob Radez
0 siblings, 1 reply; 4+ messages in thread
From: Wim Van Sebroeck @ 2003-09-03 19:54 UTC (permalink / raw)
To: Justin Cormack; +Cc: torvalds, Kernel mailing list, Rob Radez
Hi Justin,
> There is *no point* making these module parameters. There is no other
> watchdog that works in exactly the same way but using different io
> ports. If there was this still wouldnt be the sensible way to do it.
Since I copied this part of Rob's watchdog-patch, I'll let Rob answer this one.
> > + if (timeout < 1 || timeout > 63) {
> > + timeout = WD_TIMO;
> > + printk (KERN_INFO PFX "timeout value must be 1<=x<=255, using %d\n",
> > + timeout);
>
> where did that 63 come from? should be 255.
Thanks, I'll fix this (And I'll take out the module_param's for wdt_start and wdt_stop
also).
> Also, generally, please cc authors when you send patches. And making the comments the
> same in the watchdog drivers is a complete waste of time. If you want to reduce
> the amount of duplicated code in the drivers you could make a watchdog_ops interface
> for almost all of them.
Sorry Justin, I normally cc the authors, but this time I indeed overlooked it. Sorry
for that. Concerning the duplicated code: this is done intentionally; Rob and myself
won't to get the watchdog-drivers all at the same level so that we can then remove the
duplicate code and have some generic watchdog code that can be used (I allready have
code for it, but I'm redoing the temperature stuff). After that we plan to foresee sysfs
interfacing for the drivers (can be done easily if you use the generic watchdog code).
the generic code indeed uses a watchdog_ops like interface. Hope this clarifies things
a bit more. (So I try to do everything via a "phased" approach rather then go directly
for the generic watchdog model code).
Greetings,
Wim.
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] 2.6.0-test4 - Watchdog patches
2003-09-03 19:54 ` Wim Van Sebroeck
@ 2003-09-05 0:48 ` Rob Radez
0 siblings, 0 replies; 4+ messages in thread
From: Rob Radez @ 2003-09-05 0:48 UTC (permalink / raw)
To: Wim Van Sebroeck; +Cc: Justin Cormack, Kernel mailing list
On Wed, Sep 03, 2003 at 09:54:10PM +0200, Wim Van Sebroeck wrote:
> Hi Justin,
>
> > There is *no point* making these module parameters. There is no other
> > watchdog that works in exactly the same way but using different io
> > ports. If there was this still wouldnt be the sensible way to do it.
>
> Since I copied this part of Rob's watchdog-patch, I'll let Rob answer this one.
Mostly, it was because I didn't know that there weren't any other
implementations of this watchdog that might use slightly different
ports. If there aren't, then my apologies for unnecessary complication
of the code.
Regards,
Rob Radez
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2003-09-05 0:48 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-08-31 20:52 [PATCH] 2.6.0-test4 - Watchdog patches Wim Van Sebroeck
2003-08-31 21:15 ` Justin Cormack
2003-09-03 19:54 ` Wim Van Sebroeck
2003-09-05 0:48 ` Rob Radez
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®